journal article·2022-11

Effect and mechanism analysis of sarcosine on the chemical mechanical polishing performance of copper film for GLSI

Yinchan Zhang, Xinhuan Niu, Jiakai Zhou, Jianchao Wang, Yebo Zhu, Ziyang Hou, Han Yan, Fu Luo, Minghui Qu

Publisher page

Abstract

With the decrease of integrated circuits feature size, chemical mechanical polishing (CMP) of copper (Cu) film for multilayer wiring is faced with new challenges. In order to reduce the step height of Cu film for cobalt-based Cu interconnect during CMP process, the selection of additives in the slurry is crucial. In this paper, sarcosine was used as an important additive in Cu slurry to improve the planarization properties. Through the polarization curves, dynamic polishing, static etching experiments and scanning electron microscopy (SEM) measurement, it was identified sarcosine as a complexing agent and trace functional reagent could improve the Cu planarization properties. Meanwhile, the adsorption and complexation mechanisms of sarcosine on Cu film surface were analyzed by electrochemical tests and X-ray photoelectron spectroscopy (XPS). The improvement of static etching and surface quality of Cu patterned wafers by sarcosine was verified by laser scanning confocal microscopy (LSCM). Low static etch rate (SER) (1658 Å/min), high removal rate (RR) (5091 Å/min), RR/SER of 3.07 and effective correction of the step height on Cu patterned wafers were achieved by the synergistic effect of sarcosine and benzotriazole (BTA). In this study, a green functional reagent for Cu film CMP in low-tech node multilayer wiring was provided, which is good practical application prospects.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Potassium sorbate as an inhibitor in copper chemical mechanical planarization slurry, Part I
2. Seed layer enhancement by electrochemical deposition: the copper seed solution for beyond 45 nm10.1016/j.mee.2007.06.014 ↗
3. Chemical processes in the chemical mechanical polishing of copper10.1016/0254-0584(95)01516-7 ↗
4. Chemical mechanical polishing of inlaid copper structures with Ru/Ta/TaN as barrier/liner layer10.1149/2.0121811jss ↗
5. Environment friendly chemical mechanical polishing of copper10.1016/j.apsusc.2018.10.133 ↗
6. Chemical mechanical polishing for sapphire wafers using a developed slurry10.1016/j.jmapro.2021.01.004 ↗
7. Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy10.1016/j.apsusc.2019.144670 ↗
8. A novel slurry for chemical mechanical polishing of single crystal diamond10.1016/j.apsusc.2021.150431 ↗
9. A novel approach of chemical mechanical polishing for a titanium alloy using an environment-friendly slurry10.1016/j.apsusc.2017.08.064 ↗
10. Changes in surface layer of silicon wafers from diamond scratching10.1016/j.cirp.2015.04.005 ↗
11. Origin and evolution of a crack in silicon induced by a single grain grinding10.1016/j.jmapro.2022.01.037 ↗
12. New deformation-induced nanostructure in silicon10.1021/acs.nanolett.8b01910 ↗
13. A novel process of chemical mechanical polishing for FV520B steel10.1016/j.jmapro.2020.09.052 ↗
14. Green chemical mechanical polishing of sapphire wafers using a novel slurry10.1039/D0NR04705H ↗
15. Role of the adhesion force during copper chemical mechanical planarization10.1149/2.0161808jss ↗
16. Effect of chelating agent and ammonium dodecyl sulfate on the interfacial behavior of copper CMP for GLSI10.1149/2.0231809jss ↗
17. Study on effect of complexing agents on Co oxidation/dissolution for chemical-mechanical polishing and cleaning process10.1016/j.mee.2020.111308 ↗
18. Elucidating Cu-glycine and BTA complexations in Cu-CMP using SIMS and XPS
19. Study on effective methods and mechanism of inhibiting cobalt removal rate in chemical mechanical polishing of GLSI low-tech node copper film10.1149/2.0271910jss ↗
20. A new corrosion inhibitor for copper protection10.1016/j.corsci.2014.03.004 ↗
21. Chemistry of corrosion inhibitors10.1016/S0958-9465(03)00037-4 ↗
22. Chemical mechanical planarization of copper in alkaline slurry with uric acid as inhibitor10.1016/j.electacta.2007.04.044 ↗
23. Chemical roles on Cu-slurry interface during copper chemical mechanical planarization10.1016/j.apsusc.2013.12.150 ↗
24. Characteristics of abrasive-free micelle slurry for copper CMP10.1149/1.1594731 ↗
25. A wafer-scale material removal rate profile model for copper chemical mechanical planarization10.1016/j.ijmachtools.2011.01.007 ↗
26. Inhibition mechanism of benzotriazole in copper chemical mechanical planarization10.4028/www.scientific.net/AMM.607.74 ↗
