journal article·2021-12

Compositional dynamics of the electron transport layer (ZnO:PEIE) in P3HT:PC61BM organic solar cells

Kalyani D. Kadam, Honggyun Kim, Shania Rehman, Harshada Patil, Jamal Aziz, Tukaram D. Dongale, Muhammad Farooq Khan, Deok-kee Kim

Publisher page

Abstract

Abstract This study elucidates a comparison between zinc oxide (ZnO) and zinc oxide:Polyethylenimine ethoxylated (ZnO:PEIE) nanocomposite as an electron transport layer (ETL). The impact of ZnO:PEIE annealing temperature to increase the fill factor (FF) and current density (Jsc) of the devices was first studied after optimizing the doping concentration of PEIE. It was found that 0.4 wt% concentration and 150 °C annealing temperature of ZnO:PEIE ETL showed a superior performance for the devices. The introduction of PEIE promoted the charge transport by decreasing the work function of ZnO, which caused an improvement in the conductivity and current density of devices. For ZnO, the efficiency was 1.25%, which was enhanced to 1.46% with 0.4 wt% PEIE doping and further enhanced to 1.53% at 150 °C annealing temperature. The crystallinity of the ETL can be enhanced by choosing an effective annealing temperature that assists in increasing the current density and fill factor. This research work offers a desirable approach for the synthesis of high-performance organic solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Visible light emission from semiconducting polymer diodes10.1063/1.105039 ↗
2. Light-emitting diodes based on conjugated polymers10.1038/347539a0 ↗
3. Polyethylene imine as an ideal interlayer for highly efficient inverted polymer light‐emitting diodes10.1002/adfm.201304163 ↗
4. Two-dimensional charge transport in self-organized, high-mobility conjugated polymers10.1038/44359 ↗
5. Polyethylenimine (PEI) as an effective dopant to conveniently convert ambipolar and p-type polymers into unipolar n-type polymers10.1021/acsami.5b05097 ↗
6. Chemical reaction between an ITIC electron acceptor and an amine-containing interfacial layer in non-fullerene solar cells10.1039/C7TA10306A ↗
7. High efficiency inverted polymer solar cells controlled by the thickness of polyethylenimine ethoxylated (PEIE) interfacial layers10.1039/C4CP03484H ↗
8. Recent advances in organic solar cells10.1155/2007/40285 ↗
9. Structure–processing–property correlations in solution-processed, small-molecule, organic solar cells10.1039/c3tc30774c ↗
10. Efficiency of bulk-heterojunction organic solar cells10.1016/j.progpolymsci.2013.05.001 ↗
11. Interface modification of a highly air-stable polymer solar cell10.1016/j.solmat.2011.11.032 ↗
12. Fluorinated polyethylene glycol as cathode interlayer with enhanced dipole strength for efficient organic solar cells10.1016/j.solener.2019.01.016 ↗
13. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
14. High mobility indium oxide electron transport layer for an efficient charge extraction and optimized nanomorphology in organic photovoltaics10.1021/acs.nanolett.8b02452 ↗
15. A high efficiency nonfullerene organic solar cell with optimized crystalline organizations10.1002/adma.201504091 ↗
16. An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO 3 hole selective layer10.1063/1.3039076 ↗
17. ZnO cathode buffer layers for inverted polymer solar cells10.1039/C5EE02510A ↗
18. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
19. Zinc Tin Oxide (ZTO) electron transporting buffer layer in inverted organic solar cell10.1016/j.orgel.2012.01.011 ↗
20. Room temperature solution-processed electron transport layer for organic solar cells10.1016/j.orgel.2013.05.028 ↗
21. Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells10.1016/j.solmat.2011.03.023 ↗
22. High‐efficiency nonfullerene organic solar cells enabled by atomic layer deposited zirconium‐doped zinc oxide10.1002/solr.202000241 ↗
