Effect of anodizing time on the structural color and photocatalytic properties of the TiO2 films formed by electrochemical method
Source abstract
Abstract
Environmentally friendly materials are gaining more and more importance day by day. Structural colored materials without chemical pigments have become popular in this respect. It was aimed to produce structurally colored, photocatalytic TiO2 film coatings on the Titanium substrates using the anodizing method. Since the TiO2 structure, which has photocatalytic properties, is not covered with any coating such as paint, the function of cleaning the environment with solar energy is preserved. The crystallite sizes of the anatase and rutile phases were found between 22.18 and 22.18 nm. The highest photocatalytic efficiency was obtained at the sample anodized for 60 s with 60% efficiency. The surface morphologies of the samples were transformed into a worm-like morphology after anodization for 600 s. These regular indentations of the worm-like structure create extra coherent light scattering in the red region, similar to the photonic crystal surfaces. So, the main outcome is that the obtained colors can be controlled by Photonic Crystal morphologies. Also, extremely eco-friendly, multifunctional TiO2 film coatings with both structural color and photocatalytic properties were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Chlorination disinfection by-products, public health risk tradeoffs and me10.1016/j.watres.2009.02.011 ↗
2. SiO2/TiO2 one-dimensional photonic crystals doped with Sm and Ce rare-earth elements for enhanced structural colors10.1016/j.apsusc.2018.12.234 ↗
3. Tunable colors in opals and inverse opal photonic crystals (vol 20, pg 2565, 2010)10.1002/adfm.201090122 ↗
4. Nanofabrication and coloration study of artificial Morpho butterfly wings with aligned lamellae layers
5. Optical properties of the scales of Morpho rhetenor butterflies: theoretical and experimental investigation of the back-scattering of light in the visible spectrum10.1098/rsif.2004.0006 ↗
6. Mechanisms of structural colour in the Morpho butterfly: cooperation of regularity and irregularity in an iridescent scale10.1098/rspb.2002.2019 ↗
7. Comparison of Sm3+ and Tb3+ dopant effects on the silica-based three-dimensional inverse opal photonic crystal coatings10.1007/s10854-021-05502-8 ↗
8. Structurally colored silica photonic crystal coatings modified by Ce or Eu rare-earth dopants
9. Comparison of the effect of non-metal and rare-earth element doping on structural and optical properties of CuO/TiO2 one-dimensional photonic crystals
10. Lithography-free and highly angle sensitive structural coloration using fabry-perot resonance of tin10.1007/s40684-021-00324-9 ↗
11. Controllable tuning of Fabry-Perot cavities via laser printing10.1039/D0TC01662D ↗
12. Large-area, lithography-free super Absorbers and color Filters at visible frequencies using ultrathin metallic films10.1021/ph500410u ↗
13. Adsorptive removal and photocatalytic degradation of organic pollutants using metal oxides and their composites: a comprehensive review10.1016/j.cis.2019.102009 ↗
14. Facile synthesis of diverse transition metal oxide nanoparticles and electrochemical properties10.1039/C6QI00096G ↗
15. Study of the highly ordered TiO2 nanotubes physical properties prepared with two-step anodization10.1016/j.rinp.2018.02.009 ↗
16. TiO2 Nanotube arrays: Influence of tube length on the photocatalytic degradation of Paraquat10.1016/j.apcatb.2016.04.040 ↗
17. Colour properties of barrier anodic oxide films on aluminium and titanium studied with total reflectance and spectroscopic ellipsometry10.1016/j.surfcoat.2004.01.021 ↗
