journal article·2023-03

Atomic removal mechanism of nano polishing for single-crystal AlN substrate via molecular dynamics

Yan He, Jingting Sun, Peng Gao, Shuyuan Song, Kaiyuan Wang, Meiling Tang

Publisher page

Abstract

Molecular dynamics simulations were performed to research the microscopic atomic removal mechanism of diamond abrasive with sliding, rolling, vibrating and rolling & vibrating movements towards single-crystal AlN substrate. The influence of the sliding depth, sliding velocity, rotation axis, rolling velocity, amplitude and frequency of oscillations on atomic detachment, stacking, force, crystal structure evaluation, stress, radial distribution function and atomic strain was revealed. The results show that stronger mechanical action normally gained more atomic detachment, stacking, amorphization and larger strains. The larger impact of abrasive on the AlN substrate can break more bonds and reduce the cutting force. However, the interaction times between the substrate and the abrasive is reduced due to the higher sliding velocity, which leads to the elastic recovery of the substrate atoms occur quickly. The elastic recovery of the substrate reduces the number of removed atoms, decreases the degree of amorphous structure, and relieves the stress concentration. The rolling movement in reverse y-axis obtains the largest number of atoms detached while in the y-axis obtains the smallest number of atoms stacked and damage. The vibrating movement creates the severest atomic disorder and damage, and highest the number of atoms detached and stacked than other forms of movement, and these characteristics also affected by amplitude and the frequency of oscillation. The rolling movement is beneficial to the release of residual stress and the reduction of substrate damages. The vibrating movement makes it easier for the atoms to leave the initial lattice structure. Therefore, the rolling & vibrating movement produces relatively more atomic removal, less atomic stacking and damage. The adsorbed atoms on the surface of the abrasive and moved synchronously with the abrasive, showing higher temperature. In this study, the atomic removal behavior of AlN under different action forms of abrasive was systematically analyzed on the atomic scale, which provided theoretical guidance for the high-efficiency and low-damage processing of AlN.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Aluminum nitride nanowire light emitting diodes: breaking the fundamental bottleneck of deep ultraviolet light sources
2. Dielectric and polar properties of aluminum nitride single crystals10.1080/00150193.2021.1888260 ↗
3. Room-temperature quantum emitter in aluminum nitride10.1021/acsphotonics.0c00528 ↗
4. Low-destructive processing of single crystal aluminum nitride based on sol-gel polishing tool10.1109/TSM.2021.3062640 ↗
5. Effect of the beryllium acceptor impurity upon the optical properties of single-crystal AlN10.1134/S1063782620030148 ↗
6. Second harmonic generation in phase matched aluminum nitride waveguides and micro-ring resonators10.1063/1.4722941 ↗
7. Kim · 2015 · vol. 62 · 1880
8. Positioning of periodic AlN/GaN multilayers: effect on crystalline quality of a-plane GaN10.1016/j.mssp.2019.104700 ↗
9. Effects of AlN substrate orientation on crystalline quality of wurtzite GaN films investigated via molecular dynamics10.1016/j.commatsci.2021.110991 ↗
10. Plasma-assisted MOCVD growth of non-polar GaN and AlGaN on Si (111) substrates utilizing GaN-AlN buffer layer10.3390/coatings12010094 ↗
11. Research on epitaxial of 250 nm high quality GaN HEMT based on AlN surface leveling technology10.1016/j.apsusc.2020.145339 ↗
12. Investigation on material removal mechanisms in photocatalysis-assisted chemical mechanical polishing of 4H-SiC wafers10.1007/s12541-021-00494-1 ↗
13. Modeling nano-metric manufacturing processes with molecular dynamics method: a review10.2174/1573413712666160530122851 ↗
14. Nano-machining of materials: understanding the process through molecular dynamics simulation10.1007/s40436-016-0155-4 ↗
15. Concise review: recent advances in molecular dynamics simulation of nanomachining of metals10.2174/1573413712666160527150038 ↗
