Investigation of electrochemical behavior and polishing mechanism in electrochemical mechanical polishing of cobalt
Source abstract
Abstract
When the technology node of large-scale integrated circuit manufacturing develops to 5 nm and below, cobalt is considered to replace the diffusion barrier layer Ta/TaN and still needs to be polished. In this paper, the influences of voltage, downpressure, polishing speed of head and disc on cobalt electrochemical mechanical polishing (ECMP) is explored through experiments and measurements. The optimal polishing conditions are determined combining the material removal rate (MRR) and surface quality. They are 2 V polishing voltage, 2 psi downpressure, 110 rpm polishing head speed, and 105 rpm polishing disc speed. The MRR of cobalt can reach 147.02 nm/min, and the surface roughness after polishing is 0.46 nm. In addition, in situ dynamic polarization and friction curves, electrochemical impedance spectroscopy, XPS and AFM are used to investigate the electrochemical behavior and reaction mechanism of cobalt ECMP.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Effects of electrochemical mechanical polishing on the polishing efficiency and quality of Co with H2O2 and BTA under alkaline conditions10.1149/2162-8777/ac3058 ↗
2. Mechano-oxidation during cobalt polishing10.1016/j.wear.2018.09.005 ↗
3. An optimized passivation mechanism at the copper film recess for achieving efficient planarization of copper chemical mechanical polishing10.1016/j.mssp.2021.106321 ↗
4. On the use of (3-trimethoxysilylpropyl) diethylenetriamine self-assembled monolayers as seed layers for the growth of Mn based copper diffusion barrier layers10.1016/j.apsusc.2017.08.020 ↗
5. In situ study of mechanical-electrochemical interactions during cobalt ECMP10.1149/2.0661805jes ↗
6. Effect of chelating agent and surfactant on TaN CMP in weakly alkaline slurry10.1149/2.0071811jss ↗
7. Effect of ionic strength on ruthenium CMP in H2O2-based slurries10.1016/j.apsusc.2014.08.063 ↗
8. Roles and mechanism analysis of chitosan as a green additive in low-tech node copper film chemical mechanical polishing10.1016/j.colsurfa.2019.124293 ↗
9. Effects of nitrilotriacetic acid and corrosion inhibitor on cobalt barrier chemical–mechanical polishing: experimental and density functional theory analysis10.1016/j.colsurfa.2020.125392 ↗
10. Mechanism of Co liner as enhancement layer for Cu interconnect gap-fill10.1149/2.009312jes ↗
11. The effect of structural properties of benzo derivative on the inhibition performance for copper corrosion in alkaline medium: experimental and theoretical investigations10.1016/j.colsurfa.2022.129531 ↗
12. Chemical roles of peroxide-based alkaline slurries in chemical-mechanical polishing of Ta: investigation of surface reactions using time-resolved impedance spectroscopy10.1016/j.matchemphys.2004.03.016 ↗
13. Environment friendly chemical mechanical polishing of copper
14. Method for ultra rapid determination of the lubrication mechanism in chemical mechanical planarization
15. Chemical mechanical polishing: theory and experiment10.1007/s40544-013-0035-x ↗
16. Scratch formation and its mechanism in chemical mechanical planarization (CMP)10.1007/s40544-013-0026-y ↗
17. Mechanical effect of process condition and abrasive concentration on material removal rate profile in copper chemical mechanical planarization10.1016/j.jmatprotec.2008.04.021 ↗
18. Material removal efficiency improvement by orientation control of CMP pad surface asperities
19. Effects of chemical additives of CMP slurry on surface mechanical characteristics and material removal of copper10.1007/s11249-011-9874-7 ↗
20. Chemical mechanical polishing of silicon wafers using developed uniformly dispersed colloidal silica in slurry10.1016/j.jmapro.2023.01.007 ↗
21. Atomic-scale surface of fused silica induced by chemical mechanical polishing with controlled size spherical ceria abrasives10.1016/j.jmapro.2022.12.008 ↗
22. Study on enhancement and mechanism of K2SO4 in CMP slurries for copper film polishing removal effect10.1016/j.mssp.2022.107176 ↗
23. Non-contact post-CMP megasonic cleaning of cobalt wafers10.1016/j.mssp.2022.107278 ↗
24. Mechano-chemical polishing of silicon wafers10.1016/S0924-0136(03)00827-6 ↗
25. The effect of glycine and benzotriazole on corrosion and polishing properties of cobalt in acid slurry10.1149/2.036209jes ↗
26. Adsorption–desorption study of benzotriazole in a phosphate-based electrolyte for Cu electrochemical mechanical planarization10.1016/j.electacta.2009.11.104 ↗
27. Theoretical and electrochemical analysis on inhibition effect of benzotriazole and 1,2,4-triazole on cobalt surface10.1016/j.colsurfa.2020.124516 ↗
28. Experimental validation and molecular dynamics simulation of removal of PO residue on Co surface by alkaline cleaning solution with different functional groups10.1016/j.colsurfa.2020.125932 ↗
29. Beol cu CMP process evaluation for advanced technology nodes10.1149/2.042312jes ↗
30. Cobalt polishing with reduced galvanic corrosion at copper/cobalt interface using hydrogen peroxide as an oxidizer in colloidal silica-based slurries10.1149/2.073206jes ↗
31. Two-step electrochemical mechanical polishing of pure copper10.1149/2.0091911jss ↗
32. Electrochemical behaviour of cobalt in aqueous solutions of different pH10.1023/A:1003893122201 ↗
33. Characterization of different cobalt surfaces and interactions with benzotriazole for CMP application10.1149/2162-8777/aba331 ↗
34. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
35. Ammonium persulfate and potassium oleate containing silica dispersions for chemical mechanical polishing for cobalt interconnect applications10.1149/2.0021905jss ↗
36. Corrosion of copper in 0.1 M hydrochloric acid solution with benzotriazole as corrosion inhibitor10.1134/S2070205120040048 ↗
37. Adsorption mechanism of potassium oleate on cobalt surface based on cobalt interconnection CMP: a Combined Experimental and DFT Investigation10.1149/2162-8777/abe1d8 ↗
38. Effects of process parameters on chemical-mechanical interactions during sapphire polishing10.1016/j.mee.2019.111029 ↗
39. Research on influences of contact force in chemical mechanical polishing (CMP) process10.1063/1.4903700 ↗