18. Titanium anodisation designed for surface colouration-Systemisation of parametric interaction using response surface methodology10.1016/j.matdes.2017.11.026 ↗
19. Influence of electrolyte composition on the microstructure and photocatalytic activity of TiO2 nanostructures10.1007/s41779-021-00676-0 ↗
20. Achieving rapid Li-ion insertion kinetics in TiO 2 mesoporous nanotube arrays for bifunctional high-rate energy storage smart windows10.1039/C7NR07703C ↗
21. TiO2 nanotubes for bone regeneration10.1016/j.tibtech.2012.02.005 ↗
22. Effects of structure of anodic TiO2 nanotube arrays on photocatalytic activity for the degradation of 2, 3-dichlorophenol in aqueous solution10.1016/j.jhazmat.2008.06.033 ↗
23. Simple one-pot polyol synthesis of Pd nanoparticles, TiO2 microrods and reduced graphene oxide ternary composite for sensing NH3 gas at room temperature10.1016/j.snb.2017.07.199 ↗
24. Influence of anodization parameters on morphology of TiO2 nanostructured surfaces10.5185/amlett.2016.6156 ↗
25. A comparative study on the photocatalytic activities of microporous and nanoporous TiO2 layers prepared by electrochemical anodization10.1016/j.surfcoat.2014.12.076 ↗
26. Development of structural colored TiO2 thin films by varied etching solutions10.1088/2053-1591/acd0a3 ↗
27. Lithium-ion intercalation into TiO2-B nanowires10.1002/adma.200400795 ↗
28. Synthesis and investigation of TiO2 nanotube arrays prepared by anodization and their photocatalytic activity10.1016/j.ceramint.2012.04.026 ↗
29. Influence of anodization parameters on the expansion factor of TiO2 nanotubes10.1016/j.electacta.2012.12.094 ↗
30. Colorizing titanium-6aluminum-4vanadium alloy using electrochemical anodization: developing a color chart10.1016/j.prosdent.2017.02.010 ↗
31. Photonic TiO2 photoelectrodes for environmental protections: Can color be used as a quick selection indicator for photoelectrocatalytic performance?
32. Tuning the structural color of a 2D photonic crystal using a bowl-like nanostructure10.1021/acsami.6b03717 ↗
33. TiO2 thin films derived by facile sol-gel method: Influence of spin rate and Al-doping on the optical and electronic properties10.1016/j.mtcomm.2021.102924 ↗
34. Photocatalytic reduction of methylene blue by TiO 2 nanotube arrays: effects of TiO 2 crystalline phase10.1007/s10853-010-4254-5 ↗
35. The effects of growth conditions on the surface properties and photocatalytic activities of anatase TiO 2 films prepared via electrochemical anodizing and annealing methods10.1007/s10934-017-0393-2 ↗
36. Effect of processing temperature on the morphology and crystal structure of anodic TiO 2 nanotubes10.1007/s11664-019-07864-6 ↗
37. Mäntele · 2017 · 965
38. Effect of substrate on surface morphology and photocatalysis of large-scale TiO2 films10.1016/j.apsusc.2012.10.156 ↗
39. Low-temperature crystallization of anodized TiO 2 nanotubes at the solid–gas interface and their photoelectrochemical properties10.1039/c3nr01286g ↗
40. Spontaneous phase and morphology transformations of anodized titania nanotubes induced by water at room temperature10.1021/nl2015262 ↗
41. The size and valence state effect of Pt on photocatalytic H2 evolution over platinized TiO2 photocatalyst10.1016/j.ijhydene.2013.11.041 ↗
42. X-ray analysis of nanoporous TiO2 synthesized by electrochemical anodization10.1016/j.spmi.2013.09.016 ↗
43. Enhanced photocatalytic activity of wool-ball-like TiO2 microspheres on carbon fabric and FTO substrates
44. High purity anatase TiO2 nanocrystals: near room-temperature synthesis, grain growth kinetics, and surface hydration chemistry10.1021/ja050517g ↗
45. Photoactivity and phase stability of ZrO2-doped anatase-type TiO2 directly formed as nanometer-sized particles by hydrolysis under hydrothermal conditions10.1016/S0022-4596(02)00013-0 ↗
