Performance effects of doping engineering on graphene-like C3N as an anode material for alkali metal ion batteries
Source abstract
Abstract
Abstract Growing demands for rechargeable batteries have promoted the design of high-performance electrode materials. Based on first-principles calculations, we investigate the selected B-doping C3N monolayer as an alternative anode material for Li-, Na-, and K-ion batteries. Doping substrates have provided higher adsorption energy for alkali metal atoms than that of pristine substrate. The electron loss of C3N monolayer caused by B-doping will strengthen the adsorption of alkali metal atoms on the system, and prevent the cluster formation of alkali metal atoms. Therefore, it can improve the recycle stability of alkali metal ion batteries. More interestingly, compared with the pristine C3N monolayer, the B4-doped C3N systems have an enhanced specific capacity for these alkali metal atoms. Furthermore, the B4-doped C3N substrates with the adsorption of alkali metal atoms have highly thermal stabilities verified by ab-initio molecular dynamics simulations. The diffusion barriers of Li, Na and K atoms on the B4-doped C3N systems have slightly increase, which are still smaller than the threshold (0.5 eV) for metal migration at room temperature. These above analysis indicate that the B-doping in the C3N monolayer can improve its performance as an anode material for alkali metal ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Graphene research and applications · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Li absorption and intercalation in single layer graphene and few layer graphene by first principles10.1021/nl3019164 ↗
3. The effect of LiBF4 concentration on the discharge and stability of LiMn2O4 half cell Li ion batteries10.1016/j.mssp.2015.04.018 ↗
4. Review of recent development of in situ/operando characterization techniques for lithium battery research10.1002/adma.201806620 ↗
5. Bruno · 2015 · 517
6. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
7. Is lithium the new gold?10.1038/nchem.680 ↗
8. Research development on sodium-ion batteries10.1021/cr500192f ↗
9. Potassium secondary batteries10.1021/acsami.6b07989 ↗
10. Some thoughts on publishing clinical data:10.1097/01.NUR.0000289754.31231.80 ↗
11. Potassium intercalation into graphite to realize high-voltage/high-power potassium-ion batteries and potassium-ion capacitors10.1016/j.elecom.2015.09.002 ↗
12. Two-dimensional GeP3 as a high capacity anode material for non-lithium-ion batteries10.1021/acs.jpcc.8b11574 ↗
13. A computational study of the insertion of Li, Na, and Mg atoms into Si(111) nanosheets10.1016/j.nanoen.2013.04.007 ↗
14. Semiconducting borophene as a promising anode material for Li-ion and Na-ion batteries10.1016/j.mssp.2018.09.025 ↗
15. Phosphorene as a promising anode material for (Li/Na/Mg)-ion batteries: a first-principle study10.1016/j.solmat.2017.06.034 ↗
16. Sodium adsorption and diffusion on monolayer black phosphorus with intrinsic defects10.1016/j.apsusc.2017.08.199 ↗
17. Strain-engineered two-dimensional MoS2 as anode material for performance enhancement of Li/Na-ion batteries10.1038/s41598-018-20334-z ↗
18. Two-dimensional transition metal dichalcogenide monolayers as promising sodium ion battery anodes10.1021/acs.jpcc.5b09935 ↗
19. Mo2C as a high capacity anode material: a first-principles study
20. Ti3C2 MXene as a high capacity electrode material for metal (Li, Na, K, Ca) ion batteries10.1021/am501144q ↗
21. Beryllium doped graphene as an efficient anode material for lithium-ion batteries with significantly huge capacity: a DFT study10.1016/j.apmt.2017.08.013 ↗
22. Boron-doped graphene as a promising anode material for potassium-ion batteries with a large capacity, high rate performance, and good cycling stability10.1021/acs.jpcc.7b07583 ↗
