journal article·2022-06

Comparison of catalytic and fuel additive properties of bimetallic nanoparticles and its composite: FeMnO3 and PANI-FeMnO3

Qurat UlAin, Sarmed Ali, Saba Jamil, Shamsa Bibi, Shanza Rauf Khan, Shafiq UrRehman, Guria Bibi, Tahreem Khan, Hamza Shehroz, Muhammad Hashaam, Muhammad Ramzan Saeed Ashraf Janjua

Publisher page

Abstract

A novel nanocomposite polyaniline-iron manganese oxide (PANI-FeMnO 3 ) is successfully synthesized via in-situ chemical oxidative polymerization of aniline using ammonium persulfate (APS) as an oxidizing agent and FeMnO 3 bimetallic nanoparticles. FeMnO 3 bimetallic nanoparticles are prepared by a temperature-controlled solvothermal method to obtain desired morphology. The morphology of synthesized products is confirmed by SEM and STEM analysis. XRD analysis provided that bimetallic nanoparticles are highly crystalline however, nanocomposites have amorphous nature due to the presence of polymer. FTIR patterns of PANI and PANI-FeMnO 3 nanocomposite have characteristic peaks at 1543 cm -1 , indicating the electron delocalization in the conductive emeraldine form of PANI. Catalytic efficiency of the FeMnO 3 bimetallic nanoparticles and PANI-FeMnO 3 nanocomposites as catalysts in organic dyes and nitroarenes reduction is studied. Different parameters such as k app, reduction time, percentage reduction and reduced concentration are performed to assess the catalytic activity of both catalysts. Among all substrates, highest k app value is 0.186 min -1 for 2,4-DNP with PANI-FeMnO 3 nanocomposite. Effect of type and orientation of functional groups, nature of bonds and steric hindrance on the reduction rate of substrates is also studied. The efficiency of FeMnO 3 bimetallic nanoparticles and PANI-FeMnO 3 nanocomposite as nano additives is also evaluated and compared by investigating the physical and combustion parameters of commercial diesel. Fuel efficiency is observed to be greatly enhanced by increasing the dosage of nano additives. The results indicate that the efficiency of PANI-FeMnO 3 nanocomposite is greater than that FeMnO 3 bimetallic nanoparticles.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Nanomaterials for catalytic reactions · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Preparation of magnetic-conductive Mn0.6Zn0.4Fe2O4-CNTs/PANI nanocomposites through hydrothermal synthesis coupled with in situ polymerization10.1016/j.compscitech.2014.05.023 ↗
2. Synthesis and characterization of polyaniline–Fe3O4 nanocomposite: electrical conductivity, magnetic, electrochemical studies10.1016/j.synthmet.2010.06.015 ↗
3. Polyaniline/Fe3O4 nanoparticle composite: synthesis and reaction mechanism10.1021/jp811125k ↗
4. Polyaniline: synthesis, properties, and application
5. Polyaniline-based nanocomposites for direct methanol fuel cells (DMFCs)-A Recent Review10.1016/j.jiec.2021.02.008 ↗
6. Photocatalytic activity and NIR laser response of polyaniline conjugated graphene nanocomposite prepared by a novel acid-less method10.1016/j.apcatb.2016.01.009 ↗
7. PtFe nanoparticles supported on electroactive Au–PANI core@ shell nanoparticles for high performance bifunctional electrocatalysis10.1039/C7TA02660A ↗
8. Nayak · 2019 · 55
9. Synthesis and characterization of polyaniline/nickel oxide composites for fuel additive and dyes reduction10.1016/j.cplett.2021.138713 ↗
10. Lanthanum/Cadmium/Polyaniline bimetallic nanocomposite for the photodegradation of organic pollutant10.1007/s13726-015-0388-2 ↗
11. Synthesis of mesoporous Fe-Mn bimetal oxide nanocomposite by aeration co-precipitation method: physicochemical, structural, and optical properties10.1016/j.matchemphys.2018.11.067 ↗
