journal article·2023-04Open access

Trace ppb-level NH3 sensor based on single petal-like Ce-doped SnO2

Yuting Yuan, Guanghui Zhan, Weizhong Peng, Chao Huang, Hande Chen, Shiwei Lin

Abstract

Gas sensors have been broadly researched for room temperature (RT) and real-time applications. However, it has been discovered that humidity affects the sensing and the sensor's lifespan at RT. Thus, we must develop new sensing materials with high sensitivity and stability at RT. During this research, the Ce–SnO 2 gas sensor was produced by the one-pot hydrothermal method . As fully confirmed by scanning electron microscopy, transmission electron microscopy , and X-ray photoelectron spectrometry , Ce doping changes the morphology of the original SnO 2 nanoarray and generated large oxygen vacancies . The sensor of Ce–SnO 2 -5(Ce wt% = 5 wt%) has a higher sensing performance for NH 3 at RT and high humidity (ΔR/R 0 = 33.62% at 30 ppb, 4.4 s/12.8s), and the limit of detection (LOD) reaches 780 ppt, which exceeds most of the recently reported similar metal oxides . Besides, the sensor also has an apparent anti-interference ability to some reduced gases and has better stability and repeatability. The sensing process improvement is explained as follows: the oxygen vacancy, large specific surface area, and redox cycling of Ce ions between the two valence states increase surface activity and charge transfer efficiency.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Ammonia sensors and their applications—a review10.1016/j.snb.2004.11.054 ↗
2. Ammonia exposure and hazard assessment for selected household cleaning product uses10.1038/sj.jea.7500431 ↗
3. Fabrication and properties of room temperature ammonia gas sensor based on SnO2 modified WSe2 nanosheets heterojunctions10.1016/j.apsusc.2022.153564 ↗
4. Au nanocomposite based chemiresistive ammonia sensor for health monitoring10.1021/acssensors.5b00013 ↗
5. Ultrafast in situ synthesis of large-area conductive metal-organic frameworks on substrates for flexible chemiresistive sensing10.1021/acsami.0c18422 ↗
6. A micelle fusion-aggregation assembly approach to mesoporous carbon materials with rich active sites for ultrasensitive ammonia sensing10.1021/jacs.6b07355 ↗
7. Highly sensitive graphene ammonia sensor enhanced by concentrated nitric acid treatment10.1016/j.apsusc.2022.152689 ↗
8. Highly sensitive room temperature ammonia gas sensor based on Ir-doped Pt porous ceramic electrodes10.1016/j.apsusc.2016.08.121 ↗
9. Low operating temperature and highly selective NH3 chemiresistive gas sensors based on Ag3PO4 semiconductor10.1016/j.apsusc.2019.02.184 ↗
10. Highly sensitive ammonia sensor with organic vertical nanojunctions for noninvasive detection of hepatic injury10.1021/ac303100k ↗
11. Polyaniline anchored MWCNTs on fabric for high performance wearable ammonia sensor10.1021/acssensors.8b00589 ↗
12. Ultrasensitive flexible NH3 gas sensor based on polyaniline/SrGe4O9 nanocomposite with ppt-level detection ability at room temperature10.1016/j.snb.2020.128293 ↗
13. Room-temperature chemiresistive gas sensing of SnO2 nanowires: a review10.1007/s10904-021-02198-5 ↗
14. Room temperature flexible NH3 sensor based on polyaniline coated Rh-doped SnO2 hollow nanotubes10.1016/j.snb.2020.129313 ↗
15. Highly sensitive NH3 gas sensors based on novel polypyrrole-coated SnO2 nanosheet nanocomposites10.1016/j.snb.2015.10.078 ↗
16. Resistive-type VOCs and pollution gases sensor based on SnO2: a review10.1016/j.mssp.2021.106246 ↗
17. TiO2/SnO2 and TiO2/CuO thin film nano-heterostructures as gas sensors10.1016/j.apsusc.2019.02.139 ↗
18. Hydrothermal synthesis of hierarchical SnO2 nanostructures made of superfine nanorods for smart gas sensor10.1016/j.apsusc.2015.12.172 ↗
19. Raspberry-like SnO2 hollow nanostructure as a high response sensing material of gas sensor toward n-butanol gas10.1016/j.jpcs.2018.04.032 ↗
