journal article·2021-11

Designing and development of polyvinylpyrrolidone-tungsten trioxide (PVP-WO3) nanocomposite conducting film for highly sensitive, stable, and room temperature humidity sensing

Hizb Ullah Khan, Muhammad Tariq, Mutabar Shah, Sajid Ullah, Abdul Razaq Ahsan, Abdur Rahim, Jibran Iqbal, Renu Pasricha, Issam Ismail

Publisher page

Abstract

Abstract In the present research work, highly sensitive, stable, capacitive type humidity sensor based on polyvinylpyrrolidone and tungsten trioxide (PVP/WO3) nanocomposite was successfully developed. The sensing materials were prepared by using simple ultrasonication method and were characterized systematically through Fourier transform infrared spectroscopy, X-ray diffraction, high resolution transmission electron microscopy. Drop casting technique was used to develop sensing device using interdigitated copper electrode. Humidity sensing properties of PVP/WO3 nanocomposite sensors were investigated thoroughly and compared with pure PVP and WO3 sensors. It was observed that the humidity sensor with 20 wt% WO3 content showed high response of 44.73 nF/%RH, short response (10 s) and recovery time (15 s) as compared to pristine PVP and WO3 sensor. Low hysteresis value of 1.3 % was observed for PVP/WO3 20 wt% nanocomposite sensor along with excellent stability and repeatability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Chapter 1 - introduction
2. Carbon-nanotube /Polyvinyl alcohol coated thin core fiber sensor for humidity measurement10.1016/j.snb.2017.10.121 ↗
3. Fabrication and characterization of partially conjugated poly (vinyl alcohol) based resistive humidity sensor10.1016/j.sna.2020.112263 ↗
4. Humidity sensors based on polymer thin films10.1016/S0925-4005(96)02019-9 ↗
5. Capacitive type humidity sensor based on PANI decorated Cu–ZnS porous microspheres10.1016/j.talanta.2020.121361 ↗
6. A ZnO nanowire-based humidity sensor10.1016/j.spmi.2010.03.006 ↗
7. ZnO–TiO2 nanocomposite: characterization and moisture sensing studies10.1007/s12034-012-0290-x ↗
8. Photopatternable PEDOT:PSS/PEG hybrid thin film with moisture stability and sensitivity10.1038/micronano.2017.4 ↗
9. Graphene-based humidity sensors: the origin of alternating resistance change10.1088/1361-6528/aa7b6e ↗
10. Ultrahigh humidity sensitivity of graphene oxide10.1038/srep02714 ↗
11. Self-assembled growth of tandem nanostructures based on TiO2 mesoporous/ZnO nanowire arrays and their optoelectronic and photoluminescence properties10.1007/s00339-015-9030-6 ↗
12. Humidity sensing properties of ZnO nanoparticles synthesized by sol–gel process10.1016/j.snb.2009.11.051 ↗
13. All printed full range humidity sensor based on Fe2O310.1016/j.sna.2020.112072 ↗
14. Fabrication of a semi-transparent flexible humidity sensor using kinetically sprayed cupric oxide film10.1016/j.snb.2018.07.127 ↗
15. Photocatalytic activity and humidity sensor studies of magnetically reusable FeWO4 –WO3 composite nanoparticles10.1166/jnn.2019.15565 ↗
16. Humidity sensor based on synthesized pure WO3 and WO3-SnO2 nanocomposite
17. Maziarz
18. Characteristics of ZnO nanorods-based ammonia gas sensors with a cross-linked configuration10.1016/j.snb.2015.06.122 ↗
19. Ultrasensitive WO3 gas sensors for NO2 detection in air and low oxygen environment10.1016/j.snb.2016.08.080 ↗
20. CuO nanosheets for sensitive and selective determination of H2 S with high recovery ability10.1021/jp106098z ↗
21. Mesoporous NiO as an ultra-highly sensitive and selective gas sensor for sensing of trace ammonia at room temperature10.1016/j.jallcom.2019.03.143 ↗
22. Zhao · CrystEngComm · 2015 · 17 · 571010.1039/C5CE00870K ↗
23. NO2 sensing and selectivity characteristics of tungsten oxide thin films10.1016/j.snb.2014.09.082 ↗
24. Enhanced room-temperature ammonia-sensing properties of polyaniline-modified WO3 nanoplates derived via ultrasonic spray process10.1016/j.snb.2020.127892 ↗
25. Highly selective and sensitive response of Polypyrrole–MnO2 based composites towards ammonia gas10.1002/pc.24917 ↗
26. Low-temperature NO2 sensors based on polythiophene/WO3 organic-inorganic hybrids10.1016/S1003-6326(11)61187-4 ↗
27. The efficacy of polyvinylpyrrolidone (PVP)/CuO nanocomposite as an appropriate room temperature humidity sensing material: fabrication of highly sensitive capacitive resistive type humidity sensor10.1007/s10854-020-03305-x ↗
28. Polyimide-based capacitive humidity sensor10.3390/s18051516 ↗
29. Photo-crosslinked thiol-ene based hybrid polymeric sensor for humidity detection10.1016/j.reactfunctpolym.2017.03.002 ↗
30. Inquest of highly sensitive, selective and stable ammonia (NH3) gas sensor: structural, morphological and gas sensing properties of polyvinylpyrrolidone (PVP)/CuO nanocomposite10.1016/j.synthmet.2020.116482 ↗