12. Evaluation of iron-and manganese-based mono-and mixed-metallic oxygen carriers for chemical looping combustion10.1016/j.fuel.2014.07.068 ↗
13. Urea combustion synthesis of nano-structure bimetallic perovskite FeMnO and mixed monometallic iron manganese oxides: effects of preparation parameters on structural, opto-electronic and photocatalytic activity for photo-degradation of Basic Blue 1210.1007/s10854-017-6568-4 ↗
14. Dispersed conducting polymer nanocomposites with glucose oxidase and gold nanoparticles for the design of enzymatic glucose biosensors10.3390/polym13132173 ↗
15. Formation and electrochemical characterisation of enzyme-assisted formation of polypyrrole and polyaniline nanocomposites with embedded glucose oxidase and gold nanoparticles10.1149/1945-7111/abc9dc ↗
16. Hydrous CeO2-Fe3O4 decorated polyaniline fibers nanocomposite for effective defluoridation of drinking water10.1016/j.jcis.2018.07.134 ↗
17. Recent progresses in graphene-based (photo) catalysts for reduction of nitro compounds
18. Magnetite/reduced graphene oxide nanocomposites: one step solvothermal synthesis and use as a novel platform for removal of dye pollutants10.1007/s12274-011-0111-3 ↗
19. Enhanced dual catalytic activities of silver-polyaniline/titanium dioxide magnetic nanocomposite10.1016/j.jphotochem.2020.112423 ↗
20. Exploring the coordination confinement effect of divalent palladium/zero palladium doped polyaniline-networking: as an excellent-performance nanocomposite catalyst for CC coupling reactions10.1016/j.jcat.2020.02.021 ↗
21. Preparation of polyaniline microtubes as the gold catalyst support with improved catalytic performances for the reduction of nitrophenols10.1007/s11244-020-01385-x ↗
22. Nickel hydroxide nanoparticles decorated napthalene sulfonic acid-doped polyaniline nanotubes as efficient catalysts for nitroarene reduction10.1016/j.jcis.2020.08.111 ↗
23. Structural characterization, synthesis and application of zincite nanoparticles as fuel additive
24. Layer by layer assembly of zinc oxide nanotubes and nanoflowers as catalyst for separate and simultaneous catalytic degradation of dyes and fuel additive10.1002/slct.201900645 ↗
25. Synthesis and characterization of Mg–Zn bimetallic nanoparticles: selective hydrogenation of p-nitrophenol, degradation of reactive carbon black 5 and fuel additive10.1007/s10904-019-01202-3 ↗
26. 8. The crystal structure of bixbyite and the c-modification of the sesquioxides10.1515/zkri-1930-0109 ↗
27. The structure of two manganese hexacyanometallates (II): Mn2[Fe(CN)6].8H2O and Mn2[Os(CN)6] 8H2O10.1154/1.1469023 ↗
28. pTSA doped conducting graphene/polyaniline nanocomposite fibers: thermoelectric behavior and electrode analysis10.1016/j.cej.2013.12.033 ↗
29. CuO decorated polyaniline nanocomposite-based sensor for the electrochemical determination of an opioid analgesic10.1007/s11581-021-04333-1 ↗
30. Fabrication and characterization of polyaniline, polyaniline/MgO(30%) and polyaniline/MgO(40%) nanocomposites for their employment in LPG sensing at room temperature10.1007/s10854-019-00737-y ↗
31. SrTiO3 nanocube-doped polyaniline nanocomposites with enhanced photocatalytic degradation of methylene blue under visible light10.3390/polym8020027 ↗
32. Preparation and characterization of polyaniline/multi-walled carbon nanotube composites10.1016/j.carbon.2004.10.043 ↗
33. Polyaniline nanofiber gas sensors: examination of response mechanisms10.1021/nl035122e ↗
34. Fe–Mn bimetallic oxides-catalyzed oxygen reduction reaction in alkaline direct methanol fuel cells10.1039/C7RA12610G ↗
35. Optical and electrical studies of polyaniline/ZnO nanocomposite10.1155/2013/157810 ↗
