CZTS layers formed under sulfur-limited conditions at above atmospheric pressure
Source abstract
Abstract
Abstract In this study CZTS thin films were grown by a two-stage process that involved sequential sputter deposition of metallic Cu, Zn, and Sn layers on Mo coated glass substrates followed by RTP annealing in a sulfur atmosphere at background gas pressures in the range of 1–2 atm. Sulfurization was carried out in a mini reaction volume that provided a relatively S-limited environment. Reacted films were characterized using XRD, EDX, SEM, photoluminescence and Raman spectroscopy. It was found that, under the S-limited regime provided in these experiments the Cu-S secondary phase formation was most extreme in the sample grown at 1.5 atm, whereas films grown at lower and higher pressures showed much smaller degree of phase separation. Reaction at 2 atm yielded a compound film that was the closest to the initial precursor in terms of its composition. SEM micrographs showed rough morphology and polycrystalline structure that changed with the sulfurization pressure. The optical band gap of the films as determined by photoluminescence was found to be about 1.37 eV. These experiments demonstrated the importance of the sulfurization pressure as well as the size of the reactor internal volume in determining secondary phase formation in two-stage processed CZTS layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Effects of heavy alkali elements in Cu(In, Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. F. Solar, First Solar builds the highest efficiency thin film PV cell on record, 2014.
3. Growth of Cu2ZnSnS4 absorber layer on flexible metallic substrates for thin film solar cell applications10.1016/j.tsf.2015.06.028 ↗
4. Cu2ZnSnS4 thin films: facile and cost-effective preparation by RF-magnetron sputtering and texture control10.1016/j.jallcom.2012.11.082 ↗
5. Deposition of Cu2ZnSnS4 thin films by vacuum thermal evaporation from single quaternary compound source10.1016/j.matlet.2012.01.018 ↗
6. A review on pulsed laser deposited CZTS thin films for solar cell applications10.1016/j.jallcom.2014.09.018 ↗
7. Towards sustainable materials for solar energy conversion: preparation and photoelectrochemical characterization of Cu2ZnSnS410.1016/j.elecom.2008.02.008 ↗
8. Improved performance of Ge-alloyed CZTGeSSe thin-film solar cells through control of elemental losses10.1002/pip.2442 ↗
9. Compositional optimization of photovoltaic grade Cu2ZnSnS4 films grown by pneumatic spray pyrolysis10.1016/j.tsf.2012.12.082 ↗
10. Precursor stack ordering effects in Cu2ZnSnSe4 thin films prepared by rapid thermal processing10.1021/jp503699r ↗
11. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
12. Detailed balance limit of efficiency of P-N junction solar cells10.1063/1.1736034 ↗
13. Phase equilibria in the Cu2S–ZnS–SnS2 system10.1016/j.jallcom.2003.08.084 ↗
14. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
15. Effect of precursor stacking order and sulfurization temperature on compositional homogeneity of CZTS thin films10.1016/j.tsf.2016.07.058 ↗
16. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell applications10.1063/1.3587614 ↗
17. Influence of copper composition and reaction temperature on the properties of CZTSe thin films10.1016/j.jallcom.2016.04.309 ↗
18. Sulfurization time effects on the growth of Cu2ZnSnS4 thin films by solution method
19. Comparative study of the influence of two distinct sulfurization ramping rates on the properties of Cu2ZnSnS4 thin films10.1016/j.apsusc.2012.02.141 ↗
20. Influence of sulfurization pressure on Cu2ZnSnS4 thin films and solar cells prepared by sulfurization of metallic precursors10.1016/j.jpowsour.2014.09.088 ↗
21. Tin disulfide segregation on CZTS films sulfurized at high pressure10.1016/j.matlet.2015.11.090 ↗
22. Influence of sulfurization pressure on structural and electrical property of Cu2ZnSnS4 thin film and solar cell
23. The role of sulphur in the sulfurization of CZTS layer prepared by DC magnetron sputtering from a single quaternary ceramic target10.1016/j.ceramint.2018.03.225 ↗
24. Lide · 2005
25. Effect of heat treating metallic constituents on the properties of Cu2ZnSnSe4 thin films formed by a two-stage process10.1016/j.tsf.2017.01.037 ↗
26. Cu2ZnSnS4-based thin films and solar cells by rapid thermal annealing processing10.1016/j.tsf.2017.03.008 ↗
27. B.D. Cullity, Elements of X-ray Diffraction, 1978.
28. Scragg · 2010
29. The vapor pressure of indium, silver, gallium, copper, tin, and gold between 0.1 and 3.0 bar10.1007/BF00567103 ↗
30. Sublimation study of the tin sulphides SnS2, Sn2S3 and SnS10.1016/0925-8388(91)90053-X ↗
31. Characterization of vibrational and mechanical properties of quaternary compounds Cu2ZnSnS4 and Cu2ZnSnSe4 in kesterite and stannite structures10.1103/PhysRevB.84.205201 ↗
32. Sulfurization temperature effects on the growth of Cu2ZnSnS4 thin film10.1016/j.cap.2012.01.006 ↗
33. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol–gel route10.1039/C3TA13533K ↗
34. Earth-abundant non-toxic Cu2ZnSnS4 thin films by direct liquid coating from metal–thiourea precursor solution10.1016/j.solmat.2012.02.012 ↗
35. Investigation of properties the copper sulfide thin films prepared from different copper salts10.1016/j.ijleo.2018.05.031 ↗