journal article·2021-01

Fabrication of 3D porous CoTiO3 photocatalysts for hydrogen evolution application: Preparation and properties study

R.E. Beissenov, A.L. Mereke, A.G. Umirzakov, Z.A. Mansurov, B.A. Rakhmetov, Y.Y. Beisenova, A.A. Shaikenova, D.A. Muratov

Publisher page

Abstract

Abstract Cobalt titanate (CoTiO3) is one of the promising candidates for visible-light-driven photocatalytic water oxidation. In this research, the formation of multilayered 3D porous structures was performed by mixing Co3O4 and TiO2 nanopowders with adding pore-forming agents and further calcination. Different crystallite sizes of porous CoTiO3 were produced by varying the calcination temperature. The fabricated 3D porous CoTiO3 were characterized using XRD, SEM, BET, optical measuring technique. The crystallite size increases with increasing the calcination temperature within the range of 600–800 °C. The photocatalytic activity of 3D porous CoTiO3 was studied by measuring the rate of H2 evolution during the splitting in 0.5 M KOH aqueous solution electrolyte under 300 mW/cm2 xenon lamp irradiation. The SEM images and BET analysis show that an increase in the calcination temperature leads to a decrease of porosity CoTiO3 due to the agglomeration of particles. The change in values of potential and current of CoTiO3 depending on the dark and light conditions showed a certain extent under the light, which is mainly reflected in the drop of the initial voltage, and the hydrogen evolution reaction occurs under the −0.2 V bias voltage. The measured rate of hydrogen production of 3D porous CoTiO3 showed for UV irradiation of 0.3 mmol/g-h and for visible light 0.024 mmol/g-h, respectively. Gas chromatography analysis shows a 13% higher amount of hydrogen production for 3D porous CoTiO3 sample calcined at 800 °C, than at 600 °C. The results of current work not only report but also put forward a strategy of applied advantages the 3D CoTiO3 porous material for efficient visible-light photocatalytic reduction of hydrogen.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Thermo-chemical routes for hydrogen rich gas from biomass: a review10.1016/j.rser.2007.03.005 ↗
2. When will fossil fuel reserves be diminished? Energy Policy 2009;37:181e9. Ni M, Leung DYC, Leung MKH, Sumathy K. An overview of hydrogen production from biomass
3. Catalytic gasification of biomass to produce hydrogen rich gas10.1016/S0360-3199(97)00108-0 ↗
4. A consideration of the economic efficiency of hydrogen production from biomass10.1016/S0360-3199(02)00193-3 ↗
5. Photocatalytic hydrogen and oxygen formation under visible light irradiation with Mi doped InTaO4 (M ¼ Mn, Fe, Co, Ni and Cu) photocatalysts10.1016/S1010-6030(02)00068-0 ↗
6. State-of-the-art progress in the use of ternary metal oxides as photoelectrode materials for water splitting and organic synthesis10.1016/j.nantod.2019.100763 ↗
7. Co-Fe binary metal oxide electrocatalyst with synergistic interface structures for efficient overall water splitting
8. The nonmetal modulation of composition and morphology of g-C3N4-based photocatalysts10.1016/j.apcatb.2020.118828 ↗
9. Synchronously integration of Co, Fe dual-metal doping in Ru@C and CDs for boosted water splitting performances in alkaline media10.1016/j.apcatb.2020.118657 ↗
10. Electronic engineering of transition metal Zn-doped InGaN nanorods arrays for photoelectrochemical water splitting10.1016/j.jpowsour.2019.227578 ↗
11. Separation efficiency of water/oil mixtures by hydrophilic and oleophobic membranes based on stainless steel meshes with openings of various sizes10.18321/ectj721 ↗
