journal article·2021-11

Role of electron carrier selective contact layer of lithium fluoride films with wide bandgap and low work function for silicon heterojunction solar cells

Muhammad Quddamah Khokhar, Shahzada Qamar Hussain, Duy Phong Pham, Meshal Alzaid, Aamir Razaq, Ishrat Sultana, Youngkuk Kim, Young Hyun Cho, Eun-Chel Cho, Junsin Yi

Publisher page

Abstract

Abstract Wide bandgap with low work function-based materials are widely used as an electron transport layer to achieve high efficiency in silicon heterojunction (SHJ) solar cells. We presented transparent Lithium fluoride (LiFx) films with a wide optical bandgap and various thicknesses for the applications of SHJ solar cells. The high-resolution transmission electron microscopic (HR-TEM) analysis was used to confirm the thickness of LiFx layers. The aluminium electrode's work-function was reduced because of the high dipole moment by the LiFx and lowers an energy barrier at back contact. Enhancement of quantum efficiency (QE) at longer wavelength regions and operating voltage was due to lower energy barrier height can improve the short-circuit current density (Jsc), open-circuit voltage (Voc), and hence solar cell efficiency. Thermally evaporated-based LiFx films showed an optical transmittance of 88 ~ 90% in the visible-NIR (380–1100) nm wavelength region. LiFx/a-Si:H(i)/c-Si/a-Si:H(i)/LiFx structure for 20 nm thick LiFx showed lifetime of 1129.73 μs and implied iVoc of 731.7 mV. SHJ solar cells were fabricated using various thicknesses 1, 10 and 20 nm, respectively. The SHJ solar cells fabricated on 20 nm thick LiFx film yield the maximum efficiency of 17.16% and was used for the baseline condition of simulations. The simulated performance of the SHJ solar cell was improved from 0.098 to 22.58% as a function of variable LiFx work function from 3.2 to 3.9 eV.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Electronic structure of 8-hydroxyquinoline aluminum/LiF/Al interface for organic electroluminescent device studied by ultraviolet photoelectron spectroscopy10.1063/1.122583 ↗
2. Role of the work function of transparent conductive oxide on the performance of amorphous/crystalline silicon heterojunction solar cells studied by computer simulation10.1002/pssa.200723276 ↗
3. Charge transfer and dipole moments of polyatomic systems10.1063/1.473772 ↗
4. Maye · 2011
5. Work function changes induced by deposition of ultrathin dielectric films on metals: a theoretical analysis10.1103/PhysRevB.78.235423 ↗
6. Reduced initial degradation of bulk heterojunction organic solar cells by incorporation of stacked fullerene and lithium fluoride interlayers10.1063/1.3297876 ↗
7. Evaluating carrier accumulation in degraded bulk heterojunction organic solar cells by a thermally stimulated current technique10.1002/adfm.200901573 ↗
8. Substitutional doping of amorphous silicon10.1016/0038-1098(75)90284-7 ↗
9. Schottky solar cells based on colloidal nanocrystal films10.1021/nl802476m ↗
10. Recent developments in amorphous silicon solar cells10.1016/0165-1633(80)90002-7 ↗
11. Extraction of carriers photogenerated at p type amorphous SiC window layer in amorphous Si solar cells10.1063/1.3491164 ↗
12. Silicon oxide based n-doped layer for improved performance of thin film silicon solar cells10.1063/1.3463457 ↗
13. Schottky barrier heights and the continuum of gap states10.1103/PhysRevLett.52.465 ↗
14. Unified disorder induced gap state model for insulator–semiconductor and metal–semiconductor interfaces10.1116/1.583556 ↗
15. Amorphous Si rear Schottky junction solar cell with a LiF/Al back electrode10.1109/TED.2011.2160267 ↗
16. Morphological, electrical and optical properties of organic light-emitting diodes with a LiF/Al cathode and an Al-hydroxyquinoline/diamine junction10.1016/j.synthmet.2003.11.008 ↗
17. Application of an ultrathin LiF/Al bilayer in organic surface-emitting diodes10.1063/1.1327273 ↗
18. Experimental study of a chemical reaction between LiF and Al10.1063/1.1576893 ↗
19. Electronic structure of Alq3/LiF/Al interfaces studied by UV photoemission10.1016/S0379-6779(98)01425-8 ↗
20. Charge injection spectroscopy of Alq3 thin films deposited on bare and LiF-modified metal substrates10.1016/j.mee.2005.03.011 ↗
21. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
22. Photocurrent increase in amorphous Si solar cells by increased reflectivity of LiF/Al electrodes10.1016/j.solmat.2012.06.044 ↗
23. Effects of LiF/Al back electrode on the amorphous/crystalline silicon heterojunction solar cells10.1016/j.mseb.2012.10.029 ↗
24. Simulation of silicon heterojunction solar cells for high efficiency with lithium fluoride electron carrier selective layer10.3390/en13071635 ↗
25. Influence of high work function ITO:Zr films for the barrier height modification in a-Si:H/c-Si heterojunction solar cells10.1016/j.solmat.2013.11.031 ↗
26. Ambient annealing influence on surface passivation and stoichiometric analysis of molybdenum oxide layer for carrier selective contact solar cells10.1016/j.mssp.2018.11.028 ↗
27. Effect of valence band offset and surface passivation quality in the silicon heterojunction solar cells10.1149/2.031111jes ↗
28. Role of double ITO/In2O3 layer for high efficiency amorphous/crystalline silicon heterojunction solar cells10.1016/j.materresbull.2014.05.003 ↗
29. Investigation of electrical and optical properties of highly transparent TCO/Ag/TCO multilaye10.1166/jnn.2015.10247 ↗
30. Molybdenum oxide: a superior hole extraction layer for replacing p-type hydrogenated amorphous silicon with high efficiency heterojunction Si solar cells10.1016/j.materresbull.2018.10.018 ↗
31. Molybdenum oxide: a superior hole extraction layer for replacing p-type hydrogenated amorphous silicon with high efficiency heterojunction Si solar cells10.1016/j.materresbull.2018.10.018 ↗
32. Simulation and study of the influence of the buffer intrinsic layer, back-surface field, densities of interface defects, resistivity of p-type silicon substrate and transparent conductive oxide on heterojunction with intrinsic thin-layer (HIT) solar cell10.1016/j.solener.2010.01.029 ↗
33. Interface-dependent efficiency tradeoff in Si-based carrier-selective solar cells10.1109/TED.2018.2822938 ↗
34. Magnesium fluoride electron-selective contacts for crystalline silicon solar cells10.1021/acsami.6b03599 ↗
35. One-pot preparation of SBP-PANI-PAA-ethylene glycol diglycidyl ether sensor for electrochemical detection of H2O210.1016/j.snb.2016.08.110 ↗
36. Lithography-free and dopant-free back-contact silicon heterojunction solar cells with solution-processed TiO2 as the efficient electron selective layer10.1016/j.solmat.2019.110196 ↗
37. ITO: Zr bi-layers deposited by reactive O2 and Ar plasma with high work function for silicon heterojunction solar cells10.1016/j.cap.2020.06.006 ↗