journal article·2022-02

One-pot low-energy synthesis of rGO-CuO hybrid for detection of NO2 at room temperature

Jing Hu, Miao Cheng, Tao Wei, Qianqian Liu, Wanfei Li, Yun Ling, Yafei Zhang, Bo Liu

Publisher page

Abstract

Abstract We reported a mild one-step co-precipitation method to synthesis reduced graphene oxide (rGO-CuO) hybrid at room temperature. It is a low-energy consumption as well as eco-friendly method and shows great advantages in preparation of rGO-based nanocomposites. The CuO nano-leafs wrapped by rGO nanosheets results in the rGO-CuO hybrid which exhibits a fluffy framework structure. When employed in a gas sensor device, the hybrid demonstrates an ultra-sensitive behavior and performs a ∼6.3 response within 30 s–100 ppb NO2 gas at room temperature. The influence of humidity on sensing performance of the as-prepared rGO-CuO sensor has been systematically investigated. The excellent sensing behavior can be attributed to the surface pre-adsorbed OH−/H2O, rough surface of the CuO nano-leafs and the constructed fluffy framework structure of rGO-CuO hybrid. Such a facile strategy not only provides new ideas for low-power synthetic composites, but also offers an important reference for developing of highly sensitive room temperature sensors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Room-temperature ammonia sensor based on cationic surfactant-assisted nanocrystalline CuO10.1021/am900914h ↗
2. Suspended CuO nanowires for ppb level H2S sensing in dry and humid atmosphere10.1016/j.snb.2013.06.044 ↗
3. Surface accumulation conduction controlled sensing characteristic of p-type CuO nanorods induced by oxygen adsorption10.1088/0957-4484/18/14/145506 ↗
4. Reduced graphene oxide conjugated Cu2O nanowire mesocrystals for high-performance NO2 gas sensor10.1021/ja211683m ↗
5. One-pot synthesis and hierarchical assembly of hollow Cu2O microspheres with nanocrystals-composed porous multishell and their gas-sensing properties10.1002/adfm.200601146 ↗
6. Simple self-assembly of 3D laminated CuO/SnO2 hybrid for the detection of triethylamine10.1016/j.cclet.2020.01.009 ↗
7. Hierarchically porous CuO hollow spheres fabricated via a one-pot template-free method for high-performance gas sensors10.1021/jp212029n ↗
8. CuO nanosheets for sensitive and selective determination of H2S with high recovery ability10.1021/jp106098z ↗
9. CuO nanostructures as quartz crystal microbalance sensing layers for detection of trace hydrogen cyanide gas10.1021/es201121w ↗
10. Room-temperature high-performance H2S sensor based on porous CuO nanosheets prepared by hydrothermal method10.1021/acsami.6b02893 ↗
11. Novel NO2 gas sensor based on cuprous oxide thin films10.1016/j.snb.2005.03.061 ↗
12. Influence of iron and nitrogen ion beam exposure on the gas sensing properties of CuO nanowires10.1016/j.snb.2020.128579 ↗
13. Binder-free CuO nanoneedle arrays based tube-type sensor for H2S gas sensing10.1016/j.snb.2020.128993 ↗
14. Facile wet chemical synthesis of Al doped CuO nanoleaves for carbon monoxide gas sensor applications10.1016/j.mssp.2019.104767 ↗
15. Ultra-sensitive and selective p-xylene gas sensor at low operating temperature utilizing Zn doped CuO nanoplatelets: insignificant vestiges of oxygen vacancies10.1016/j.jcis.2020.05.030 ↗
16. Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays10.1016/j.mssp.2020.105196 ↗
17. Surface defect engineering in 2D nanomaterials for photocatalysis10.1002/adfm.201801983 ↗
18. A novel method to fabricate two-dimensional nanomaterial based on electrospinning10.1016/j.compositesa.2021.106275 ↗
19. Tuning gas-sensing properties of reduced graphene oxide using tin oxide nanocrystals10.1039/c2jm30378g ↗
20. Graphene and graphene oxide: synthesis, properties, and applications10.1002/adma.201001068 ↗
21. Microwave-assisted preparation of hierarchical CuO@rGO nanostructures and their enhanced low-temperature H2S-sensing performance10.1016/j.apsusc.2019.01.019 ↗
22. A room-temperature NO2 gas sensor based on CuO nanoflakes modified with rGO nanosheets10.1016/j.snb.2021.129783 ↗
23. Electrochemical behavior of CuO/rGO nanopellets for flexible supercapacitor, non-enzymatic glucose, and H2O2 sensing application10.1016/j.ceramint.2021.02.238 ↗
