Morphology, structure and photoelectric properties of F-doped SnO2 films under flexible PET mask reinforced laser annealing
Source abstract
Abstract
Abstract Laser annealing has important significance for performance improvement of transparent conductive oxide (TCO)-based thin films. In this study, we further developed the simple flexible polyethylene terephthalate (PET) mask reinforced laser annealing (FPLA) process through covering a transparent PET sheet on the film surface to achieve performance improvement of fluorine-doped tin oxide (FTO) films. Scan control strategy during FPLA involving scanning speed and scan line spacing was determined by analyzing surface morphology, surface roughness, crystal structure and photoelectric properties of the films. It was found that line-by-line round-trip scanning using the optimal scanning speed of 10 mm/s and scan line spacing of 20 μm resulted in the more effective FPLA effect. The as-obtained FTO film exhibited a low-fluctuated surface with remarkably enlarged and dense particles, the lowest RMS roughness, the largest grain size, and thus the maximum figure of merit of 3.05 × 10−2 Ω−1, which was about 1.8 times that of the direct laser-annealed FTO film using the same parameters. The effectiveness of the PET sheet used for FPLA in redepositing the film materials and inhibiting the decrease of oxygen vacancies was further confirmed by mechanism analysis using SEM, EDX and XPS characterizations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Pt-doped Ni-silicide films formed by pulsed-laser annealing: microstructural evolution and thermally robust Ni1-xPtxSi2 formation10.1016/j.jallcom.2019.02.307 ↗
2. Selective laser ablation and patterning on Ag thin films with width and depth control10.1007/s10854-020-03061-y ↗
3. Nano-structure formed by nanosecond laser annealing on amorphous Si surface10.1016/j.mssp.2006.01.027 ↗
4. Excimer laser annealing: an alternative route and its optimisation to effectively activate Si dopants in AlN films grown by plasma assisted molecular beam epitaxy10.1016/j.materresbull.2017.09.016 ↗
5. Morphological and electrical properties of Nickel based Ohmic contacts formed by laser annealing process on n-type 4H-SiC10.1016/j.mssp.2019.02.031 ↗
6. Formation of the single-phase ferromagnetic semiconductor (Ga,Mn)As by pulsed laser annealing10.1134/S1063783416110056 ↗
7. Reduced contact resistance and improved surface morphology of ohmic contacts on GaN employing KrF laser irradiation10.7567/JJAP.50.04DF06 ↗
8. Effect of Ag layer thickness and scan line spacing during laser annealing of Ag/F-doped SnO2 bilayer composite thin films under ultrasonic vibration assistance10.1016/j.jallcom.2020.154504 ↗
9. Enhancement of exciton emission from ZnO nanocrystalline films by pulsed laser annealing10.1016/j.apsusc.2003.11.038 ↗
10. Performance optimization of fluorine-doped tin oxide thin films by introducing ultrasonic vibration during laser annealing10.1016/j.ceramint.2017.03.036 ↗
11. Laser annealing of thin ITO films on flexible organic substrates10.1134/S1063782619020192 ↗
12. Room temperature indium tin oxide by XeCl excimer laser annealing for flexible display10.1016/j.tsf.2004.01.050 ↗
13. Influences of ultrasonic vibration on morphology and photoelectric properties of F-doped SnO2 thin films during laser annealing10.1016/j.apsusc.2018.07.177 ↗
14. Mechanical and optoelectric properties of post-annealed fluorine-doped tin oxide films by ultraviolet laser irradiation10.1016/j.apsusc.2011.03.091 ↗
15. Performance optimization of SnO2:F thin films under quasi-vacuum laser annealing with covering a transparent PET sheet: a study using processing map10.1016/j.apsusc.2020.145334 ↗
16. Properties of SnO2:Sb films produced on flexible organic substrates by droplet-free pulsed laser deposition method10.1007/s11082-016-0586-y ↗
17. Evaluation of structural properties of AZO conductive films modification using low-temperature ultraviolet laser annealing10.1016/j.ceramint.2019.05.167 ↗
18. Laser annealing effect on optical and electrical properties of Al doped ZnO films10.1016/j.optlastec.2012.06.001 ↗
19. Excimer laser annealing and chemical texturing of ZnO:Al sputtered at room temperature for photovoltaic applications10.1016/j.solmat.2011.05.043 ↗
20. Laser annealing effects on Ga dopants for ZnO thin films for transparent conducting oxide applications10.1016/j.ceramint.2018.12.096 ↗
21. Effects of post-annealing on structural, optical and electrical properties of Al-doped ZnO thin films10.1016/j.apsusc.2010.12.144 ↗
22. Modification of electrical properties induced by annealing of ZnO:B thin films deposited by chemical vapour deposition: kinetic investigation of evolution10.1016/j.mseb.2012.12.012 ↗
23. Pulsed KrF laser annealing of Ni/Si0.76Ge0.24 films10.1063/1.365683 ↗
24. Surface morphology and photoelectric properties of FTO ceramic thin films under a simple transparent cover-assisted laser annealing10.1016/j.materresbull.2018.09.002 ↗
25. Ultrasonic-vibration-assisted laser annealing of fluorine-doped tin oxide thin films for improving optical and electrical properties: overlapping rate optimization10.1016/j.ceramint.2018.08.342 ↗
