journal article·2023-11

A synergistic polishing technology by mixed abrasives with photocatalysis and fenton reaction

Wang Jiang, Hai Zhou, Youming Yang, Shixiang Hu, Jian Song, Jian Ji, Jinde Song

Publisher page

Abstract

In this work, we propose a novel polishing method to improve the surface quality and polishing efficiency of GaN wafers. The proposed polishing technique was for use on GaN wafers using TiO 2/ZrO 2 soft and hard mixed abrasives combined with photocatalytic assistance and the Fenton reaction. The polishing effect obtained via this methodology was compared with that obtained using other methods; the effects of different parameters on the polishing of GaN were explored, including the illumination method, pH value of the polishing liquid, H 2O 2 concentration, and Fe 2+ concentration; the effects of different mechanical conditions on the polishing of GaN were also investigated, including the polishing pressure, polishing disk rotation speed, polishing liquid flow rate, and polishing time. The parameters describing the polishing technique developed here are optimized. It is found that both the mechanical and chemical processes have a significant impact on the material removal rate (MRR) and the surface roughness of the polished GaN. After optimizing the process parameters via orthogonal tests, the MRR of GaN is found to be 178.63 nm/h, and the surface roughness ( Ra ) is reduced to 0.244 nm. The combination of soft and hard mixed abrasives combined with photocatalytic assistance and the Fenton reaction is found to realize a high-efficiency and low-damage single-crystal polishing process for use on GaN.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Effects of additives on chemical mechanical polishing of electrically induced GaN wafers
2. Development status of semiconductor materials
3. Highly efficient and damage-free polishing of GaN (0001) by electrochemical etching-enhanced CMP process10.1016/j.apsusc.2020.145957 ↗
4. Current situation and trend of CMP technology for gallium nitride wafers
5. Research on surface processing technology of GaN single wafer
6. Effect of photocatalytic oxidation technology on GaN CMP10.1016/j.apsusc.2015.11.062 ↗
7. Research progress in packaging technology of gallium nitride power electronic devices
8. Continuous working 7.5 W high power GaN-based blue light laser (special invitation)
9. Development status of gallium nitride semiconductor materials
10. Hongxing Xie, Hongmin Lu, Liang Liu, et al. Overview of the Development of Gallium Nitride Solid State Power Amplifiers[J]. Electrocompon. Sci. Technol.:1–9. https://doi.org/10.16180/j.cnki.issn1007-7820.2023.08.010.
11. Research progress of polishing liquid in chemical mechanical polishing of gallium nitride
12. Wei · 2020
13. Development and application prospects of microwave power devices and their materials
14. Metal powder reinforced mechanically polished single crystal diamond
15. Research on step-by-step chemical polishing technology of mercury cadmium telluride thin films
16. Wei Cao, Zhaohui Deng, Chongyang Li, et al. Research progress of chemical mechanical polishing pads [J]. Surf. Technol.: 1-17. http://kns.cnki.net/kcms/detail/50.1083.tg.20211216.1855.012.html.
17. Kinematics characteristics of hydration polishing10.3901/JME.2015.11.201 ↗
18. Efficient and slurryless ultrasonic vibration assisted electrochemical mechanical polishing for 4H–SiC wafers10.1016/j.ceramint.2021.11.301 ↗
19. Baojun Yu, Zhuoyi Guo, Faxiang Lu, et al. Ultraviolet Photocatalytic Vibration Composite Polishing[J]. Infrared Laser Eng.: 1-8. http://kns.cnki.net/kcms/detail/12.1261.TN.20220512.1015.004.html.
20. Effects of quantities and pole-arrangements of magnets on the magneto-rheological polishing (MRP) performance of sapphire hemisphere
21. Research on chemical mechanical polishing technology and processing test of pulsed magnetic field-assisted magnetic composite abrasive grains
22. Research progress of new ultra-precision polishing technology and composite polishing technology for sapphire material processing
23. Effects of photocatalytic oxidation on electrochemical corrosion and chemical mechanical polishing of GaN materials
24. Niu · 2020
25. Huang · 2020
26. Influence of chemical reaction rate in UV photocatalytic assisted SiC polishing process
27. Wantang Wang, Baoguo Zhang, Jiakai Zhou, et al. Synergistic effect of long afterglow luminescent particles and photocatalysts in chemical mechanical polishing of SiC wafers [J]. Surf. Technol.: 1-19. http://kns.cnki.net/kcms/detail/50.1083.TG.20220426.1119.004.html.
28. Study on UV-TiO2-Fenton synergistic treatment of landfill leachate nanofiltration concentrate