journal article·2024-01

Performance on lapping quartz glass by UV curing fixed abrasive pad with Gr2O3-diamond composite abrasives

Zhankui Wang, Pengzhan Wang, Fengsong Dong, Minghua Pang, Lijie Ma, Hongyuan Zhao, Jianxiu Su

Publisher page

Abstract

To enhance the material removal rate and surface quality of the quartz glass lapping process, a novel fixed composite abrasives (CA) processing method for quartz glass has been proposed. The method involves using CA grains (initial grain size 10 μm, secondary grain size 14 μm) and single crystal diamond (SCD) of the same grain size as abrasive materials, and preparing fixed abrasive pad (FAP) through UV curing technology. Lapping and friction wear experiments were conducted on quartz glass, with material removal rate (MRR), surface roughness Ra, and friction coefficient (FC) being used as evaluation criteria to compare the lapping performance of the three types of fixed abrasive pads. The results demonstrated that the fixed composite abrasive pad (FCAP) exhibited the highest MRR of 4.13 μm/min, the highest surface roughness Ra of quartz glass after lapping at 115.829 nm, and the highest FC of 0.0802. Following closely, the W14 single crystal diamond fixed abrasive pad (SCDFAP) showcased the second-highest MRR of 1.85 μm/min, the second-highest surface roughness Ra after lapping at 92.51 nm, and the second-highest FC of 0.0492. On the other hand, the W3.5SCDFAP reported the lowest MRR of 0.346 μm/min, the lowest surface roughness Ra after lapping at 36.439 nm, and the lowest FC of 0.0396. This comparison indicates that under the same particle size conditions (initial and secondary particle size), FCAP prepared with CA grains exhibits superior friction and wear performance. It can effectively enhance the MRR, enabling efficient processing of quartz glass.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Research on chemo-mechanical grinding of large size quartz glass substrate10.1016/j.precisioneng.2009.01.006 ↗
2. On the mechanism of material removal by fixed abrasive lapping of various glass substrates10.1016/j.wear.2012.11.024 ↗
3. Theoretical and experimental analysis of material removal and surface generation in novel fixed abrasive lapping of optical surface10.1016/j.jmatprotec.2019.116570 ↗
4. Effects of pressure and slurry on removal mechanism during the chemical mechanical polishing of quartz glass using ReaxFF MD
5. Fundamental performance of Magnetic Compound Fluid (MCF) wheel in ultra-fine surface finishing of optical glass10.1016/j.ijmachtools.2013.09.003 ↗
6. Review on the progress of ultra-precision machining technologies10.1007/s11465-017-0455-9 ↗
7. Design and optimization of ferric chloride and oxalic acid based slurry to chemically mechanically polish stainless steel
8. Analysis and improvement of the pad wear profile in fixed abrasive polishing10.1007/s00170-015-8025-y ↗
9. Effects of chemical slurries on fixed abrasive chemical-mechanical polishing of optical silicon substrates10.1007/s12541-013-0195-7 ↗
10. Effect of material structure on spinel machinability in its fixed abrasive lapping10.1016/j.jmapro.2021.05.035 ↗
11. Lapping performance of mixed-size agglomerated diamond abrasives in fixed abrasives pads
12. Surface morphology characterization of fixed abrasive lapping pad based on deep learning
13. Research progress of vitrified bond CBN grinding wheel
14. Wear evolution and stress distribution of single CBN superabrasive grain in high-speed grinding10.1016/j.precisioneng.2018.05.003 ↗
15. Effect of additive particles on the performance of ultraviolet-cured resin-bond grinding wheels fabricated using additive manufacturing technology10.1007/s00170-018-2231-3 ↗
16. Effect of lapping slurry on critical cutting depth of spinel10.1016/j.apsusc.2015.04.092 ↗
17. Effect of nanosized alumina fillers on manufacturing of UV light-curable-resin bond abrasive tool10.1080/10910344.2017.1283961 ↗
18. A novel UV-curable epoxy acrylate resin containing arylene ether sulfone linkages: preparation, characterization, and properties
19. Preparation of Ce-doped colloidal SiO2 composite abrasives and their chemical mechanical polishing behavior on sapphire substrates
20. Preparation of Ag2O modified silica abrasives and their chemical mechanical polishing performances on sapphire10.1007/s40544-017-0156-8 ↗
21. Evaluation of fixed abrasive diamond wire sawing induced subsurface damage of solar silicon wafers10.1016/j.jmatprotec.2019.116267 ↗
22. Novel photoelectrochemically combined mechanical polishing technology for scratch-free 4H-SiC surface by using CeO2-TiO2 composite photocatalysts and PS/CeO2 core/shell abrasives10.1016/j.apsusc.2021.151141 ↗
23. Preparation of the rod-shaped SiO2@C abrasive and effects of its microstructure on the polishing of zirconia ceramics10.1016/j.powtec.2021.09.070 ↗
24. Preparation of La-doped colloidal SiO2 composite abrasives and their chemical mechanical polishing behavior on sapphire substrates10.1016/j.precisioneng.2015.10.009 ↗
25. Core–shell structured polystyrene coated silica composite abrasives with homogeneous shells: the effects of polishing pressure and particle size on oxide-CMP10.1016/j.precisioneng.2015.06.011 ↗
26. Preparation of ellipsoidal rod-shaped silica nanocomposite abrasives by Chromium ion/PEG200 induced method for sapphire substrates chemical mechanical polishing10.1016/j.jallcom.2018.11.080 ↗
27. Machining stability research of soft-brittle crystals lapping by fixed-abrasive pad10.1080/10584587.2022.2074222 ↗
28. Fixed abrasive polishing: the effect of particle size on the workpiece roughness and sub-surface damage10.1007/s00170-021-07363-1 ↗
29. Comparison of lapping performance between diamond magnetic abrasives and silicon carbide magnetic abrasives
30. Effect of ethylenediamine on the surface glazed phenomenon of fixed abrasive pad under deionized water condition
31. Friction and wear characteristics of agglomerated diamond abrasives and lapping performance of fixed agglomerated diamond pads
32. Effect of process parameters on fixed abrasive pad self-conditioning in micro/nano machining10.1080/10584587.2017.1352387 ↗
33. A novel agglomerated diamond abrasive with excellent micro-cutting and self-sharpening capabilities in fixed abrasive lapping processes
34. Investigation on critical crack-free cutting depth for single crystal silicon slicing with fixed abrasive wire saw based on the scratching machining experiments10.1016/j.mssp.2017.10.027 ↗
35. Research on the bonding properties of vitrified bonds with porous diamonds and the grinding performance of porous diamond abrasive tools
36. Effect of Fe-based pre-alloyed powder on the microstructure and holding strength of impregnated diamond bit matrix10.1016/j.ijrmhm.2018.11.015 ↗
37. Study on the preparation of NiAl intermetallic-bonded diamond grinding block and grinding performance for sapphire
38. Effect of particle size on friction signal characters when lapping quartz glass with fixed abrasive pad10.1007/s00170-022-10589-2 ↗
39. Micro-scale contact behavior and its effect on the material removal process during chemical mechanical polishing10.1016/j.triboint.2020.106831 ↗
40. Friction characteristics analysis of symmetric aluminum alloy parts in warm forming process10.3390/sym14010166 ↗
41. Properties of grinding tool material for double-disc straight-groove grinding method based on friction and wear experiment10.1007/s00170-021-07016-3 ↗