Investigation of abrasive-free slurry for polysilicon buffing chemical mechanical planarization
Source abstract
Abstract
Abstract Abrasive-free slurries which control polysilicon removal and surface roughness are highly desirable for polysilicon buffing chemical mechanical planarization (CMP). Here, we show that the addition of poly(ethylene glycol) (PEG) to poly(diallyldimethylammonium chloride) (PDADMAC) solutions inhibits adsorption of PDADMAC on polysilicon films. The effects of PEG additive on polysilicon static etching and removal behavior during CMP were investigated as a function of PEG concentration. Polysilicon static etching and removal amounts were suppressed with an increase in PEG concentration, and surface roughness was improved by 19.2% and 55.3% compared to those obtained with 250 ppm PDADMAC and 1 wt% silica slurry, respectively, within a certain range of PEG concentrations. The adsorption mechanism of PEG on polysilicon films was investigated using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, contact angle measurements, X-ray photoelectron spectroscopy (XPS) and zeta potential measurements. Our results suggest that PEG adsorbs on the surface of polysilicon films and forms a passivation layer that interferes with the approach of PDADMAC. A possible mechanism for improvement in surface roughness was also proposed based on the inhibition effect of PEG during the CMP process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Colinge · 2008
2. Multigate transistors as the future of classical metal–oxide–semiconductor field-effect transistors10.1038/nature10676 ↗
3. Flash memory cells-an overview10.1109/5.622505 ↗
4. Chemical-mechanical polishing: enhancing the manufacturability of MEMS, micromachining and microfabrication process technology II
5. Changes in the structure properties and CMP manufacturability of a poly-Si film induced by deposition and annealing processes10.1016/j.jmatprotec.2016.03.015 ↗
6. Capillary waves in pulsed excimer laser crystallized amorphous silicon10.1063/1.115610 ↗
7. Roughness effect on uniformity and reliability of sequential lateral solidified low-temperature polycrystalline silicon thin-film transistor10.1149/1.2209430 ↗
8. Surface engineering of polycrystalline silicon for long-term mechanical stress endurance enhancement in flexible low-temperature poly-Si thin-film transistors10.1021/acsami.6b14525 ↗
9. Reliability and memory characteristics of sequential laterally solidified low temperature polycrystalline silicon thin film transistors with an oxide–nitride–oxide stack gate dielectric10.1143/JJAP.45.3154 ↗
10. A water polishing process to improve ceria abrasive removal10.1149/2.0171908jss ↗
11. Communication—effect of hydrogen water on ceria abrasive removal in post-CMP cleaning10.1149/2162-8777/ab902c ↗
12. Case study for particle agglomeration during chemical mechanical polishing process
13. Effect of particle size of chemical mechanical polishing slurries for enhanced polishing with minimal defects10.1149/1.1393931 ↗
14. Particle adhesion and removal mechanisms in post-CMP cleaning processes10.1109/TSM.2002.804872 ↗
15. Study of the cross contamination effect on post CMP in situ cleaning process10.1016/j.mee.2015.03.033 ↗
16. Review on copper chemical–mechanical polishing (CMP) and post-CMP cleaning in ultra large system integrated (ULSI)—an electrochemical perspective10.1016/j.electacta.2006.07.039 ↗
17. Approaches to defect characterization, mitigation, and reduction10.1016/B978-0-08-100165-3.00017-6 ↗
18. Abrasive-free and ultra-low abrasive chemical mechanical polishing (CMP) processes10.1016/B978-0-08-100165-3.00009-7 ↗
19. Novel α-amine-functionalized silica-based dispersions for selectively polishing polysilicon and Si (1 0 0) over silicon dioxide, silicon nitride or copper during chemical mechanical polishing10.1016/j.colsurfa.2010.09.019 ↗
20. Role of poly (diallyldimethylammonium chloride) in selective polishing of polysilicon over silicon dioxide and silicon nitride films10.1021/la104257k ↗
21. Reactive liquids for non–prestonian chemical mechanical polishing of polysilicon films10.1149/2.0081905jss ↗
22. One-pot green synthesis of water-soluble carbon nanodots with multicolor photoluminescence from polyethylene glycol
23. Charge density and pH effects on polycation adsorption on poly-Si, SiO2, and Si3N4 films and impact on removal during chemical mechanical polishing10.1021/am2010114 ↗
24. Synthesis and properties of thermo-and pH-sensitive poly (diallyldimethylammonium chloride)/poly (N, N-diethylacrylamide) semi-IPN hydrogel10.1016/j.cej.2010.02.034 ↗
25. Synthesis and characteristics of interpenetrating polymer network hydrogels composed of alginate and poly (diallydimethylammonium chloride)10.1002/app.13615 ↗
26. Experimental investigation on the characteristics of polyethylene glycol/cement composites as thermal energy storage materials10.1002/ceat.201000102 ↗
27. Surface functionalization of poly (L-lactide-co-glycolide) membranes with amphiphilic poly (2-oxazoline) for guided tissue regeneration and treatment of bone tissue defects
28. Effects of nonionic surfactants on oxide-to-polysilicon selectivity during chemical mechanical polishing10.1149/1.1488650 ↗
29. Effect of hydrogen termination on the work of adhesion between rough polycrystalline silicon surfaces10.1063/1.365045 ↗
30. Properties and biocompatibility of chitosan films modified by blending with PEG10.1016/S0142-9612(01)00403-3 ↗
31. Effect of polysilicon wettability on polishing and organic defects during CMP10.1149/1.3225905 ↗
32. Hydrogenated silicon carbide thin films prepared with high deposition rate by hot wire chemical vapor deposition method10.1155/2014/905903 ↗
33. Formation mechanism and optical characterization of polymorphic silicon nanostructures by DC arc-discharge10.1039/C5RA11738K ↗
34. AES and XPS studies of semi‐insulating polycrystalline silicon (SIPOS) layers10.1149/1.2128793 ↗
35. Selective fabrication of SiC/Si diodes by excimer laser under ambient conditions10.1109/LED.2015.2508479 ↗
36. A method to derivatize surface silanol groups to Si-alkyl groups in carbon-doped silicon oxides10.1039/C6RA20355H ↗
37. PDADMAC/PAA semi-IPN hydrogel-coated PVDF membrane for robust anti-wetting in membrane distillation10.1016/j.jiec.2019.01.035 ↗
38. Detachment of particles from surfaces: an AFM study10.1006/jcis.2000.7218 ↗
39. Novel cleaning solutions for polysilicon film post chemical mechanical polishing10.1109/55.847373 ↗