Synergistic effect of aminosilane and K2CO3 on improving Chemical Mechanical Polishing performance of SiO2 dielectric layer
Source abstract
Abstract
Chemical Mechanical Polishing (CMP) is a widely used surface treatment process in integrated circuit manufacturing for global planarization of the surface layers of various materials. The CMP slurry is regarded as one of the key determinants of planarization performance, considering the synergistic effect of its abrasive and other chemical components. As the component size is decreased to the molecular or even atomic scale, ways to achieve a high material removal rate of the SiO 2 dielectric layer while maintaining high surface topography quality have become a challenge for the integrated circuit manufacturing industry. In this work, the synergistic effect of aminosilane and K 2CO 3 in the SiO 2 CMP process was identified. A material removal rate of 248 nm/min and surface roughness of 0.374 nm was achieved under a pH of 11, SiO 2 abrasive of 12 wt%, K 2CO 3 concentration of 0.12 M, and 3-aminopropyltriethoxysilane (APTES) concentration of 60 ppm. Through X-ray photoelectron spectroscopy (XPS), it was found that APTES can be adsorbed on the surface of SiO 2 film through chemical bonding. Further, it was proved by fourier infrared spectroscopy (FTIR) that APTES could be combined with abrasive particles and coated on the surface of abrasive to realize the modification. The changes in particle size and zeta potential of the slurry were measured with a laser particle size analyzer. The studies suggested that under the influence of K 2CO 3 , the hydration reaction on the SiO 2 surface was intensified, the chemical bonding between APTES and the silanol (Si–OH) dangling bond on both surface of abrasive and SiO 2 film was established, which enhanced the chemical reaction on the wafer surface. Finally, a material removal model of SiO 2, characterized by the synergistic effect of APTES and K 2CO 3 was proposed based on the study.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Multigate transistors as the future of classical metal–oxide–semiconductor field-effect transistors10.1038/nature10676 ↗
2. Flash memory cells-an overview10.1109/5.622505 ↗
3. Chemical-mechanical polishing: enhancing the manufacturability of MEMS, micromachining and microfabrication process technology II
4. Chemical treatment of low-k dielectric surfaces for patterning of thin solid films in microelectronic applications10.1021/acsami.6b00495 ↗
5. Zeta potential-tunable silica abrasives and fluorinated surfactants in chemical mechanical polishing slurries
6. Chemical effect on the material removal rate in the CMP of silicon wafers10.1016/j.wear.2010.11.006 ↗
7. Preparation of spherical ceria coated silica nanoparticle abrasives for CMP application10.1016/j.apsusc.2015.09.149 ↗
8. Roughness effect on uniformity and reliability of sequential lateral solidified low-temperature polycrystalline silicon thin-film transistor10.1149/1.2209430 ↗
9. The influence of abrasive particle size in copper chemical mechanical planarization10.1016/j.surfcoat.2012.04.004 ↗
10. Slurry components in metal chemical mechanical planarization (CMP) process: a review10.1007/s12541-016-0201-y ↗
11. Influence of slurry components on copper CMP performance in alkaline slurry10.1016/j.mee.2017.10.002 ↗
12. Improvement of TEOS-chemical mechanical polishing performance by control of slurry temperature10.1016/j.mee.2005.08.011 ↗
13. Effect of particle size of chemical mechanical polishing slurries for enhanced polishing with minimal defects10.1149/1.1393931 ↗
14. Improvement in chemical mechanical polishing of 4H-SiC wafer by activating persulfate through the synergistic effect of UV and TiO210.1016/j.jmatprotec.2021.117150 ↗
15. Chemical processes in glass polishing10.1016/0022-3093(90)90200-6 ↗
16. Effects of large particles on MRR, WIWNU and surface quality in TEOS chemical mechanical polishing based on FA/O alkaline slurry10.1149/2.0101811jss ↗
17. Influence of K+ ions on the interaction of water with silicon dioxide at low temperature relevant to CMP10.1149/1.1806823 ↗
