An optimized passivation mechanism at the copper film recess for achieving efficient planarization of copper chemical mechanical polishing
Source abstract
Abstract
Abstract This article proposed an improvement plan for the slurry to reduce the dishing caused during copper chemical mechanical polishing (CMP) of the interconnect structure. According to the difference in the pressure between the concave and convex parts of the copper film in the high-hardness polishing pad, polishing slurries were designed with a distinct difference in the polishing removal rate under high and low platen pressures to improve their planarization efficiency. 2 wt% GLY (glycine) and 1 wt% H2O2 can provide a chemical dissolution effect, adding 0.1% TAZ (1,2,4-triazole) to slow down the corrosion mainly for the recession, by adjusting the slurry pH to 7. The polishing results showed that the slurry had a high copper removal rate (6772 A/min) at high pressure (3.0 psi) and a much lower removal rate (3273 A/min) at low pressure (1.2 psi). The pattern wafer polished with this slurry obtained relatively low dishing. The other comparison groups showed slight differences in copper removal rate at high and low pressure and a deeper dishing of the polished pattern wafer. In this paper, based on the analysis of static dissolution experiments, electrochemical experiments, and XPS experiments of copper films in different slurries, the chemical reaction mechanism of copper films in the solution system of GLY and H2O2 was studied at different pH values. In addition, the inhibition mechanism of TAZ on the copper surface at different slurry pH values was proposed, including the properties of the TAZ molecule adsorption film on the copper surface, the uniformity of the surface coverage, and the thickness of the passivation layer. The results can reflect the polishing results to a certain extent despite some deviations, but it can also be used as a more reasonable argument to explain the optimization scheme of the slurry proposed in this article.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Copper Interconnects and Reliability · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Electromigration reliability issues in dual-damascene Cu interconnections10.1109/TR.2002.804737 ↗
2. Electromigration critical length effect in Cu/oxide dual-damascene interconnects10.1063/1.1418034 ↗
3. Electromigration behavior of dual-damascene Cu interconnects––Structure, width, and length dependences10.1016/j.microrel.2003.12.011 ↗
4. Novel slurry solution for dishing elimination in copper process beyond 0.1-μm technology10.1016/j.tsf.2005.07.061 ↗
5. Dependency of dishing on polish time and slurry chemistry in Cu CMP10.1016/S0167-9317(99)00308-1 ↗
6. Green chemical mechanical polishing of sapphire wafers using a novel slurry10.1039/D0NR04705H ↗
7. Environment friendly chemical mechanical polishing of copper10.1016/j.apsusc.2018.10.133 ↗
8. Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy10.1016/j.apsusc.2019.144670 ↗
9. Chemical mechanical polishing for sapphire wafers using a developed slurry10.1016/j.jmapro.2021.01.004 ↗
10. A novel approach of chemical mechanical polishing for a titanium alloy using an environment-friendly slurry10.1016/j.apsusc.2017.08.064 ↗
11. A novel slurry for chemical mechanical polishing of single crystal diamond10.1016/j.apsusc.2021.150431 ↗
12. A novel process of chemical mechanical polishing for FV520B steel10.1016/j.jmapro.2020.09.052 ↗
13. Achievement of high planarization efficiency in CMP of copper at a reduced down pressure10.1016/j.mee.2008.11.047 ↗
14. Electrical characterization of the copper CMP process and derivation of metal layout rules10.1109/TSM.2003.818956 ↗
15. A two‐dimensional process model for chemimechanical polish planarization10.1149/1.2085984 ↗
16. Analytical dishing and step height reduction model for CMP with a viscoelastic pad10.1149/1.1774189 ↗
17. Pattern geometry effects in the chemical‐mechanical polishing of inlaid copper structures10.1149/1.2059241 ↗
18. A physical model for dishing during metal CMP10.1149/1.1611497 ↗
19. Synergistic action mechanism and effect of ammonium dodecyl sulfate and 1,2,4-triazole in alkaline slurry on step height reduction for Cu CMP10.1149/2162-8777/ab80b3 ↗
20. A study on exploring the alkaline copper CMP slurry without inhibitors to achieve high planarization efficiency10.1016/j.mee.2016.02.044 ↗
21. Chemically impregnated abrasives provide high planarization efficiency copper CMP slurry10.1149/06117.0001ecst ↗
22. A new weakly alkaline slurry for copper planarization at a reduced down pressure10.1088/1674-4926/35/2/026005 ↗
23. Planarization properties of an alkaline slurry without an inhibitor on copper patterned wafer CMP10.1088/1674-4926/33/11/116001 ↗
24. The corrosion inhibition of certain azoles on steel in chloride media: electrochemistry and surface analysis10.1016/j.corsci.2016.05.028 ↗
25. Corrosion inhibition of mild steel in acidic medium by simple azole-based aromatic compounds10.1016/j.jelechem.2020.114858 ↗
26. Corrosion inhibition of copper in neutral chloride media by a novel derivative of 1,2,4-triazole10.1016/j.corsci.2011.05.042 ↗