36. MnO2/Cr2O3/PANI nanocomposites prepared by in situ oxidation polymerization method: optical and electrical behaviors10.1002/app.47219 ↗
37. Nano-flowered manganese doped ferrite@ PANI composite as energy storage electrode material for supercapacitors10.1016/j.jelechem.2020.114491 ↗
38. Removal of Congo red dye from aqueous medium by its catalytic reduction using sodium borohydride in the presence of various inorganic nano-catalysts: a review10.1016/j.jclepro.2018.03.209 ↗
39. Performance evaluation of a continuous flow immobilized rotating tube photocatalytic reactor (IRTPR) immobilized with TiO2 catalyst for azo dye degradation10.1016/j.cej.2008.01.014 ↗
40. Sonocatalytic rapid degradation of Congo red dye from aqueous solution using magnetic Fe0/polyaniline nanofibers10.1016/j.ultsonch.2017.02.022 ↗
41. Investigation on ecological parameters and COD minimization of textile effluent generated after dyeing with mono and bi-functional reactive dyes10.1016/j.eti.2018.06.003 ↗
42. Highly efficient catalytic reductive degradation of various organic dyes by Au/CeO2-TiO2 nano-hybrid10.1007/s12039-016-1203-0 ↗
43. Template free synthesis of calcium-tin (CaSn3) bimetallic micro cubes: characterization, catalytic activity, adsorption and additive properties10.1016/j.cplett.2019.136917 ↗
44. Synthesis of manganese-tin oxide microparticles by solvothermal method and study of application as catalyst and additive10.1080/09593330.2019.1660414 ↗
45. Platinum−copper bimetallic nanoparticles supported on TiO2 as catalysts for photo−thermal catalytic toluene combustion
46. Ultrafine and well-dispersed Pd-Ni bimetallic catalyst stabilized by dendrimer-grafted magnetic graphene oxide for selective reduction of toxic nitroarenes under mild conditions10.1016/j.jhazmat.2021.127717 ↗
47. Engineering of cobalt sulfide (Co5S2) microcubes for selective catalytic hydrogenation of nitroarenes and enhanced calorific value of fuel10.1016/j.cplett.2020.137649 ↗
48. Graphene-TiO2-polyaniline nanocomposite: a new green and efficient catalyst as a alternative for noble metal and NaBH4 induced the reduction of 4-nitro phenol10.1016/j.flatc.2020.100179 ↗
49. Role of polymer structures in catalysis by transition metal and metal oxide nanoparticle composites10.1021/acs.chemrev.9b00137 ↗
50. Engineering of cobalt sulfide (Co5S2) microcubes for selective catalytic hydrogenation of nitroarenes and enhanced calorific value of fuel10.1016/j.cplett.2020.137649 ↗
51. Facile synthesis of graphene oxide–silver nanocomposite for decontamination of water from multiple pollutants by adsorption, catalysis and antibacterial activity10.1016/j.jenvman.2018.09.061 ↗
52. Morphologically controlled synthesis of cubes like tin oxide nanoparticles and study of its application as photocatalyst for Congo red degradation and as fuel additive10.1007/s10904-017-0687-5 ↗
53. Comparative study of nanoparticles and alcoholic fuel additives-biodiesel-diesel blend for performance and emission improvements10.1016/j.fuel.2020.118434 ↗
54. Hydrothermally engineered Ni–CuC hybrid nanocomposites: structural and morphological investigations with potential fuel catalytic applications10.1016/j.matchemphys.2021.124837 ↗
55. Hydrothermally engineered Ni–CuC hybrid nanocomposites: structural and morphological investigations with potential fuel catalytic applications10.1016/j.matchemphys.2021.124837 ↗
56. Performance and emission characteristics of a CI engine using graphene oxide (GO) nano-particles additives in biodiesel-diesel blends10.1016/j.renene.2019.06.006 ↗
57. Nanoparticles as fuel additive for improving performance and reducing exhaust emissions of internal combustion engines