18. Effect of potassium tartrate on removal rate selectivity of Co/TiN/TEOS for cobalt "buff step" chemical mechanical planarization10.1149/2162-8777/ab8d92 ↗
19. Ionic enhancement of silica surface nanowear in electrolyte solutions10.1021/la303223q ↗
20. Tailoring silica nanotribology for CMP slurry optimization: Ca2+ cation competition in C12TAB mediated lubrication10.1021/am100070e ↗
21. Effect of slurry ionic salts at dielectric silica CMP10.1149/1.1644609 ↗
22. Ammonium-salt-added silica slurry for the chemical mechanical polishing of the interlayer dielectric film planarization in ULSI's, Jpn10.1143/JJAP.34.1037 ↗
23. Barrier metal slurry for low defect copper damascene chemical mechanical polishing10.1149/06440.0085ecst ↗
24. Influence of CMP slurries and post-CMP cleaning solutions on Cu interconnects and TDDB reliability10.1149/1.2908820 ↗
25. Molecular dynamics study on ultra-confined NaCl solution in the silane coupling agent modified rubber calcium silicate hydrate nano-pore10.1016/j.conbuildmat.2020.121418 ↗
26. Self-assembling silicon carbide@Kh550 onto carbon fiber for tribological applications10.1016/j.ceramint.2020.06.108 ↗
27. Recent progress in conjugated microporous polymers for clean energy: synthesis, modification, computer simulations, and applications10.1016/j.progpolymsci.2021.101374 ↗
28. Novel phosphate-functionalized silica-based dispersions for selectively polishing silicon nitride over silicon dioxide and polysilicon films10.1016/j.jcis.2010.04.034 ↗
29. Preparation of silane modified SiO2 abrasive particles and their Chemical Mechanical Polishing (CMP) performances10.1016/j.wear.2011.05.044 ↗
30. Zeta potential-tunable silica abrasives and fluorinated surfactants in chemical mechanical polishing slurries
31. Effect of modified silica abrasive particles on nanosized particle deposition in final polishing of silicon wafers10.1080/10402004.2013.867467 ↗
32. Trace metals optimization in ceria abrasive for material removal rate enhancement during ILD CMP10.1149/2.0241709jss ↗
33. Study on the weakly alkaline slurry of copper chemical mechanical planarization for GLSI10.1149/2.0071708jss ↗
34. Chemical mechanical planarization of barrier layers by using a weakly alkaline slurry10.1016/j.mee.2013.04.001 ↗
35. Improvement of barrier CMP performance with alkaline slurry: role of ionic strength10.1149/2.0111809jss ↗
36. The effect of H2O2 and 2-MT on the chemical mechanical polishing of cobalt adhesion layer in acid slurry10.1149/2.017204esl ↗
37. Investigation of abrasive-free slurry for polysilicon buffing chemical mechanical planarization10.1016/j.mssp.2021.105755 ↗
38. A method to derivatize surface silanol groups to Si-alkyl groups in carbon-doped silicon oxides10.1039/C6RA20355H ↗
39. High-removal selectivity through interaction between polyacrylamide and SiO2 film in poly isolation chemical mechanical planarization10.1166/jnn.2009.NS67 ↗
40. Effects of different amounts of APTES on physicochemical and structural properties of amino-functionalized MCM-41-MSNs10.1007/s10971-016-4163-4 ↗
41. XPS and AFM characterization of aminosilanes with different numbers of bonding sites on a silicon wafer10.1002/sia.5311 ↗
42. Adsorption characteristics of sulfur-functionalized silica microspheres with respect to the removal of Hg(II) from aqueous solutions10.1021/ie402824r ↗
43. Highly efficient removal of sapphire by composite nanoabrasive with novel inorganic polyelectrolyte as a binder10.1016/j.jallcom.2018.11.416 ↗
44. Amino-terminated SiO2 aerogel towards highly-effective lead (II) adsorbent via the ambient drying process10.1016/j.jnoncrysol.2016.04.007 ↗
45. Preparation of crosslinked polysiloxane/SiO2 nanocomposite via in-situ condensation and its surface modification on cotton fabrics10.1016/j.apsusc.2016.02.204 ↗
46. Synthesis of Ag-SiO2-APTES nanocomposites by blending poly(vinylidene fluoride) membrane with potential applications on dye wastewater treatment10.1142/S1793292018500340 ↗
47. Physical and optical properties of organo-modified silica nanoparticles prepared by sol–gel10.1007/s10971-011-2464-1 ↗