24. Humidity-sensing properties of urchinlike CuO nanostructures modified by reduced graphene oxide10.1021/am404858z ↗
25. Enhanced NO2 sensing performance of reduced graphene oxide by in situ anchoring carbon dots10.1039/C7TC01208J ↗
26. Three-dimensional conductive networks based on stacked SiO2@graphene frameworks for enhanced gas sensing10.1039/C6NR06465E ↗
27. An ultrasensitive NO2 gas sensor based on a hierarchical Cu2O/CuO mesocrystal nanoflower10.1039/C8TA04404J ↗
28. Porous CuO nanotubes/graphene with sandwich architecture as high-performance anodes for lithium-ion batteries10.1039/C6NR07802H ↗
29. High ammonia sensitive ability of novel Cu12Sb4S13 quantum dots@reduced graphene oxide nanosheet composites at room temperature10.1016/j.cclet.2019.12.030 ↗
30. Hierarchical CuO nanoflowers: water-required synthesis and their application in a nonenzymatic glucose biosensor10.1039/c3cp50922b ↗
31. Low-temperature hydrothermal synthesis of WO3 nanorods and their sensing properties for NO210.1039/c2jm30997a ↗
32. Humidity-compensating sensor for volatile organic compounds using stacked porous silicon photonic crystals10.1002/adfm.200701494 ↗
33. Humidity effect on ammonia sensing properties of substituted and unsubstituted cobalt phthalocyanines10.1016/j.talanta.2012.04.037 ↗
34. Gas sensing properties of p-type hollow NiO hemispheres prepared by polymeric colloidal templating method10.1016/j.snb.2010.12.031 ↗
35. Understanding the fundamental principles of metal oxide based gas sensors; the example of CO sensing with SnO2 sensors in the presence of humidity10.1088/0953-8984/15/20/201 ↗
36. Photoluminescent C-dots@RGO probe for sensitive and selective detection of acetylcholine10.1021/ac303613d ↗
37. Vibrational properties of CuO and Cu4O3 from first-principles calculations, and Raman and infrared spectroscopy10.1021/jp303096m ↗
38. Graphene-based carbon nano-fibers grown on thin-sheet sinter-locked Ni-fiber as self-supported electrodes for supercapacitors10.1016/j.matlet.2009.10.047 ↗
39. Ultrafast room-temperature reduction of graphene oxide by sodium borohydride, sodium molybdate and hydrochloric acid10.1016/j.cclet.2020.03.045 ↗
40. Highly aligned Cu2O/CuO/TiO2 core/shell nanowire arrays as photocathodes for water photoelectrolysis10.1039/C2TA00918H ↗
41. Down to ppb level NO2 detection by ZnO/rGO heterojunction based chemiresistive sensors10.1016/j.cej.2020.125491 ↗
42. Andreas hierlemann, and henry baltes, tuning sensitivity and selectivity of complementary metal oxide semiconductor-based capacitive chemical microsensors10.1021/ac0352272 ↗
43. Ceramic sensors for humidity detection: the state-of-the-art and future developments10.1016/0925-4005(94)01268-M ↗
44. NO2 sensing properties of Cr2WO6 gas sensor in air and N2 atmospheres10.3389/fchem.2019.00907 ↗
45. Surface morphology-dependent room-temperature LaFeO3 nanostructure thin films as selective NO2 gas sensor prepared by radio frequency magnetron sputtering10.1021/am503318y ↗
46. F. Meng, T. Qi, J. Zhang, H. Zhu, Z. Yuan, C. Liu, W. Qin, M. Ding, MoS2-templated porous hollow MoO3 microspheres for highly selective ammonia sensing via a Lewis acid-base interaction, IEEE Trans. Ind. Electron. DOI 10.1109/TIE.2021.3053902.
47. Influence of the addition of nano-TiO2 and ZnO on the sensing performance of micro-ZnSnO3 ethanol sensors under UV illumination10.1016/j.snb.2018.08.114 ↗
48. Ultrasensitive and low detection limit of nitrogen dioxide gas sensor based on flower-like ZnO hierarchical nanostructure modified by reduced graphene oxide10.1016/j.snb.2017.04.190 ↗
49. Al doped narcissus-like ZnO for enhanced NO2 sensing performance: an experimental and DFT investigation10.1016/j.snb.2019.127489 ↗
50. One-step synthesis of 2D C3N4-tin oxide gas sensors for enhanced acetone vapor detection10.1016/j.snb.2017.06.176 ↗
51. Nanostructure-based optoelectronic sensing of vapor phase explosives-a promising but challenging method10.1039/c3nr03792d ↗
52. Effects on electronic properties of molecule adsorption on CuO surfaces and nanowires10.1021/jp1039089 ↗
53. Conductometric chemical sensor based on individual CuO nanowires10.1088/0957-4484/21/48/485502 ↗