27. Synergetic effect of benzotriazole and non-ionic surfactant on copper chemical mechanical polishing in KIO4-based slurries10.1016/j.tsf.2014.01.086 ↗
28. 1,2,4-Triazole as a corrosion inhibitor in copper chemical mechanical polishing10.1016/j.tsf.2013.12.047 ↗
29. Effect of serine, threonine and glutamic acid on the corrosion of copper in aerated hydrochloric acid solution10.1016/j.corsci.2008.09.007 ↗
30. Amino acids as copper corrosion inhibitors: a density functional theory approach10.1016/j.apsusc.2020.145905 ↗
31. Surface action mechanism and planarization effect of sarcosine as an auxiliary complexing agent in copper film chemical mechanical polishing10.1016/j.apsusc.2020.147109 ↗
32. Surface corrosion inhibition mechanism of sarcosine as a green novel inhibitor on a novel barrier layer material of cobalt in copper film CMP for GLSI10.1016/j.mssp.2021.106402 ↗
33. Effects of sarcosine, a glycine transporter type 1 inhibitor, in two mouse seizure models10.1016/S1734-1140(10)70279-6 ↗
34. The glycine transport inhibitor sarcosine is an inhibitory glycine receptor against10.1016/j.neuropharm.2009.07.019 ↗
35. Effect of ionic strength on ruthenium CMP in H2O2based slurries10.1016/j.apsusc.2014.08.063 ↗
36. Pourbaix · 1974
37. Study on the film forming mechanism, corrosion inhibition effect and synergistic action of two different inhibitors on copper surface chemical mechanical polishing for GLSI10.1016/j.apsusc.2019.144507 ↗
38. Effect of glycine and hydrogen peroxide on chemical-mechanical planarization of copper10.1016/S0040-6090(02)00989-6 ↗
39. Synergetic effect of H2O2 and glycine on cobalt CMP in weakly alkaline slurry10.1016/j.mee.2014.02.002 ↗
40. Controlling the galvanic corrosion of copper during chemical mechanical planarization of ruthenium barrier films
41. Functions of Trilon® P as a polyamine in copper chemical mechanical polishing10.1016/j.apsusc.2013.10.020 ↗
42. Roles and mechanism analysis of chitosan as a green additive in low-tech node copper film chemical mechanical polishing10.1016/j.colsurfa.2019.124293 ↗
43. Study of non-preston phenomena induced from the passivated additives in copper CMP10.1149/1.2374942 ↗
44. Modification of the Preston equation for the chemical-mechanical polishing of copper10.1016/S0040-6090(98)00896-7 ↗
45. Synergistic roles of mixed inhibitors and the application of mixed complexing ligands in copper chemical mechanical polishing10.1016/j.mee.2011.06.029 ↗
46. A study on exploring the alkaline copper CMP slurry without inhibitors to achieve high planarization efficiency10.1016/j.mee.2016.02.044 ↗
47. Prediction of planarization property in copper film chemical mechanical polishing via response surface methodology and convolutional neural network
48. Buffer contribution to formation enthalpy of copper (II)–bicine complex determined by isothermal titration calorimetry method10.1007/s10973-016-5313-1 ↗
49. Graphene: corrosion-inhibiting coating10.1021/nn203507y ↗
50. Adsorption and corrosion inhibition behavior of imidazole on cobalt electrodes studied by SERS and electrochemical methods10.1360/042005-13 ↗
51. Electrochemical study of bulk and monolayer copper in alkaline solution10.1149/2.0071605jes ↗
52. Intramolecular synergistic effect of glutamic acid, cysteine and glycine against copper corrosion in hydrochloric acid solution10.1016/j.tsf.2011.07.009 ↗
53. Operando electrochemical atomic force microscopy of solid-electrolyte interphase formation on graphite anodes: the evolution of SEI morphology and mechanical properties10.1021/acsami.0c11190 ↗
54. Effects of nitrilotriacetic acid and corrosion inhibitor on cobalt barrier chemical-mechanical polishing: experimental and density functional theory analysis10.1016/j.colsurfa.2020.125392 ↗
55. Investigation on inhibition of ruthenium corrosion by glycine in alkaline sodium hypochlorite based solution10.1016/j.apsusc.2019.144976 ↗
56. Inhibition effect of glycine on molybdenum corrosion during CMP in alkaline H2O2 based abrasive free slurry10.1016/j.apsusc.2017.08.140 ↗
57. Ni(II) complex with sarcosine derived from in situ generated ligand: structural, spectroscopic, and DFT studies10.1007/s11224-015-0631-7 ↗
58. Cukrowski · Anal. Chim. Acta · 2007 · 590 · 20310.1016/j.aca.2007.03.031 ↗
59. Compilation of PZC and IEP of sparingly soluble metal oxides and hydroxides from literature10.1016/j.cis.2009.08.003 ↗
60. Study on the weakly alkaline slurry of copper chemical mechanical planarization for GLSI10.1149/2.0071708jss ↗