23. 2D Hydrogenated graphene-like borophene as a high capacity anode material for improved Li/Na ion batteries: a first principles study10.1016/j.mtener.2018.02.003 ↗
24. Ab initio study of sodium diffusion and adsorption on boron-doped graphyne as promising anode material in sodium-ion batteries10.1039/C8CP04088E ↗
25. Two-dimensional polyaniline (C\r, 3\r, N) from carbonized organic single crystals in solid state10.1073/pnas.1605318113 ↗
26. Trap effects on vacancy defect of C3N as anode material in Li-ion battery10.1016/j.apsusc.2018.12.275 ↗
27. Graphene-like carbon–nitride monolayer: a potential anode material for Na- and K-ion batteries10.1021/acs.jpcc.7b09433 ↗
28. Adsorption of carbon monoxide on the pristine, B- and Al-doped C3N nanosheets10.1007/s00894-015-2648-7 ↗
29. Repairing single and double atomic vacancies in a C3N monolayer with CO or NO molecules: a first-principles study10.1039/C8CP01653D ↗
30. Carbon excess C3N: a potential candidate as Li-ion battery material10.1021/acsami.8b14183 ↗
31. Boron-doped C3N monolayer as a promising metal-free oxygen reduction reaction catalyst: a theoretical insight10.1021/acs.jpcc.8b05171 ↗
32. First-principles study of the role of strain and hydrogenation on C3N10.1016/j.carbon.2018.03.068 ↗
33. Adsorption of metallic, metalloidic, and nonmetallic adatoms on two-dimensional C3N10.1021/acs.jpcc.7b04511 ↗
34. The SIESTA method for ab initio order-N materials simulation10.1088/0953-8984/14/11/302 ↗
35. Implementation of gradient-corrected exchange-correlation potentials in Car-Parrinello total-energy calculations10.1103/PhysRevB.50.4954 ↗
36. Comment on 'Generalized gradient approximation made simple'
37. Efficient pseudopotentials for plane-wave calculations10.1103/PhysRevB.43.1993 ↗
38. Efficacious form for model pseudopotentials10.1103/PhysRevLett.48.1425 ↗
39. Semiempirical GGA-type density functional constructed with a long-range dispersion correction10.1002/jcc.20495 ↗
40. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
41. Twin graphene: a novel two-dimensional semiconducting carbon allotrope10.1016/j.carbon.2017.03.067 ↗
42. High-precision sampling for Brillouin-zone integration in metals10.1103/PhysRevB.40.3616 ↗
43. Germanium monosulfide monolayer: a novel two-dimensional semiconductor with a high carrier mobility10.1039/C6TC00454G ↗
44. Two-dimensional tetragonal GaN as potential molecule sensors for NO and NO2 detection: a first-principle study10.1021/acsomega.7b01586 ↗
45. Boron phosphide monolayer as a potential anode material for alkali metal-based batteries10.1039/C6TA09264K ↗
46. Gas adsorption on the pristine monolayer GeP3: a first-principles calculation10.1016/j.vacuum.2019.03.020 ↗
47. Borophane as a bench-mate of graphene: a potential 2D material for anode of Li and Na-ion batteries10.1021/acsami.7b01421 ↗
48. A promising anode material for lithium-ion batteries with high mobility and storage10.1039/c3ta12639k ↗
49. First-principles study of metal adatom adsorption on graphene10.1103/PhysRevB.77.235430 ↗
50. First principles study of P-doped borophene as anode materials for lithium ion batteries10.1016/j.apsusc.2017.08.178 ↗
51. Two-dimensional GeP3 as a high capacity electrode material for Li-ion batteries10.1039/C7CP04758D ↗
52. A climbing image nudged elastic band method for finding saddle points and minimum energy paths10.1063/1.1329672 ↗
53. The potential application of phosphorene as an anode material in Li-ion batteries10.1039/C4TA04368E ↗
54. Theoretical prediction of Mon2 monolayer as a high capacity electrode material for metal ion batteries10.1039/C6TA07065E ↗
55. Adsorption and migration of alkali metals (Li, Na, and K) on pristine and defective graphene surfaces10.1039/C8NR10383F ↗