journal article·2020-11

Synthesis, characterization, and gas sensing properties of Fe3O4/FeOOH nanocomposites for a mass-type gas sensor

Nguyen Thanh Vinh, Le Anh Tuan, Le Khanh Vinh, Nguyen Van Quy

Publisher page

Abstract

Abstract Fe3O4/FeOOH nanocomposites were synthesized by a simplistic precipitation method for high-performance gas sensing applications. A spray-coating method was used to deposit a sensitive film of Fe3O4/FeOOH nanocomposites on a quartz crystal microbalance (QCM). The structural and morphological characteristics were analyzed by using X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray spectrometry (EDS), Fourier transforms infrared (FTIR) spectroscopy, and a vibrating sample magnetometer (VSM). The average diameter and length of the FeOOH nanorods were 30 and 100 nm, respectively. The maximum saturation magnetization of the prepared Fe3O4/FeOOH nanocomposites obtained a value ~30 emu g−1. The QCM sensor based on the Fe3O4/FeOOH nanocomposites was measured with various concentrations of toxic gases (CO, NO2, SO2) at room temperature. The gas sensing results indicated that the developed sensor had a considerable potentiality to apply for toxic gas sensors with a high detection sensitivity, repeatability, and good stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Acoustic Wave Resonator Technologies · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Outdoor spatial distribution and indoor levels of NO2 and SO2 in a high environmental risk site of the South Italy10.1016/j.scitotenv.2018.08.159 ↗
2. Energy use, industrial soot and vehicle exhaust pollution—China's regional air pollution recognition, performance decomposition and governance10.1016/j.eneco.2019.07.002 ↗
3. Air pollution embodied in China's trade with the BR countries: transfer pattern and environmental implication
4. Smog induces oxidative stress and microbiota disruption10.1016/j.jfda.2017.02.003 ↗
5. Growth and physiological response of an endangered tree, Horsfieldia hainanensis merr., to simulated sulfuric and nitric acid rain in southern China10.1016/j.plaphy.2019.09.029 ↗
6. Enhancement of acetylene gas sensing properties for a ZnO-based gas sensor produced by plasma immersion ion implantation and deposition10.1016/j.mssp.2018.12.031 ↗
7. CO sensing characteristics of In-doped ZnO semiconductor nanoparticles
8. Carbon monoxide (CO) optical gas sensor based on ZnO thin films10.1016/j.snb.2017.05.064 ↗
9. Nano-porous aluminum oxide membrane as filtration interface for optical gas sensor packaging10.1016/j.mee.2018.06.013 ↗
10. Three-gas detection system with IR optical sensor based on NDIR technology10.1016/j.optlaseng.2015.05.007 ↗
11. Ultrasensitive NO gas sensor based on the graphene oxide-coated long-period fiber grating10.1021/acsami.9b14212 ↗
12. Development of MEMS MOS gas sensors with CMOS compatible PECVD inter-metal passivation10.1016/j.snb.2019.04.116 ↗
13. Design and applications of MEMS flow sensors: a review10.1016/j.sna.2019.06.020 ↗
14. Quartz crystal microbalance-coated cellulose acetate nanofibers overlaid with chitosan for detection of acetic anhydride vapor
15. Effect of Fe doping on the CO gas sensing of functional calixarene molecules measured with quartz crystal microbalance technique10.1016/j.snb.2015.04.004 ↗
16. High-performance formaldehyde adsorption on CuO-ZnO composite nanofiber coated QCM sensors10.1016/j.jallcom.2018.12.237 ↗
17. A QCM humidity sensor constructed by graphene quantum dots and chitosan composites10.1016/j.sna.2019.01.009 ↗
18. A humidity sensor based on quartz crystal microbalance using graphene oxide as a sensitive layer10.1016/j.vacuum.2016.10.017 ↗
19. Room temperature violate organic compound sensor based on functional multi-wall carbon nanotubes coated quartz crystal microbalance10.1166/sl.2015.3494 ↗