27. The relation between adsorption bonding and corrosion inhibition of azole molecules on copper10.1016/j.corsci.2013.03.016 ↗
28. The influence of adenine on corrosion of copper in chloride solutions10.1016/j.corsci.2008.04.007 ↗
29. Cross-coupling of heteroatomic electrophiles10.1021/acs.chemrev.8b00628 ↗
30. 1,2,4-Triazole as a corrosion inhibitor in copper chemical mechanical polishing10.1016/j.tsf.2013.12.047 ↗
31. Characterization of 1, 2, 4-triazole as corrosion inhibitor for chemical mechanical polishing of cobalt in H2O2 based acid slurry10.1149/2.0131905jss ↗
32. Exploring the potential of a new 1,2,4-triazole derivative for corrosion protection of carbon steel in HCl: a computational and experimental evaluation10.1016/j.colsurfa.2020.124604 ↗
33. Study on the adsorption and inhibition mechanism of 1,2,4-triazole on copper surface in copper interconnection CMP10.1149/2.0121906jss ↗
34. Study on the film forming mechanism, corrosion inhibition effect and synergistic action of two different inhibitors on copper surface chemical mechanical polishing for GLSI10.1016/j.apsusc.2019.144507 ↗
35. The selective leaching of copper from a gold–copper concentrate in glycine solutions10.1016/j.hydromet.2014.09.005 ↗
36. Electrochemical impedance spectroscopic studies of copper dissolution in glycine–hydrogen peroxide solutions10.1007/s10008-010-1037-5 ↗
37. Synergistic effect of composite complex agent on BTA removal in post CMP cleaning of copper interconnection10.1016/j.matchemphys.2020.123230 ↗
38. The effect of structure parameters on the corrosion inhibition effect of some heterocyclic nitrogen organic compounds10.1016/j.molliq.2016.03.012 ↗
39. The influence of N‐heterocyclics on corrosion inhibition and hydrogen permeation through mild steel in acidic solutions10.1108/00035599710165342 ↗
40. Chemistry of the interaction between azole type corrosion inhibitor molecules and metal surfaces10.1016/j.matchemphys.2012.09.030 ↗
41. On the form of adsorption isotherms for substitutional adsorption of molecules of different sizes10.1016/0013-4686(73)85030-3 ↗
42. N,N-Dipropynoxy methyl amine trimethyl phosphonate as corrosion inhibitor for iron in sulfuric acid10.1023/A:1017909919388 ↗
43. Oluyemi · 2013 · vol. 4 · 159
44. Re-evaluation of the century-old Langmuir isotherm for modeling adsorption phenomena in solution10.1016/j.chemphys.2018.06.022 ↗
45. Mixed ad/desorption kinetics unraveled with the equilibrium adsorption isotherm10.1016/j.colsurfa.2019.06.033 ↗
46. The Langmuir isotherm: a commonly applied but misleading approach for the analysis of protein adsorption behavior10.1002/jbm.a.35235 ↗
47. Comparison of linearization methods for modeling the Langmuir adsorption isotherm10.1016/j.molliq.2019.111850 ↗
48. Applicability of the various adsorption models of three dyes adsorption onto activated carbon prepared waste apricot10.1016/j.jhazmat.2005.11.055 ↗
49. Adsorption of sodium lauryl sulfate onto arsenic-bearing ferrihydrite10.1016/S0043-1354(00)00271-2 ↗
50. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
51. Adsorption of supercritical gases in porous media:determination of micropore size distribution10.1021/jp9906536 ↗
52. On the electrochemical behavior of magnesium electrodes in polar aprotic electrolyte solutions10.1016/S0022-0728(99)00146-1 ↗
53. EIS measurement for corrosion monitoring under multiphase flow conditions10.1016/S0013-4686(99)00160-7 ↗
54. Experimental and quantum chemical studies on the corrosion inhibition performance of benzimidazole derivatives for mild steel in HCl10.1021/ie400099q ↗
55. Hydrophobic coatings for improving corrosion resistance of manganese substrate10.1016/j.surfcoat.2018.04.075 ↗
56. Inhibition effect of TT-LYK on Cu corrosion and galvanic corrosion between Cu and Co during CMP in alkaline slurry10.1149/2.0181908jss ↗
57. Prediction of material removal rate for chemical mechanical planarization using decision tree-based ensemble learning10.1115/1.4042051 ↗
58. Semi-empirical material removal rate distribution model for SiO2 chemical mechanical polishing (CMP) processes10.1016/j.precisioneng.2012.12.006 ↗
59. Predictive modeling of material removal rate in chemical mechanical planarization with physics-informed machine learning10.1016/j.wear.2019.02.012 ↗
60. Improvement in chemical mechanical polishing of 4H-SiC wafer by activating persulfate through the synergistic effect of UV and TiO210.1016/j.jmatprotec.2021.117150 ↗
61. Passivation kinetics of 1,2,4-triazole in copper chemical mechanical polishing10.1149/2.0171605jss ↗
62. Study of agglomeration behavior of chemical mechanical polishing slurry under controlled shear environments10.1149/2.0091805jss ↗
63. Method for determining stability of CMP slurry10.1149/2.0241808jss ↗
64. Characterization of the nature of shear-induced agglomerates as hard and soft in chemical mechanical polishing slurries10.1116/1.5065516 ↗
65. Quantification of shear induced agglomeration in chemical mechanical polishing slurries under different chemical environments10.1016/j.mee.2019.03.012 ↗