High thermoelectric performance realized in porous Cu1.8S based composites by Na2S addition
Source abstract
Abstract
Abstract Digenite (Cu1.8S), one of superionic conductors, possesses the exceptional electrical transports performance but unsatisfactory thermal transport properties, which desiderates to be improved to become the candidate for use in the field of thermoelectric application. The porous Cu1.8S based composites with Na2S polycrystalline bulk samples were prepared via the incorporation of mechanical alloying (MA) and spark plasma sintering (SPS) technique by employing Na2S·9H2O as a addictive. The hydrate assists to create a porous structure and to refine grains during the fabrication procedure. Benefiting from the strengthened phonons scattering by additional multiscale pores after introducing Na2S, the thermal conductivity was dramatically decreased which results in an overall increased thermoelectric efficiency. The optimal thermoelectric figure of merit (ZT) of 0.78 at 773 K is obtained for Cu1.8S+2 wt % Na2S sample, which is 60% higher than that (0.49) of pristine Cu1.8S.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Thermoelectric cooling and power generation10.1126/science.285.5428.703 ↗
2. Advances in thermoelectric materials research: looking back and moving forward10.1126/science.aak9997 ↗
3. Recent developments in thermoelectric materials10.1179/095066003225010182 ↗
4. All-scale hierarchically structured p-type PbSe alloys with high thermoelectric performance enabled by improved band degeneracy10.1021/jacs.9b00967 ↗
5. Thermoelectric power generation: from new materials to devices
6. Alloying to increase the band gap for improving thermoelectric properties of Ag2Te10.1039/c1jm13888j ↗
7. Phonon scattering at grain boundaries in heavily doped fine-grained silicon–germanium alloys10.1038/290765a0 ↗
8. Point defect-assisted doping mechanism and related thermoelectric transport properties in Pb-doped BiCuOTe10.1039/C4TA04057K ↗
9. High performance Mg2(Si,Sn) solid solutions: a point defect chemistry approach to enhancing thermoelectric properties10.1002/adfm.201400123 ↗
10. Interstitial point defect scattering contributing to high thermoelectric performance in SnTe10.1002/aelm.201600019 ↗
11. Formation of Sb2Te3 widmansta in thermoelectric PbTe10.1016/j.actamat.2008.10.005 ↗
12. High thermoelectric performance in PbTe due to large nanoscale Ag2Te precipitates and La doping10.1002/adfm.201000878 ↗
13. Large thermoelectric figure of merit for three-dimensional topological Anderson insulators via line dislocation engineering10.1063/1.3481382 ↗
14. Boundary scattering and the thermoelectric figure of merit10.1002/1521-396X(200110)187:2<507::AID-PSSA507>3.0.CO;2-M ↗
15. Achieving ZT=2.2 with Bi-doped n-type SnSe single crystals10.1038/ncomms13713 ↗
16. SnSe: a remarkable new thermoelectric material10.1039/C6EE01755J ↗
17. Enhanced density-of-states effective mass and strained endotaxial nanostructures in Sb-doped Pb0.97Cd0.03Te thermoelectric alloys10.1021/acsami.8b21524 ↗
18. Enhancing thermoelectric performance of Bi2Te3-based nanostructures through rational structure design10.1039/C6NR00719H ↗
19. Graphene network in copper sulfide leading to enhanced thermoelectric properties and thermal stability10.1016/j.nanoen.2018.04.058 ↗
20. Thermoelectric properties of copper-deficient Cu2-xSe (0.05≤x≤0.25) binary compounds10.1016/j.ceramint.2017.05.161 ↗
21. High thermoelectric performance in non-toxic earth-abundant copper sulfide10.1002/adma.201400515 ↗
22. Enhancement of thermoelectric properties by atomic-scale percolation in digenite CuxS10.1039/C4TA01250J ↗
23. Crystal and electronic structures of CuxS solar cell absorbers10.1063/1.3682503 ↗
24. Thermoelectric properties of Ag-doped Cu2Se and Cu2Te10.1039/c3ta12508d ↗
25. Are binary copper sulfides/selenides really new and promising thermoelectric materials10.1002/aenm.201301581 ↗
26. Enhanced thermoelectric properties of Cu1.8S by Ti-doping induced secondary phase10.1016/j.jallcom.2017.09.305 ↗
27. Enhanced thermoelectric property in superionic conductor Bi-doped Cu1.8S10.1016/j.jallcom.2017.02.295 ↗
28. High-performance thermoelectricity in nanostructured earth-abundant copper sulfides bulk materials10.1002/aenm.201600607 ↗
29. Enhancing the thermoelectric performance of Cu1.8S by Sb/Sn co-doping and incorporating multiscale defects to scatter heat-carrying phonons10.1039/C9TC01096C ↗
30. Excellent ZT achieved in Cu1.8S thermoelectric alloys through introducing rare-earth trichlorides10.1039/C8TA03195A ↗
31. Size effect of SiO2 on enhancing thermoelectric properties of Cu1.8S10.1002/pssa.201330185 ↗
32. Enhanced thermoelectric properties of Cu1.8S via introducing Bi2S3 and Bi2S3@Bi core-shell nanorods10.1016/j.jallcom.2017.08.224 ↗
33. Enhanced thermoelectric properties of SiC nanoparticle dispersed Cu1.8S bulk materials10.1016/j.jallcom.2016.11.331 ↗
34. Colorimetric determination of sulfide in microsamples10.2116/analsci.32.1129 ↗
35. Low-cost, abundant binary sulfides as promising thermoelectric materials10.1016/j.mattod.2015.10.004 ↗
36. Synthesis and transport property of Cu1.8S as a promising thermoelectric compound10.1039/c1cc16368j ↗
37. Fabrication and properties of Bi2S3−xSex thermoelectric polycrystals10.1016/j.ssc.2013.03.013 ↗
38. Preparation of Ca3Co4O9 and improvement of its thermoelectric properties by spark plasma sintering10.1111/j.1551-2916.2005.00284.x ↗
39. Enhanced thermoelectric properties of Pb-doped BiCuSeO ceramics10.1002/adma.201301675 ↗
40. BiSbTe-based nanocomposites with high ZT: the effect of SiC nanodispersion on thermoelectric properties10.1002/adfm.201300146 ↗
41. Electronic and crystal structure of Cu2−xS: full-potential electronic structure calculations10.1103/PhysRevB.76.195202 ↗
42. Stability and electronic structures of CuxS solar cell absorbers
43. The “electron crystal” behavior in copper,chalcogenides Cu2X(X= Se, S)10.1039/C6TA10725G ↗
44. Optical properties of manganese-doped nanocrystals of AnS10.1103/PhysRevLett.72.416 ↗
45. Low effective mass leading to high thermoelectric performance10.1039/c2ee21536e ↗
46. Resonant carrier scattering by core-shell nanoparticles for thermoelectric power factor enhancement10.1063/1.3673615 ↗
47. Improved thermoelectric performance of silver nanoparticles-dispersed Bi2Te3 composites deriving from hierarchical two-phased heterostructure10.1002/adfm.201402663 ↗
48. Synthesis and transport properties of AgBi3S5 ternary sulfide compound
49. Phase transition and high temperature thermoelectric properties of copper selenide Cu2− xSe (0≤ x≤ 0.25)10.1088/1674-1056/20/8/087201 ↗
50. Power generation evaluated on a bismuth telluride unicouple module10.1007/s11664-014-3556-9 ↗
51. Size and porosity effects on thermal conductivity of nanoporous material with an extension to nanoporous particles embedded in a host matrix10.1016/j.physleta.2015.01.027 ↗