16. Atomistic mechanisms of Si chemical mechanical polishing in aqueous H2O2: ReaxFF reactive molecular dynamics simulations10.1016/j.commatsci.2017.02.005 ↗
17. Study micromechanism of surface planarization in the polishing technology using numerical simulation method10.1016/j.apsusc.2007.01.115 ↗
18. Comparison of morphology and mechanical properties of surfactant aggregates at water-silica and water-graphite interfaces from molecular dynamics simulations10.1016/j.jcis.2005.08.060 ↗
19. Planarization process of single crystalline silicon asperity under abrasive rolling effect studied by molecular dynamics simulation10.1007/s00339-012-7026-z ↗
20. Molecular dynamics investigations on polishing of a silicon wafer with a diamond abrasive10.1007/s00339-010-5570-y ↗
21. Atomistic mechanisms of chemical mechanical polishing of diamond (100) in aqueous H2O2/pure H2O: molecular dynamics simulations using reactiveforce field (ReaxFF)10.1016/j.commatsci.2018.10.041 ↗
22. Sub-nanoscale polishing of single crystal diamond (100) and the chemical behavior of nanoparticles during the polishing process10.1016/j.diamond.2019.107528 ↗
23. Effects of pressure and velocity on the interface friction behavior of diamond utilizing ReaxFF simulations10.1016/j.ijmecsci.2020.106096 ↗
24. Influence mechanism of defects on the subsurface damage and structural evolution of diamond in CMP process10.1016/j.apsusc.2021.150638 ↗
25. Tang · 2020
26. Mechanism of chemical and mechanical mutual promotion in photocatalysis-assisted chemical mechanical polishing for single-crystal SiC
27. Combined ultrasonic vibration and chemical mechanical polishing of copper substrates10.1016/j.ijmachtools.2011.09.009 ↗
28. Ultrasonic flexural vibration assisted chemical mechanical polishing for sapphire substrate10.1016/j.apsusc.2010.01.053 ↗
29. Combined ultrasonic vibration and chemical mechanical polishing of copper substrates10.1016/j.ijmachtools.2011.09.009 ↗
30. Investigation on the material removal and surface generation of a single crystal sic wafer by ultrasonic chemical mechanical polishing combined with ultrasonic lapping10.3390/ma11102022 ↗
31. Investigation of anodic oxidation mechanism of 4H-SiC (0001) for electrochemical mechanical polishing10.1016/j.electacta.2018.03.184 ↗
32. Ultrasonic-assisted anodic oxidation of 4H-SiC (0001) surface10.1016/j.elecom.2019.01.012 ↗
33. Effects of ultrasonic amplitude on sapphire ultrasonic vibration assisted chemical mechanical polishing by experimental and CFD method
34. Revealing nanoscale material deformation mechanism and surface/subsurface characteristics in vibration-assisted nano-grinding of single-crystal iron10.1016/j.apsusc.2022.153692 ↗
35. Comparison of vibration-assisted scratch characteristics of SiC polytypes (3C-, 4H-and 6H-SiC)10.3390/mi13040640 ↗
36. Investigation of the atomistic behavior in nanofinishing single-crystal aluminium nitride with hydroxyl radical ·OH environment10.1016/j.commatsci.2022.111770 ↗
37. Modeling solid-state chemistry: interatomic potentials for multicomponent systems10.1103/PhysRevB.39.5566 ↗
38. A Tersoff-based interatomic potential for wurtzite AlN10.1002/pssa.201001086 ↗
39. Tang · 2021
40. Effects of pressure and velocity on the interface friction behavior of diamond utilizing ReaxFF simulations10.1016/j.ijmecsci.2020.106096 ↗
41. Molecular dynamics simulation of the material removal in the scratching of 4H-SiC and 6H-SiC substrates
42. Effects of cutting parameters on the subsurface damage of single crystal copper during nanocutting process10.1016/j.vacuum.2020.109420 ↗
43. Material removal mechanism during porous silica cluster impact on crystal silicon substrate studied by molecular dynamics simulation10.1016/j.apsusc.2012.09.147 ↗
44. A molecular dynamics investigation into nanoscale scratching mechanism of polycrystalline silicon carbide10.1016/j.commatsci.2018.02.038 ↗
45. Material removal and interactions between an abrasive and a SiC substrate: a molecular dynamics simulation study10.1016/j.ceramint.2019.11.006 ↗
46. Effect of mechanical process parameters on friction behavior and material removal during sapphire chemical mechanical polishing10.1016/j.mee.2011.04.068 ↗
47. Effect of abrasive size on nano abrasive machining for wurtzite GaN single crystal via molecular dynamics study10.1016/j.mssp.2020.105439 ↗