journal article·2022-08

Effect of novel green inhibitor on corrosion and chemical mechanical polishing properties of cobalt in alkaline slurry

Haoran Li, Baoguo Zhang, Ye Li, Pengfei Wu, Ye Wang, Mengchen Xie

Publisher page

Abstract

The galvanic corrosion between copper (Cu) and cobalt (Co) has been widely concerned. Generally, the method of increasing Co corrosion potential is adopted to reduce the corrosion potential difference between Cu/Co. In this paper, the inhibitory mechanism of phytic acid on corrosion of Co, a new green corrosion inhibitor, was studied systematically. The inhibitory effect of phytic acid on Co was studied by dynamic and static electrochemical experiment. The corrosion potential of Co under static condition is higher than that of dynamic condition. The chemical mechanical polishing (CMP) experiments and atomic force microscopy (AFM) tests showed that the introduction of phytic acid increased the material removal rate (from 279 Å/min to 520 Å/min) and surface quality (Rq from 1.74 nm to 0.29 nm) of Co, respectively. The results of Nikon microscope and scanning electron microscope (SEM) showed that phytic acid had inhibitory effect on Co. XPS experimental results showed that the complexation reaction between PA and Co 2+ generated macromolecular substance Co-PA, which was combined with other substances on the surface of Co and formed a new passivation layer to protect the surface of Co from corrosion. The chemical bond between Co 2+ and PA is easy to move, which increases the RR of Co.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced materials and composites · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Solid-state processing of oxidation-resistant molybdenum borosilicate composites for ultra-high-temperature applications10.1007/s10853-014-8485-8 ↗
2. Iridium barriers for direct copper electrodeposition in damascene processing10.1149/1.2150165 ↗
3. CVD of cobalt-tungsten alloy film as a novel copper diffusion barrier10.1016/j.mee.2012.08.008 ↗
4. Copper metallization reliability10.1016/S0026-2714(99)00177-8 ↗
5. Copper metallization influence on power MOS reliability10.1016/S0026-2714(03)00027-1 ↗
6. Filling narrow trenches by iodine-catalyzed CVD of copper and manganese on manganese nitride barrier/adhesion layers10.1149/1.3556699 ↗
7. Synergetic effect of potassium molybdate and benzotriazole on the CMP of ruthenium and copper in KIO4-based slurry10.1016/j.apsusc.2014.09.062 ↗
8. Chemical interactions and mechanisms of different pH regulators on copper and cobalt removal rate of copper film CMP for GLSI10.1149/2.0101902jss ↗
9. Cobalt nanoparticle with tunable size supported on nitrogen-deficient graphitic carbon nitride for efficient visible light driven H-2 evolution reaction10.1016/j.cej.2019.122576 ↗
10. Surrounding gate vertical-channel FET with a gate length of 40 nm using BEOL-compatible high-thermal-tolerance in-Al-Zn oxide channel10.1109/TED.2020.3021996 ↗
11. Environment-friendly chemical-mechanical polishing of copper10.1016/j.apsusc.2018.10.133 ↗
12. Green chemical-mechanical polishing of sapphire wafers using a novel slurry10.1039/D0NR04705H ↗
13. A novel slurry for chemical-mechanical polishing of single-crystal diamond10.1016/j.apsusc.2021.150431 ↗
14. A novel approach of chemical mechanical polishing for a titanium alloy using an environment-friendly slurry10.1016/j.apsusc.2017.08.064 ↗
15. Novel rotary chemical-mechanical polishing on an integral impeller10.1016/j.jmapro.2021.04.010 ↗
16. Development of a novel chemical-mechanical polishing slurry and its polishing mechanisms on a nickel alloy10.1016/j.apsusc.2019.144670 ↗
17. Chemical mechanical polishing for sapphire wafers using a developed slurry10.1016/j.jmapro.2021.01.004 ↗
18. Synergetic effect of H2O2 and glycine on cobalt CMP in weakly alkaline slurry10.1016/j.mee.2014.02.002 ↗
19. Chemical mechanical polishing of chemical vapor deposited Co films with minimal corrosion in the Cu/Co/Mn/SiCOH patterned structures10.1149/2.0171705jss ↗
20. Chemical mechanical polishing and planarization of Mn-based barrier/Ru liner films in Cu interconnects for advanced metallization nodes10.1149/2.0161705jss ↗
21. Cobalt polishing with reduced galvanic corrosion at copper/cobalt interface using hydrogen peroxide as an oxidizer in colloidal silica-based slurries10.1149/2.073206jes ↗
22. Role of 1,2,4-triazole as a passivating agent for cobalt during post-chemical mechanical planarization cleaning10.1149/2.093403jes ↗
23. Characterization of 1, 2, 4-triazole as corrosion inhibitor for chemical mechanical polishing of cobalt in H2O2 based acid slurry10.1149/2.0131905jss ↗
24. Approaches to sustainability in chemical mechanical polishing (CMP): a review
25. Chemical and mechanical aspects of a Co-Cu planarization scheme based on an alkaline slurry formulation10.1149/2.0271602jss ↗
26. The effect of H2O2 and 2-MT on the chemical mechanical polishing of cobalt adhesion layer in acid slurry10.1149/2.017204esl ↗
27. Role of 1,2,4-triazole in Co/Cu removal rate selectivity and galvanic corrosion during barrier CMP10.1149/2.0091712jss ↗
28. Inhibition effect of TT-LYK on Cu corrosion and galvanic corrosion between Cu and Co during CMP in alkaline slurry10.1149/2.0181908jss ↗
29. The Research progress of green copper corrosion inhibitor
30. Xi
31. Use of quartz vibration for weighing thin films on a microbalance
32. Tribo-electrochemical investigation of a slurry composition to reduce dissolution and galvanic corrosion during chemical mechanical planarization of Cu-Ru interconnects10.1016/j.matchemphys.2017.08.052 ↗
33. Synergistic effect of mixing cationic and nonionic surfactants on corrosion inhibition of mild steel in HCl: experimental and theoretical investigations10.1016/j.jcis.2018.01.088 ↗
34. Complex formation of phytic acid with selected monovalent and divalent metals10.3389/fchem.2020.582746 ↗
35. Mechanism of cathodic reduction of cobalt pyrophosphate complex10.1134/S1070427212050096 ↗
36. X-ray photoelectron spectroscopic studies of thin-film oxides of cobalt and molybdenum10.1002/sia.740150406 ↗
37. Interpretation of the x-ray photoemission spectra of cobalt oxides and cobalt oxide surfaces10.1016/0039-6028(76)90026-1 ↗
38. Potassium persulfate as an oxidizer in chemical mechanical polishing slurries relevant for copper interconnects with cobalt barrier layers10.1007/s10853-020-04579-6 ↗