Tuning figure of merit in Na doped nanocrystalline PbSnTeSe high entropy alloy via band engineering
Source abstract
Abstract
The new generation thermoelectric material research warrants novel composition tailoring and advanced processing to explore the commendable thermoelectric properties. In this context, the multi-component alloy design with engineered configuration entropy and band tuning approach is proposed for the nanocrystalline lead tin selenide telluride (PbSnTeSe) high entropy alloy (HEA) with sodium (Na) doping of concentrations 0.01 at.% and 0.02 at.% at different vacancy sites of Pb and Sn. The HEA samples were synthesized via mechanical alloying (MA) and spark plasma sintering (SPS). The first principle study using virtual crystal approximation (VCA) confirms that Na occupies Pb/Sn substitutional doping sites in the PbSnTeSe HEA. The complex chemical gradient tailoring through high entropy stabilization and nanostructuring favors the low thermal conductivity (<1.2W/mK). The substitutional doping of Na of 0.01 at.% in Pb site of PbSnTeSe HEA shows a significant effect in the band tuning, thereby increasing the absolute Seebeck coefficient (S) from 159.67 μV/K to 230 μV/K lead towards a high power factor of 15.18×10 −4W/mK 2. Thus, it results in a superior figure of merit (ZT) of 0.84 in nanocrystalline Pb 0 .99SnTeSe-Na 0. 01 HEA at 573K which is a commendable improvement of 182% than the PbSnTeSe pristine HEA (ZT=0.46).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Perfectionism, Procrastination, Anxiety Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Thermoelectric materials and heat exchangers for power generation – a review10.1016/j.rser.2018.07.003 ↗
2. The bridge between the materials and devices of thermoelectric power generators10.1039/C6EE02488B ↗
3. Complex thermoelectric materials10.1038/nmat2090 ↗
4. A review on the enhancement of figure of merit from bulk to nano-thermoelectric materials10.1016/j.nanoen.2012.10.005 ↗
5. Routes for high-performance thermoelectric materials10.1016/j.mattod.2018.03.039 ↗
6. Thermoelectric generator (TEG) technologies and applications10.1016/j.ijft.2021.100063 ↗
7. Present and future thermoelectric materials toward wearable energy harvesting10.1016/j.apmt.2019.04.007 ↗
8. Recent advances in thermoelectric materials10.1016/j.pmatsci.2016.07.002 ↗
9. Thermoelectric materials: energy conversion between heat and electricity10.1016/j.jmat.2015.01.001 ↗
10. Thermoelectrical properties of Bi2Te3 nanocomposites
11. A new rapid synthesis of thermoelectric Sb2Te3 ingots using selective laser melting 3D printing10.1016/j.mssp.2020.105551 ↗
12. Thermoelectric properties of SiGe thin films prepared by laser sintering of nanograin powders10.1016/j.jallcom.2019.153182 ↗
13. Structural features and thermoelectric properties of spark plasma assisted combustion synthesised Magnesium silicide doped with Aluminium10.1016/j.matchemphys.2019.122407 ↗
14. Realizing high-efficiency power generation in low-cost PbS-based thermoelectric materials10.1039/C9EE03410B ↗
15. Enhanced thermoelectric performance of PbTe bulk materials with figure of merit zT >2 by multi-functional alloying10.1016/j.jmat.2016.05.005 ↗
16. Recent progress and futuristic development of PbSe thermoelectric materials and devices10.1016/j.mtener.2018.06.010 ↗
17. Routes for advancing SnTe thermoelectrics10.1039/D0TA05458E ↗
18. High-performance SnSe thermoelectric materials: progress and future challenge10.1016/j.pmatsci.2018.04.005 ↗
19. Advances in thermoelectrics10.1080/00018732.2018.1551715 ↗
20. Superior thermoelectric performance in PbTe–PbS pseudo-binary: extremely low thermal conductivity and modulated carrier concentration10.1039/C5EE01147G ↗
21. Thermoelectric alloys between PbSe and PbS with effective thermal conductivity reduction and high figure of merit10.1039/c3ta14929c ↗
22. Thermoelectric performance of SnS and SnS–SnSe solid solution10.1039/C4TA06955B ↗
23. Synergetic approach for superior thermoelectric performance in PbTe-PbSe-PbS quaternary alloys and composites10.3390/en13010072 ↗
24. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
25. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
26. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
27. High-entropy alloys: a critical assessment of their founding principles and future prospects10.1080/09506608.2016.1180020 ↗
28. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
29. More than entropy in high-entropy alloys: forming solid solutions or amorphous phase10.1016/j.intermet.2013.05.002 ↗
30. Thermoelectric high-entropy alloys with low lattice thermal conductivity10.1039/C5RA28088E ↗
31. Thermoelectric performance of PbSnTeSe high-entropy alloys10.1080/21663831.2016.1244116 ↗
32. An all‐electron numerical method for solving the local density functional for polyatomic molecules10.1063/1.458452 ↗
33. From molecules to solids with the DMol3 approach10.1063/1.1316015 ↗
34. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
35. Hybrid functionals based on a screened Coulomb potential10.1063/1.1564060 ↗
36. Zhang · 2005
37. Virtual crystal approximation revisited: application to dielectric and piezoelectric properties of perovskites10.1103/PhysRevB.61.7877 ↗
38. Thermoelectric efficiency and compatibility10.1103/PhysRevLett.91.148301 ↗
39. Estimation of the thermal band gap of a semiconductor from seebeck measurements10.1007/s11664-999-0211-y ↗