20. A vapor response mechanism study of surface-modified single-walled carbon nanotubes coated chemiresistors and quartz crystal microbalance sensor arrays10.1016/j.talanta.2014.08.027 ↗
21. Low-temperature and fast response H2S gas sensor using semiconducting chitosan film10.1016/j.snb.2017.06.103 ↗
22. Detection of heavy metal ions in aqueous solution by P(MBTVBC-co-VIM)-coated QCM sensor10.1016/j.snb.2011.03.023 ↗
23. Recent trends of ceramic humidity sensors development: a review10.1016/j.snb.2016.01.015 ↗
24. Ultrasensitive detection of methylmercaptan gas using layered manganese oxide nanosheets with a quartz crystal microbalance sensor10.1021/acs.analchem.7b02738 ↗
25. QCM chemical sensor based on ZnO colloid spheres for the alcohols10.1016/j.snb.2014.06.119 ↗
26. Cu(OH)2 nanowires-graphene oxide composites based QCM humidity sensor with fast-response for real-time respiration monitoring10.1016/j.snb.2019.127313 ↗
27. 27-Fabrication of a quartz crystal microbalance sensor based on graphene oxide-TiO2 composite for the detection of chemical vapors at room temperature10.1016/j.apsusc.2019.06.280 ↗
28. Investigation into the ring-substituted polyanilines and their application for the detection and adsorption of sulfur dioxide10.1016/j.snb.2017.04.057 ↗
29. Enhanced SO2 sensing characteristics of multi-wall carbon nanotubes based mass-type sensor using two-step purification process10.1016/j.sna.2019.06.046 ↗
30. A QCM-based NO2 gas detector using morpholine-functional cross-linked copolymer coatings10.1016/j.snb.2004.11.044 ↗
31. NO2 gas sorption studies of Ge33Se67 films using quartz crystal microbalance10.1016/j.matchemphys.2012.09.057 ↗
32. Effect of humidity on the CO gas sensing of ZnSn(OH)6 film via quartz crystal microbalance technique10.1016/j.jallcom.2015.10.149 ↗
33. CO gas sorption properties of ferrocene branched chitosan derivatives10.1016/j.snb.2016.08.175 ↗
34. Iron-nickel spinel oxide as an electrocatalyst for non-aqueous rechargeable lithium-oxygen batteries10.1016/j.jallcom.2016.01.131 ↗
35. Porous one-dimensional carbon/iron oxide composite for rechargeable lithium-ion batteries with high and stable capacity10.1016/j.jallcom.2016.02.160 ↗
36. Novel route for fabrication of nanostructured α-Fe2O3 gas sensor10.1016/j.mssp.2013.08.016 ↗
37. An acetone gas sensor based on nanosized Pt-loaded Fe2O3 nanocubes10.1016/j.snb.2019.03.082 ↗
38. Ultrafast response and recovery trimethylamine sensor based on a-Fe2O3 snowflake-like hierarchical architectures10.1016/j.jallcom.2017.05.227 ↗
39. Ultrasound assisted co-precipitation synthesis of Fe3O4/bentonite nanocomposite: performance for nitrate, BOD and COD water treatment10.1016/j.jwpe.2019.100870 ↗
40. 40-Preparation of magnetic core-shell Fe3O4@polyaniline composite material and its application in adsorption and removal of tetrabromobisphenol A and decabromodiphenyl ether, Ecotox10.1016/j.ecoenv.2019.109471 ↗
41. Bioinspired 2D-carbon flakes and Fe3O4 nanoparticles composite for arsenite removal10.1021/acsami.6b03583 ↗
42. The effect on ozone catalytic performance of prepared-FeOOH by different precursors10.1016/j.jenvman.2018.08.103 ↗
43. Chem. Water vapor interactions with FeOOH particle surfaces
44. Highly sensitive and selective LPG sensor based on -Fe2O3 nanorods10.1016/j.snb.2010.12.025 ↗
45. Effects of γ- Fe2O3 on γ- Fe2O3/Fe3O4 composite magnetic fluid by low-temperature low-vacuum oxidation method10.1016/j.matdes.2016.05.077 ↗
46. Structure and optical properties of Fe3O4 nanoparticles synthesized by coprecipitation method with different organic modifiers10.1016/j.matchar.2017.06.034 ↗
47. Interactions between phosphoric-tannic acid and different forms of FeOOH
48. Peroxymonosulfate activation for efficient sulfamethoxazole degradation by Fe3O4-β-FeOOH nanocomposites: coexistence of radical and non-radical reaction10.1016/j.cej.2018.09.064 ↗
49. Verwendung von schwingquarzen zur wagung diinner schichten und zur mikrowagung10.1007/BF01337937 ↗