12. Cu-doped flower-like hematite nanostructures for efficient water splitting applications10.1016/j.jpcs.2016.07.014 ↗
13. Designing transition metal alloy nanoparticles embedded hierarchically porous carbon nanosheets as high-efficiency electrocatalysts toward full water splitting10.1016/j.jcis.2018.11.017 ↗
14. Development of nitrogen doped carbon dots modified CuCo alloy nanoparticles for potential electrocatalytic water splitting10.1016/j.molliq.2020.113111 ↗
15. Monolayer carbon-encapsulated Mo-doped Ni nanoparticles anchored on single-wall carbon nanotube film for total water splitting10.1016/j.apcatb.2020.118823 ↗
16. Cobalt phosphide nanoparticles supported within network of N-doped carbon nanotube as a multifunctional and scalable electrocatalyst for water splitting
17. Electrodeposited cobalt phosphides with hierarchical nanostructure on biomass carbon for bifunctional water splitting in alkaline solution10.1016/j.jallcom.2020.154535 ↗
18. Aligned composite SrTiO3/PAN fibers as 1D photocatalyst obtained by electrospinning method10.1016/j.cplett.2019.136821 ↗
19. Assembled 3D MOF on 2D nanosheets for self-boosting catalytic synthesis of N-doped carbon nanotube encapsulated metallic Co electrocatalysts for overall water splitting10.1016/j.apcatb.2020.118939 ↗
20. Preparation, characterization and photocatalytic performance of noble metals (Ag, Pd, Pt, Rh) deposited on sponge-like ZnO microcuboids10.1016/j.jpcs.2013.06.014 ↗
21. The role of interface charge transfer on Pt based catalysts for water splitting10.1016/j.ijhydene.2018.06.107 ↗
22. Efficient photocatalytic water-splitting performance by ternary CdS/Pt-N-TiO2 and CdS/Pt-N,F-TiO2: interplay between CdS photo corrosion and TiO2-dopping10.1016/j.apcatb.2019.04.091 ↗
23. Overall noble metal free Ni and Fe doped Cu2ZnSnS4 (CZTS) bifunctional electrocatalytic systems for enhanced water splitting reactions10.1016/j.ijhydene.2019.02.054 ↗
24. Hierarchical trimetallic sulfide FeCo2S4–NiCo2S4 nanosheet arrays supported on a Ti mesh: an efficient 3D bifunctional electrocatalyst for full water splitting10.1016/j.electacta.2020.135957 ↗
25. The electronic structure, optical absorption and photocatalytic water splitting of (Fe + Ni)-codoped TiO2: a DFT +U study10.1016/j.ijhydene.2016.06.077 ↗
26. Bimetallic Ru–M/TiO2 (M = Fe, Ni, Cu, Co) nanocomposite catalysts facribated by galvanic replacement: structural elucidation and catalytic behavior in benzene selective hydrogenation10.1016/j.apsusc.2018.06.206 ↗
27. Development of new photocatalytic water splitting into H2 and O2 using two different semiconductor photocatalysts and a shuttle redox mediator IO3/I_10.1021/jp052848l ↗
28. Nanostructured Cu/TiO2 photocatalysts for H2 production from ethanol and glycerol aqueous solutions10.1002/cctc.201000289 ↗
29. Photocatalytic hydrogen production from water using N-doped Ba5Ta4O15 under solar irradiation10.1021/jp202783t ↗
30. Centi
31. Montini
32. Alex ignatiev 3-D porous nickel anode for low temperature thin solid oxide fuel cell applications10.1002/admt.201700098 ↗
33. Ebrahim · 2016
34. Acharya · J. Alloys Compd. · 2019 · 788 · 49510.1016/j.jallcom.2019.02.157 ↗
35. Wang · Dalton Trans. · 2016 · 45 · 1774810.1039/C6DT03449G ↗
36. Tauc · Phys. Status Solidi · 1966 · 15 · 62710.1002/pssb.19660150224 ↗
37. Design, fabrication, electro- and photoelectrochemical investigations of novel CoTiO3/CuBi2O4 heterojunction semiconductor: an efficient photocatalyst for the degradation of DR16 dye10.1016/j.mssp.2020.105055 ↗
38. The effects of the calcination temperature of SrTiO3 powder on photocatalytic activities10.1016/0021-9517(88)90088-7 ↗