20. Catalyst-free highly sensitive SnO2 nanosheet gas sensors for parts per billion-level detection of acetone10.1021/acsami.0c15273 ↗
21. Humidity-independent oxide semiconductor chemiresistors using terbium-doped SnO2 yolk-shell spheres for real-time breath analysis10.1021/acsami.8b04245 ↗
22. Enhanced NH3 and H2 gas sensing with H2S gas interference using multilayer SnO2/Pt/WO3 nanofilms10.1016/j.jhazmat.2021.125181 ↗
23. Micromachined NH3 gas sensor with ppb-level sensitivity based on WO3 nanoparticles thinfilm10.1016/j.proeng.2011.12.283 ↗
24. Hydrothermal self-assembly of novel porous flower-like SnO2 architecture and its application in ethanol sensor10.1016/j.apsusc.2015.08.014 ↗
25. Ultrafast NH3 gas sensor based on phthalocyanine-optimized non-covalent hybrid of carbon nanotubes with pyrrole10.1016/j.snb.2021.131352 ↗
26. Low-operating-temperature NO2 sensor based on a CeO2/ZnO heterojunction10.3390/s21248269 ↗
27. Precise preparation of WO3@SnO2 core shell nanosheets for efficient NH3 gas sensing10.1016/j.jcis.2020.02.042 ↗
28. Room temperature gas sensors based on Ce doped TiO2 nanocrystals for highly sensitive NH3 detection10.1016/j.cej.2022.136449 ↗
29. Improved visible-light-driven photocatalytic activity of CeO2 microspheres obtained by using lotus flower pollen as biotemplate10.1016/j.mssp.2013.09.020 ↗
30. Role of oxygen vacancies in nanostructured metal-oxide gas sensors: a review10.1016/j.snb.2019.126845 ↗
31. Ionic-activated chemiresistive gas sensors for room-temperature operation
32. Performance analysis, modeling, and development of a signal conditioning unit of n-type metal oxide gas sensor for acetone gas detection10.1007/s10825-021-01739-y ↗
33. Enhanced NH3 gas sensing performance based on electrospun alkaline-earth metals composited SnO2 nanofibers10.1016/j.jallcom.2014.08.153 ↗
34. Band-gap-tunable CeO2 nanoparticles for room-temperature NH3 gas sensors10.1016/j.ceramint.2020.04.261 ↗
35. Reduced graphene oxide-CuFe2O4 nanocomposite: a highly sensitive room temperature NH3 gas sensor10.1016/j.snb.2018.05.093 ↗
36. A highly sensitive room-temperature sensing material for NH3: SnO2-nanorods coupled by rGO10.1016/j.snb.2016.09.096 ↗
37. Efficient, fast response, and low cost sensor for NH3 gas molecules based on SnO2: CuO/macroPSi nanocomposites10.1007/s00339-020-04106-z ↗
38. NH3 gas sensor based on Pd/SnO2/RGO ternary composite operated at room-temperature10.1016/j.snb.2015.09.091 ↗
39. SnO2/SnS2 nanotubes for flexible room-temperature NH3 gas sensors10.1039/C7RA10537A ↗
40. Enhanced ammonia response of Ti3C2Tx nanosheets supported by TiO2 nanoparticles at room temperature10.1016/j.snb.2019.126874 ↗
41. Design and preparation of hollow NiO sphere- polyaniline composite for NH3 gas sensing at room temperature10.1016/j.snb.2021.130179 ↗
42. Room-temperature high-performance ammonia gas sensing based on rGO nanosheets/MoO3 nanoribbons nanocomposites film10.1016/j.flatc.2021.100333 ↗
43. Zinc oxide nanostructures for NO2 gas-sensor applications: a review10.1007/s40820-014-0023-3 ↗
44. Room-temperature high-performance H2S sensor based on porous CuO nanosheets prepared by hydrothermal method10.1021/acsami.6b02893 ↗
45. Room temperature ammonia sensors based on zinc oxide and functionalized graphite and multi-walled carbon nanotubes10.1016/j.snb.2010.11.057 ↗
46. Highly sensitive and ultra-fast gas sensor based on CeO2-loaded In2O3 hollow spheres for ppb-level hydrogen detection10.1016/j.snb.2017.10.139 ↗
47. A novel CeO2 Hollow-Shell sensor constructed for high sensitivity of acetone gas detection10.1016/j.apsusc.2021.151337 ↗
48. Study of Ag promoted Fe2O3@CeO2 as superior soot oxidation catalysts: the role of Fe2O3 crystal plane and tandem oxygen delivery10.1016/j.apcatb.2018.05.093 ↗
49. Gas sensing enhancing mechanism via doping-induced oxygen vacancies for gas sensors based on indium tin oxide nanotubes10.1016/j.snb.2018.03.008 ↗