23. Doping of the metal oxide nanostructure and its influence in organic electronics10.1002/adfm.200801639 ↗
24. Solution-processed zinc oxide/polyethylenimine nanocomposites as tunable electron transport layers for highly efficient bulk heterojunction polymer solar cells10.1021/acsami.5b00521 ↗
25. PEIE doped ZnO as a tunable cathode interlayer for efficient polymer solar cells10.1016/j.apsusc.2018.11.166 ↗
26. Metal oxides and noble metals application in organic solar cells10.1016/j.solener.2020.06.084 ↗
27. Metal oxides for interface engineering in polymer solar cells10.1039/c2jm33838f ↗
28. Roll-to-roll printed stable and thickness-independent ZnO: PEI composite electron transport layer for inverted organic solar cells10.1016/j.solener.2019.09.037 ↗
29. Zinc oxide: conjugated polymer nanocomposite as cathode buffer layer for solution processed inverted organic solar cells10.1016/j.solmat.2015.05.039 ↗
30. Efficient solution‐processed small‐molecule solar cells with inverted structure10.1002/adma.201300295 ↗
31. Annealing-free ZnO: PEI composite cathode interfacial layer for efficient organic solar cells10.1021/acsphotonics.7b01096 ↗
32. Low temperature efficient interconnecting layer for tandem polymer solar cells10.1016/j.nanoen.2014.09.026 ↗
33. Optimization of interconnecting layers for double-and triple-junction polymer solar cells10.1109/JPHOTOV.2015.2478659 ↗
34. Synthesis, and optoelectronic properties of arrayed p-type ZnO nanorods grown on ZnO film/Si wafer in aqueous solutions10.1016/j.cplett.2005.01.047 ↗
35. 8.9% single‐stack inverted polymer solar cells with electron‐rich polymer nanolayer‐modified inorganic electron‐collecting buffer layers10.1002/aenm.201301692 ↗
36. Polyethylenimine ethoxylated interlayer-mediated ZnO interfacial engineering for high-performance and low-temperature processed flexible perovskite solar cells: a simple and viable route for one-step processed CH3NH3PbI310.1016/j.jpowsour.2019.226956 ↗
37. Effects of deposition temperature on characteristics of Ga-doped ZnO film prepared by highly efficient cylindrical rotating magnetron sputtering for organic solar cells10.1016/j.solmat.2010.09.036 ↗
38. Influence of annealing on ZnO films grown by metal–organic chemical vapor deposition10.1016/j.matlet.2004.07.014 ↗
39. Polyethylenimine ethoxylated interlayer-mediated ZnO interfacial engineering for high-performance and low-temperature processed flexible perovskite solar cells: a simple and viable route for one-step processed CH3NH3PbI310.1016/j.jpowsour.2019.226956 ↗
40. A universal method to produce low–work function electrodes for organic electronics10.1126/science.1218829 ↗
41. Fabrication of undoped ZnO thin film via photosensitive sol–gel method and its applications for an electron transport layer of organic solar cells10.1016/j.apsusc.2015.05.170 ↗
42. Alcohol-soluble n-type conjugated polyelectrolyte as electron transport layer for polymer solar cells10.1021/acs.macromol.5b01137 ↗
43. Nongeminate recombination and charge transport limitations in diketopyrrolopyrrole‐based solution‐processed small molecule solar cells10.1002/adfm.201202643 ↗
44. A novel donor–acceptor alternating copolymer based on angular-shaped benzo [2, 1-b: 3, 4-b′] diselenophene for bulk heterojunction solar cells10.1039/C4PY01519C ↗
45. Zhou · 2014 · 19
46. Regular organic solar cells with efficiency over 10% and promoted stability by ligand‐and thermal annealing‐free Al‐doped ZnO cathode interlayer10.1002/advs.201700053 ↗
47. Real reason for high ideality factor in organic solar cells: energy disorder10.1016/j.solener.2018.11.067 ↗
48. Polymer solar cells with enhanced fill factors10.1038/nphoton.2013.207 ↗
49. Reducing ultraviolet-induced open-circuit voltage loss in inverted organic solar cells by maintaining charge selectivity of the electron collection contact using polyethylenimine10.1016/j.solener.2020.01.058 ↗