31. Highly selective and sensitive room temperature NO2 gas sensor based on polypyrrole thin films10.1016/j.synthmet.2014.01.002 ↗
32. Navale · RSC Adv. · 2015
33. Highly selective and sensitive ammonia sensor using polypyrrole/V2O5 composites10.1007/s10854-017-7235-5 ↗
34. Polypyrrole/MnO2 composites: synthesis, structural and electrical properties10.1007/s10854-018-8936-0 ↗
35. Fabrication of methane gas sensor by layer-by-layer self-assembly of polyaniline/PdO ultra thin films on quartz crystal microbalance10.1016/j.snb.2009.12.035 ↗
36. Ultrahigh performance humidity sensor based on layer-by-layer self-assembly of graphene oxide /polyelectrolyte nanocomposite film10.1016/j.snb.2014.06.116 ↗
37. Gas sensors based on MWCNTs-PVP composite films for 1,2-dichloroethane vapor detection10.1007/s10854-014-2277-4 ↗
38. Development of electrospun PVdF-PAN membrane-based polymer electrolytes for lithium batteries10.1016/j.memsci.2008.08.047 ↗
39. Stable and fast-response capacitive humidity sensors based on a ZnO nanopowder/PVP-RGO multilayer
40. Synthesis and characterization of CuO nanosheets in polyvinylpyrrolidone by quick precipitation method10.1166/asem.2013.1227 ↗
41. The use of poly(amide-imide)/CuO as a filler for the preparation of poly(vinyl pyrrolidone) nanocomposites: thermal and morphological studies10.1177/0021998315589772 ↗
42. Polyvinylpyrrolidone (PVP) in nanoparticle synthesis10.1039/C5DT02964C ↗
43. Hybrid polyaniline-WO3 flexible sensor: a room temperature competence towards NH3 gas10.1016/j.snb.2019.02.094 ↗
44. Hydrogen bonding directed co-assembly of polyoxometalates and polymers to core-shell nanoparticles10.1039/C8QM00291F ↗
45. Hybrid polyaniline-WO3 flexible sensor: a room temperature competence towards NH3 gas10.1016/j.snb.2019.02.094 ↗
46. Fabrication of polyaniline (PANI)—tungsten oxide (WO3) composite for humidity sensing application10.1007/s10904-016-0412-9 ↗
47. Capacitive and resistive response of humidity sensors based on graphene decorated by PMMA and silver nanoparticles10.1016/j.snb.2018.03.069 ↗
48. Design and development for capacitive humidity sensor applications of lead-free Ca, Mg, Fe, Ti-oxides-based electro-ceramics with improved sensing properties via physisorption
49. Resistive and capacitive response of nitrogen-doped TiO2 nanotubes film humidity sensor
50. Study on dielectric properties of humidity sensing nanometer materials10.1016/j.snb.2004.11.089 ↗
51. Investigation of room temperature humidity sensing performance of mesoporous CuO particles10.1016/j.mssp.2020.105021 ↗
52. Super-fast response humidity sensor based on La0.7Sr0.3MnO3 nanocrystals prepared by PVP-assisted sol-gel method10.1016/j.snb.2017.11.169 ↗
53. Humidity sensing properties of mesoporous iron oxide/silica composite prepared via hydrothermal process10.1016/j.snb.2011.07.057 ↗
54. A high-performance flexible gas sensor based on self-assembled PANI-CeO2 nanocomposite thin film for trace-level NH3 detection at room temperature10.1016/j.snb.2017.12.022 ↗
55. Highly sensitive humidity sensor based on quartz crystal microbalance coated with ZnO colloid spheres10.1016/j.snb.2012.12.033 ↗
56. Electrical and humidity-sensing properties of reduced graphene oxide thin film fabricated by layer-by-layer with covalent anchoring on flexible substrate10.1016/j.snb.2014.04.035 ↗
57. Nano titania loaded mesoporous silica: preparation and application as high performance humidity sensor10.1016/j.snb.2015.05.072 ↗
58. Humidity-dependent characteristics of methyl-red thin film-based Ag/methyl-red/Ag surface-type cell10.1016/j.physe.2008.05.018 ↗
59. Excellent humidity sensing properties of cadmium titanate nanofibers10.1016/j.ceramint.2012.06.048 ↗
60. Fully integrated wearable humidity sensor based on hydrothermally synthesized partially reduced graphene oxide10.1016/j.sna.2018.06.052 ↗
61. Facile fabrication of laser-scribed-graphene humidity sensors by a commercial DVD drive10.1016/j.snb.2020.128483 ↗
62. A humidity sensing organic-inorganic composite for environmental monitoring10.3390/s130303615 ↗
63. A nanowire WO3 humidity sensor integrated with micro-heater and inverting amplifier circuit on chip manufactured using CMOS-MEMS technique10.1016/j.snb.2006.10.055 ↗
64. Facile and one step synthesis of WO3 nanorods and nanosheets as an efficient photocatalyst and humidity sensing material10.1016/j.vacuum.2018.06.021 ↗
65. Humidity sensor based on synthesized WO3–SnO2 nanocomposites10.1166/eef.2013.1038 ↗
66. Electrical and humidity sensing properties of polyaniline/WO3 composites10.1016/j.snb.2005.06.057 ↗
67. Effect of adding Au nanoparticles and KOH on the electrical and humidity-sensing properties of WO3 particles10.1016/j.snb.2017.06.094 ↗