46. Pressure-temperature studies of anatase, brookite rutile, and Ti02 (II): a discussion
47. Kinetics of the anatase-rutile transformation10.1111/j.1151-2916.1965.tb14774.x ↗
48. The effect of the anodization voltage on the geometrical characteristics and photocatalytic activity of TiO2 nanotube arrays10.1016/j.nanoso.2016.09.001 ↗
49. Formation of TiO2 nanotubes via anodization and potential applications for photocatalysts, biomedical materials, and photoelectrochemical cell
50. Room-temperature synthesis of nanocrystalline titanium dioxide via electrochemical anodization10.1016/j.mssp.2014.03.023 ↗
51. Calibration of the Raman spectrum to the oxygen stoichiometry of nanophase TiO210.1063/1.104274 ↗
52. Crystallinity control of TiO 2 hollow shells through resin-protected calcination for enhanced photocatalytic activity10.1039/C4EE02618G ↗
53. Studies on acetone sensing characteristics of ZnO thin film prepared by sol–gel dip coating10.1016/j.jallcom.2016.02.222 ↗
54. Size–strain study of NiO nanoparticles by X-ray powder diffraction line broadening10.1016/j.matlet.2011.12.046 ↗
55. Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD10.4236/wjnse.2012.23020 ↗
56. The effect of crystalline phase (anatase, brookite and rutile) and size on the photocatalytic activity of calcined polymorphic titanium dioxide (TiO2)10.1016/j.polymdegradstab.2018.02.008 ↗
57. Effect of HF/HNO3-treatment on the porous structure and cell penetrability of titanium (Ti) scaffold10.1016/j.matdes.2018.02.059 ↗
58. The effects of anodization parameters on titania nanotube arrays and dye sensitized solar cells10.1088/0957-4484/19/40/405701 ↗
59. A new one-dimensional photonic crystal combination of TiO2/CuO for structural color applications10.1016/j.ceramint.2019.07.119 ↗
60. Optical properties of Ti, Zr, and Hf from 0.15 to 30 eV10.1103/PhysRevB.11.3617 ↗
61. Refractive indices of rutile and sphalerite10.1364/JOSA.41.000416 ↗
62. A new concept for the eco-friendly structural colorization of anodic titania: Photonic crystal structure
63. Pure commercial titanium color anodizing and corrosion resistance10.1007/s11665-011-9860-0 ↗
64. H2 and O2 photocatalytic production on TiO2 nanotube arrays: Effect of the anodization time on structural features and photoactivity10.1016/j.apcatb.2013.01.054 ↗
65. TiO2-assisted photocatalytic degradation of azo dyes in aqueous solution: kinetic and mechanistic investigations: a review10.1016/j.apcatb.2003.11.010 ↗
66. Non-metal doping of transition metal oxides for visible-light photocatalysis10.1016/j.cattod.2013.10.088 ↗
67. Effect of two-step annealing on photoelectrochemical properties of hydrothermally prepared Ti-doped Fe2O3 films
68. Photoheat-induced Schottky nanojunction and indirect Mott transition in VO2: photocurrent analysis10.1088/0953-8984/28/8/085602 ↗
69. Synthesis of ZnO/SmMnO 3 in a hexane-water interface with increased photocatalytic malachite green degradation10.1016/j.chemosphere.2022.135125 ↗
70. Biosynthesis of Dy2O3 nanoparticles using Piper Retrofractum Vahl extract: optical, structural, morphological, and photocatalytic properties10.1016/j.molstruc.2022.133123 ↗
71. Production of Zn-doped TiO2 film with enhanced photocatalytic activity
72. Effects of particle size on the structure and photocatalytic performance by alkali-treated TiO210.3390/nano10030546 ↗
73. Tube-in-Tube TiO2 Nanotubes with porous walls: fabrication, formation mechanism, and photocatalytic properties10.1002/smll.201001849 ↗
74. A new concept for the eco-friendly structural colorization of anodic titania: Photonic crystal structure10.1016/j.colsurfa.2021.127748 ↗