Influence of CMP damage induced during flattening SiC epitaxial layer on device performances
Source abstract
Abstract
Abstract Thick silicon carbide (SiC) epitaxial layers, which are required for the fabrication of SiC ultra-high voltage devices, have to be flattened by chemical mechanical polishing (CMP) in order to eliminate bunched-step segments, shallow pits, and epi-crowns. However, the negative effects of CMP on device performance is concerning. In this research, we attempted to evaluate a SiC epitaxial layer surface after flattening by CMP and to clarify the extent of CMP damage on the performance of a 4H–SiC PiN diode. As a result, a bundle of dislocation half-loops, which were detected by a mirror electron microscope (MEM) inspection system (Hitachi High-Technologies Mirelis VM-1000), was found to occur beneath the epitaxial layer surface flattened by CMP and led to current leakage of the PiN diode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Carbide Semiconductor Technologies · Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. “Device performance and switching characteristics of 16 kV ultrahigh-voltage SiC flip-type n-channel IE-IGBTs” Materials10.4028/www.scientific.net/MSF.821-823.842 ↗
2. “Current status and perspectives of ultrahigh-voltage SiC power devices10.1016/j.mssp.2017.10.010 ↗
3. Challenges of high-performance and high-reliability in SiC MOS structures10.4028/www.scientific.net/MSF.717-720.703 ↗
4. Non-destructive observation of in-grown stacking faults in 4H-SiC epitaxial layer using mirror electron microscope10.1063/1.3646501 ↗
5. Observation of electron trapping along scratches on SiO2 surface in mirror electron microscope images under ultraviolet light irradiation10.1063/1.3383046 ↗
6. Microstructural analysis of damaged layer introduced during chemo-mechanical polishing10.4028/www.scientific.net/MSF.778-780.370 ↗
7. Analysis of dislocation structures in 4H-SiC by synchrotron X-ray topography10.1541/ieejfms.135.768 ↗
8. “Observation of a latent scratch on chemo-mechanical polished 4H-SiC wafer by mirror projection electron microscopy” Materials10.4028/www.scientific.net/MSF.924.543 ↗
9. Mirror electron inspection system Mirelis VM1000 for enhanced reliability of mobility systems
10. “Emission phenomenon observation of thermal oxides grown on n-type 4H-SiC (0001) wafer” Materials10.4028/www.scientific.net/MSF.679-680.378 ↗
11. Threading dislocations in n- and p-type 4H-SiC material analyzed by etching and synchrotron X-ray topography10.1016/j.jcrysgro.2010.10.145 ↗
12. Wet etching of GaN, AlN, and SiC: a review10.1016/j.mser.2004.11.002 ↗
13. Relationship between threading dislocation and leakage current in 4H-SiC diodes10.1063/1.4718527 ↗
14. Transmission electron microscope study of a threading dislocation with b=[0001]+<1-100> and its effect on leakage in a 4H-SiC MOSFET10.1080/09500839.2013.798047 ↗
15. Annealing induced extended defects in as-grown and ion-implanted 4H-SiC epitaxial layers