Effects of aging time in hydrogen peroxide-glycine-based Cu CMP slurry
Source abstract
Abstract
Hydrogen peroxide is widely used as an oxidizer in metal chemical mechanical planarization (CMP) slurry due to its strong oxidizing ability and being a non-metal product. However, hydrogen peroxide is unstable and easily decomposes into water and oxygen molecules. In this experiment, the aging of a hydrogen peroxide-glycine-based Cu CMP slurry was investigated in terms of the chemical concentration and CMP performance. Ultraviolet–visible–near-infrared spectroscopy was used to measure the change of hydrogen peroxide concentration with slurry aging. As the slurry aging time was increased, the removal rate decreased for several reasons. With slurry aging, not only decreases of hydrogen peroxide concentration but also decreases of pH and glycine decomposition were observed. Therefore, the removal rate was suppressed due to complex factors, including the decreased oxidizing ability with decreased hydrogen peroxide concentration, decomposition of the glycine chelating agent, and decrease in pH. This study suggests the necessity of monitoring slurry aging and management for optimizing CMP process performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Oliver · 2004 · vol. 69
2. Li · 2007
3. Review on copper chemical–mechanical polishing (CMP) and post-CMP cleaning in ultra large system integrated (ULSI)—an electrochemical perspective10.1016/j.electacta.2006.07.039 ↗
4. Slurry components in metal chemical mechanical planarization (CMP) process: a review10.1007/s12541-016-0201-y ↗
5. Chemical mechanical planarization: slurry chemistry, materials, and mechanisms10.1021/cr900170z ↗
6. Effect of glycine on copper CMP10.1007/s40684-016-0019-1 ↗
7. Synergistic effect of glycine and BTA on step height reduction efficiency after copper CMP in weakly alkaline slurry10.1149/2.0291612jss ↗
8. Stability of dilute alkaline solutions of hydrogen peroxide10.1021/ie50552a051 ↗
9. Thermal decomposition of hydrogen peroxide in the presence of sulfuric acid10.1007/s10973-007-8829-6 ↗
10. Decomposition of hydrogen peroxide at water− ceramic oxide interfaces10.1021/jp046405d ↗
11. Evaluation of quality of hydrogen peroxide‐based antiseptic solutions available in Dar es Salaam, Tanzania10.1111/j.1365-2710.2007.00868.x ↗
12. Effect of hydrogen peroxide on oxidation of copper in CMP slurries containing glycine and Cu ions10.1016/j.electacta.2004.05.008 ↗
13. Effect of glycine and hydrogen peroxide on chemical–mechanical planarization of copper10.1016/S0040-6090(02)00989-6 ↗
14. Effect of slurry aging on stability and performance of chemical mechanical planarization process10.1016/j.apt.2011.02.002 ↗
15. Improvements of oxide-chemical mechanical polishing performances and aging effect of alumina and silica mixed abrasive slurries10.1016/j.mee.2004.07.062 ↗
16. Real-time pH monitoring of ultra-diluted chemistry with a micro-sampling pH monitor10.1149/06908.0307ecst ↗
17. Hydrogen peroxide concentration monitoring for CMP slurry
18. Influence of slurry components on copper CMP performance in alkaline slurry10.1016/j.mee.2017.10.002 ↗
19. A new weakly alkaline slurry for copper planarization at a reduced down pressure
20. A model of copper CMP10.1149/1.1861175 ↗
21. Electrochemical behaviour of copper in alkaline glycine solutions10.1016/j.hydromet.2018.10.001 ↗
22. Electrochemistry of copper in aqueous glycine solutions10.1149/1.1344532 ↗
23. The role of glycine in the chemical mechanical planarization of copper10.1149/1.1474436 ↗
24. The role of pH on the second harmonic response of glycine sodium nitrate (GSN)
25. Variable temperature NMR characterization of α-glycine10.1016/j.molstruc.2008.02.023 ↗