26. Kinetics of surface-state laser annealing in Si by frequency-swept infrared photothermal radiometry10.1063/1.123870 ↗
27. Parameter optimization in femtosecond pulsed laser etching of fluorine-doped tin oxide films10.1016/j.optlastec.2019.03.031 ↗
28. Femtosecond laser ablation of diamond-like carbon films10.1016/j.apsusc.2003.08.031 ↗
29. Experimental investigation on: laser shock micro-forming process using the mask and flexible pad10.1016/j.optlaseng.2016.08.003 ↗
30. Improving edge quality and optical transmittance of Ag films on glass substrates by selective nanosecond pulsed laser ablation using various scanning methods10.1007/s10854-019-01755-6 ↗
31. One-step fabrication of superhydrophobic surfaces with different adhesion via laser processing10.1016/j.jallcom.2017.12.252 ↗
32. Thermoelectric higher manganese silicide: synthetized, sintered and shaped simultaneously by selective laser sintering/melting additive manufacturing technique10.1016/j.matlet.2017.12.026 ↗
33. Efficient indoor p-i-n hybrid perovskite solar cells using low temperature solution processed NiO as hole extraction layers10.1016/j.solmat.2019.110071 ↗
34. Effects of BN layer on photoelectric properties and stability of flexible Al/Cu/ZnO multilayer thin film10.1016/j.ceramint.2020.02.272 ↗
35. Dip coated nanostructured ZnO thin film: synthesis and application10.1016/j.ceramint.2015.11.125 ↗
36. Enhancing optical and electrical properties of Al-doped ZnO coated polyethylene terephthalate substrates by laser annealing using overlap rate controlling strategy10.1016/j.ceramint.2016.01.118 ↗
37. WB2 to WB3 phase change during reactive spark plasma sintering and pulsed laser ablation/deposition processes10.1016/j.ceramint.2015.03.042 ↗
38. Annealing behaviour of structural and magnetic properties of evaporated Co thin films10.1088/0022-3727/42/13/135406 ↗
39. Effect of annealing treatment on electrical and optical properties of Nb doped TiO2 thin films as a TCO prepared by sol–gel spin coating method10.1016/j.apsusc.2014.08.029 ↗
40. High intense violet luminescence in fluorine doped zinc oxide (FZO) thin films deposited by aerosol assisted CVD10.1016/j.jallcom.2013.05.073 ↗
41. Influence of Al/Cu thickness ratio and deposition sequence on photoelectric property of ZnO/Al/Cu/ZnO multilayer film on PET substrate prepared by RF magnetron sputtering10.1016/j.mssp.2018.11.013 ↗
42. Microstructural, optical and spectroscopic studies of laser ablated nanostructured tantalum oxide thin films10.1016/j.apsusc.2009.03.059 ↗
43. Low temperature rf-sputtered in and Al co-doped ZnO thin films deposited on flexible PET substrate10.1016/j.ceramint.2014.02.101 ↗
44. Evolution in morphological, optical, and electronic properties of ZnO:Al thin films undergoing a laser annealing and etching process10.1016/j.solmat.2014.02.027 ↗
45. Influence of annealing temperature on formation and photoelectric properties of AZO nanosheet-coated FTO-based films10.1007/s10854-016-6112-y ↗
46. Photoluminescence study of laser annealing in phosphorus‐implanted and unimplanted silicon10.1063/1.326699 ↗
47. Structural, optical, photoluminescence and photocatalytic investigations on Fe doped TiO2 thin films10.1016/j.tsf.2013.10.112 ↗
48. Effects of grain size on the initiation and propagation thresholds of stress-induced brittle fractures10.1007/s006030050026 ↗
49. Superhydrophobic and anti-reflective ZnO nanorod-coated FTO transparent conductive thin films prepared by a three-step method10.1016/j.jallcom.2016.03.086 ↗
50. The role of oxygen vacancy in fluorine-doped SnO2 films10.1016/j.physb.2011.02.037 ↗
51. Microscale laser flexible dynamic forming of Cu/Ni laminated composite metal sheets10.1016/j.jmapro.2018.07.013 ↗
52. Conductivity enhancement of ZnO:F thin films by the deposition of SnO2:F over layers for optoelectronic applications10.1016/j.mseb.2012.10.001 ↗
53. Micro-machining of silicon wafer in air and under water10.1016/j.optlastec.2010.05.005 ↗
54. Influence of two gradual steps of vacuum annealing on structural and opto-electronic characteristics of Nb-doped TiO2 transparent conducting oxide10.1016/j.spmi.2018.09.002 ↗
55. The interaction of femtosecond and nanosecond laser pulses with the surface of glass10.1016/S0022-3093(02)01909-9 ↗
56. Static recrystallization and grain growth behaviour of Al0.3CoCrFeNi high entropy alloy10.1016/j.msea.2019.03.088 ↗
57. Excimer laser chemical ammonia patterning on PET film10.1007/s10856-008-3600-5 ↗
58. Darkening effect on AZ31B magnesium alloy surface induced by nanosecond pulse Nd:YAG laser10.1016/j.apsusc.2013.05.011 ↗
59. RHEED and XPS study of cerium interaction with SnO2 (110) surface10.1016/j.ceramint.2013.06.005 ↗
60. Control of oxygen vacancies in ZnO nanorods by annealing and their influence on ZnO/PEDOT:PSS diode behaviour10.1039/C7TC04284A ↗
61. Mutual effects of fluorine dopant and oxygen vacancies on structural and luminescence characteristics of F doped SnO2 nanoparticles10.3390/ma10121398 ↗
62. Magnetic and optical behaviors of SnO2-x thin films with oxygen vacancies prepared by atomic layer deposition10.1016/j.ceramint.2018.11.040 ↗