journal article·2023-03

Non-contact Post-CMP megasonic cleaning of cobalt wafers

Lifei Zhang, Xinchun Lu, Ahmed A. Busnaina

Publisher page

Abstract

As feature size shrinks to 10 nm node and below, cobalt (Co) has been considered as one of the most promising replacements for both diffusion barrier layers as well as the copper conductive layer of interconnects. The cleaning process of Co films after chemical mechanical planarization (CMP) is vital to ensure the interconnection devices’ yields and functionalities. This paper presents a study of non-contact megasonic cleaning approach for post-CMP cleaning of Co films. The research focuses on post-CMP megasonic cleaning with and without chemistry to assess the effect of physical and chemical cleaning of Co films. We evaluate the effect of citric acid on the nanoparticle removal efficiency for Co films assisted with megasonic acoustic streaming. In terms of mechanical megasonic action, the acoustic streaming flow reduces the boundary layer thickness to less than one micron above the surface of the wafer, and that allows a high velocity within less than a micron boundary layer thickness applied the particles on the surface of the wafer. In chemical respect, the nanoparticle removal from Co surfaces can be attributed to the undercutting effect accelerated by complexation at low pH values, whereas the adsorption of citrate ions on Co oxide layers plays a critical role in alkaline regions. Moreover, the effects of megasonic parameters, including cleaning pressure amplitude (power), substrate exposure time, and cleaning tank flow rate on the nanoparticle removal efficiency have been investigated. The results show that the maximum cleaning efficiency of Co films with deionized water only yields 52.7% removal efficiency utilizing 66% power, 87 s cleaning time, and 1.1 GPM (gallons per minute) flow rate. When citric acid is utilized, a cleaning efficiency of ∼99% or higher can be reached with 100% power, 59 s cleaning time, and 5 mM citric acid at pH 11. This demonstrates that both a cleaning chemistry and a physical cleaning force are both needed to achieve an effective post-CMP cleaning for Co films.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques · Microfluidic and Bio-sensing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Wang · 2014
2. Wang · 2013
3. Damascene copper electroplating for chip interconnections10.1147/rd.425.0567 ↗
4. Ammonium persulfate and potassium oleate containing silica dispersions for chemical mechanical polishing for cobalt interconnect applications10.1149/2.0021905jss ↗
5. Potassium persulfate as an oxidizer in chemical mechanical polishing slurries relevant for copper interconnects with cobalt barrier layers
6. Moumen · 1999 · 250
7. Experimental and numerical investigation of nanoparticle removal using acoustic streaming and the effect of time10.1149/1.2217287 ↗
8. Translational motion of a spherical bubble in an acoustic standing wave of high intensity10.1063/1.1458597 ↗
9. Theoretical evaluation of megasonic cleaning for submicron particles10.1149/1.1838065 ↗
10. Nanoscale defects and surface preparation in nanomanufacturing
11. Mechanism of particle removal by megasonic waves10.1063/1.3089820 ↗
12. Roles of cavitation and acoustic streaming in megasonic cleaning10.1080/02726359908906815 ↗
13. An experimental study of megasonic cleaning of silicon wafers10.1149/1.2050096 ↗
14. Post-CMP megasonic cleaning using dilute SC1 solution
15. Post-CMP cleaning using acoustic streaming10.1007/s11664-998-0143-y ↗
16. The effect of citric acid based cleaning solution on particle adhesion and removal during post-Cu CMP10.1016/j.mee.2019.111090 ↗
17. The role of carboxylic acids on nanoparticle removal in post CMP cleaning process for cobalt interconnects
18. The London-van der Waals attraction between spherical particles10.1016/S0031-8914(37)80203-7 ↗
19. Effect of humidity and aging on adhesion and removal of glass particles from FPD glass10.1179/026708401101518015 ↗
20. Particle adhesion and removal mechanisms in post-CMP cleaning processes10.1109/TSM.2002.804872 ↗
21. Lithium-cobalt citrate precursors in the preparation of interaction electrode materials10.1021/cm960009t ↗
22. Adsorption at solid/solution interfaces