journal article·2022-02

High carrier mobility tungsten-doped indium oxide films prepared by reactive plasma deposition in pure argon and post annealing

Tian Gan, Jingmei Li, Lili Wu, Jingquan Zhang, Xia Hao, Qingyuan Zhang, Ruixing Li, Wenhui Shi

Publisher page

Abstract

Abstract Tungsten-doped indium oxide films were deposited by reactive plasma deposition using a low doped target in pure argon atmosphere at room temperature. Post thermal annealing was conducted in different atmospheres in the range of 150 °C–250 °C to improve the properties of films. The structural, electrical and optical properties of IWO films with different annealing conditions have been investigated. It is found that crystallization after annealing is an effective way to improve the mobility. The mobility of the polycrystalline films is much greater than amorphous films. And the ordered structure is conducive to interstitial oxygen and oxygen in the atmosphere to fill the oxygen vacancies, leading to the decrease of the carrier concentration and a further increase of the mobility. We have prepared IWO thin films with the carrier mobility (up to 83 cm2V−1s−1), even if as-deposited films had a relatively low carrier mobility (∼30 cm2V−1s−1). The optical transmittance of IWO films maintains 89% and 84% in visible and near-infrared regions, respectively. The mobility of IWO films is found to depend on the manufacture of the source target and the highest mobility of 120 cm2V−1s−1 has been reached.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Structural, electronic, and electrical properties of an undoped n-type CdO thin film with high electron concentration10.1021/jp5040085 ↗
2. An investigation of the influence of different transparent conducting oxide substrates/front contacts on the performance of CdS/CdTe thin-film solar cells10.1007/s10854-017-7838-x ↗
3. Room temperature processed high mobility W-doped In2O3 electrodes coated via in-line arc plasma ion plating for flexible OLEDs and quantum dots LEDs
4. The effect of post annealing temperature on grain size of indium-tin-oxide for optical and electrical properties improvement
5. Tuning optical properties of ITO films grown by rf sputtering: effects of oblique angle deposition and thermal annealing10.1016/S1003-6326(19)65164-2 ↗
6. Highly transparent conducting indium tin oxide thin films prepared by radio frequency magnetron sputtering and thermal annealing10.1166/jnn.2019.16242 ↗
7. The effects of film thickness on the electrical, optical, and structural properties of cylindrical, rotating, magnetron-sputtered ITO films10.1016/j.apsusc.2018.01.318 ↗
8. Structural, electrical and optical properties of highly crystalline indium tin oxide films fabricated by RPD at room temperature10.1016/j.matlet.2016.06.084 ↗
9. High transmittance in IR region of conductive ITO/AZO multilayers deposited by RF magnetron sputtering10.1016/j.ceramint.2018.01.095 ↗
10. Buffer and anode-integrated WO3-doped In2O3 electrodes for PEDOT:PSS-free organic photovoltaics10.1016/j.orgel.2013.02.025 ↗
11. Correlations between the electronic-properties of doped indium oxide ceramics and the nature of the doping element10.1016/0921-5107(92)90339-B ↗
12. High mobility W-doped In2O3 thin films: effect of growth temperature and oxygen pressure on structural, electrical and optical properties10.1016/j.apsusc.2007.07.146 ↗
13. Development of novel tungsten-doped high mobility transparent conductive In2O3 thin films10.1116/1.2333572 ↗
14. Room-temperature rf-magnetron sputter-deposited W-doped indium oxide: decoupling the influence of W dopant and O vacancies on the film properties10.1007/s00339-016-9983-0 ↗
15. Tungsten-doped In2O3 transparent conductive films with high transmittance in near-infrared region10.1016/j.jcrysgro.2008.05.012 ↗
16. High electron mobility W-doped In2O3 thin films by pulsed laser deposition10.1063/1.2048829 ↗
17. Changes in the structural and electrical properties of vacuum post-annealed tungsten- and titanium-doped indium oxide films deposited by radio frequency magnetron sputtering10.1016/j.tsf.2011.08.060 ↗
18. Quantitative analysis of ionization rates of depositing particles in reactive plasma deposition using mass-energy analyzer and Langmuir probe
19. High quality of IWO films prepared at room temperature by reactive plasma deposition for photovoltaic devices10.1088/0022-3727/46/7/075103 ↗
20. High mobility transparent conductive W-doped In2O3 thin films prepared at low substrate temperature and its application to solar cells10.1016/j.solmat.2013.11.030 ↗
21. Characterization of transparent conductive oxide films and their effect on amorphous/crystalline silicon heterojunction solar cells
22. Factors limiting carrier transport of ultrathin W-doped In2O3 films10.1088/1361-6463/ab938b ↗
23. Effect of crystalline structure on optical and electrical properties of IWOH films fabricated by low-damage reactive plasma deposition at room temperature10.1016/j.jallcom.2020.155151 ↗
24. Improved efficiency of Cu(In,Ga)Se2 mini‐module via high‐mobility In2O3:W,H transparent conducting oxide layer10.1002/pip.3123 ↗
25. In2O3-Based transparent conducting oxide films with high electron mobility fabricated at low process temperatures
26. Interference on inordinate orientated particles in X-ray light. III
27. High-throughput optimization of near-infrared-transparent Mo-doped In2O3 thin films with high conductivity by combined use of atmospheric-pressure mist chemical-vapor deposition and sputtering10.1016/j.tsf.2017.02.032 ↗
28. Scattering mechanisms of charge carriers in transparent conducting oxide films10.1007/BF01567122 ↗
29. Transparent conductive oxide thin films of tungsten-doped indium oxide10.1016/j.tsf.2006.07.014 ↗
30. Scattering of electrons and holes by charged donors and acceptors in semiconductors10.1080/14786440808561235 ↗
31. High mobility approaching the intrinsic limit in Ta-doped SnO2 films epitaxially grown on TiO2 (001) substrates10.1038/s41598-020-63800-3 ↗
32. High quality ITO thin films grown by dc and RF sputtering without oxygen10.1088/0022-3727/43/5/055402 ↗
33. Tin doped indium oxide thin films: electrical properties10.1063/1.367025 ↗
34. The electrical properties of polycrystalline silicon films10.1063/1.321593 ↗
35. Carrier transport in polycrystalline ITO and ZnO : Al II: the influence of grain barriers and boundaries10.1016/j.tsf.2007.10.082 ↗
36. Environmental stability of high-mobility indium-oxide based transparent electrodes10.1063/1.4935125 ↗
37. Characterization of indium-tin oxide interfaces using X-ray photoelectron spectroscopy and redox processes of a chemisorbed probe molecule: effect of surface pretreatment conditions10.1021/la011101t ↗
38. Influence of gaseous annealing environment on the properties of indium-tin-oxide thin films10.1063/1.1834984 ↗
39. Correlation of lattice distortion with optical and electrical properties of In2O3 : Sn films10.1063/1.1704852 ↗
40. Effects of substrate temperature on properties of ITO-ZnO composition spread films fabricated by combinatorial RF magnetron sputtering10.1016/j.jssc.2009.07.025 ↗
41. New approach to optical analysis of absorbing thin solid films10.1364/AO.26.001737 ↗
42. Electronic properties of complex crystalline and amorphous phases of Ge and Si .2. Band-structure and optical properties10.1103/PhysRevB.8.2733 ↗
43. Effect of different thermo-treatment at relatively low temperatures on the properties of indium-tin-oxide thin films10.1016/j.tsf.2017.07.022 ↗