Synergistic effect of 1,2,4-triazole and phytic acid as inhibitors on copper film CMP for ruthenium - based copper interconnected and the surface action mechanism analysis
Source abstract
Abstract
Ruthenium (Ru) has been selected as the next-generation barrier material for copper (Cu) interconnects due to its excellent electrical properties, high breakdown voltage, low leakage current, low resistivity and while improving the electromigration resistance of Cu interconnects. However, during the one-step chemical mechanical polishing (CMP) of Cu film, high removal rate of Cu and close to zero removal rate of Ru are required, which brings great difficulty to realize Cu film planarization. Inhibitors play a crucial role in controlling Cu and Ru removal rate and inhibiting the surface corrosion during the Cu films CMP. In this study, phytic acid as a green corrosion inhibitor was introduced in the Cu slurry and compared with 1,2,4-triazole (TAZ) as traditional inhibitor. From removal rate, static etch rate, surface quality and inhibition efficiency, it revealed that the corrosion inhibition of Cu and Ru by phytic acid was stronger than that of TAZ, while the obtained surface quality was weaker than that of TAZ. Through the analysis of UV–Visble spectroscopy and adsorption isotherm calculation, it revealed that the physical-chemical adsorption of both, which favored physical adsorption, existed on the Cu surface caused by weak van der Waals`s forces. Therefore, in order to obtain dual physical-chemical adsorption and improve the passivation performance and inhibition efficiency, the mixture of both was adopted. The inhibition efficiency of Cu and Ru was increased to 53.7% and 66.4% compared with phytic acid alone, respectively. The static etch rate of Cu was dropped by 200 Å/min. The surface quality was significantly improved, and the roughness dropped to 1.64 nm. Through X-ray photoelectron spectroscopy analysis, it was showed that Cu-TAZ and Cu-phytic acid generated by the mixed inhibitor and Cu formed a double-layer physical-chemical adsorption film on the surface, which increased the coverage of adsorption sites and improved the inhibition efficiency. Finally, the stability test shows that the slurry can be stable for at least 7 days, which has theoretical guiding significance for the research and development of low-node Cu film slurry.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Copper Interconnects and Reliability · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Investigation on the controllable growth of monodisperse silica colloid abrasives for the chemical mechanical polishing application10.1016/j.mee.2009.10.005 ↗
2. Synergy between dodecylbenzenesulfonic acid and isomeric alcohol polyoxyethylene ether for nano-scale scratch reduction in copper chemical mechanical polishing10.1016/j.triboint.2020.106576 ↗
3. Effects of polishing parameters on evolution of different wafer patterns during Cu CMP10.1109/TSM.2014.2387211 ↗
4. Nd3+-doped colloidal SiO2 composite abrasives: synthesis and the effects on chemical mechanical polishing (CMP) performances of sapphire wafers10.1016/j.apsusc.2017.03.270 ↗
5. Review of technology for 157 nm lithography10.1147/rd.455.0605 ↗
6. Eddy current measurement of the thickness of top Cu film of the multilayer interconnects in the integrated circuit (IC) manufacturing process10.1007/s11465-015-0325-2 ↗
7. Correlation analysis between pattern and non-pattern wafer for characterization of shallow trench isolation-chemical mechanical polishing (STI–CMP) process10.1016/S0167-9317(01)00694-3 ↗
8. Chemical mechanical planarization for microelectronics applications10.1016/j.mser.2004.06.002 ↗
9. Potassium tartrate as a complexing agent for chemical mechanical polishing of Cu/Co/TaN barrier liner stack in H2O2 based alkaline slurries10.1016/j.mssp.2019.104883 ↗
10. Research on Si (100) crystal substrate CMP based on FA/O alkaline slurry10.1016/j.apsusc.2017.05.128 ↗
11. Environment friendly chemical mechanical polishing of copper10.1016/j.susc.2017.09.005 ↗
12. The synergistic inhibitory effect and density functional theory study of 2,2 ’-[[(Methyl-1H-benzotriazol-1-yl)methyl]imino] bisethanol and potassium oleate on copper in H2O2 based alkaline slurries10.1016/j.colsurfa.2020.125275 ↗
13. Roles and mechanistic analysis of adenine as a green inhibitor in chemical mechanical polishing
14. Synergetic effect of 5-methyl-1H-benzotriazole and sodium dodecyl benzene sulfonate on CMP performance of ruthenium barrier layer in KIO4-based slurry
15. Investigation on inhibition of ruthenium corrosion by glycine in alkaline sodium hypochlorite based solution10.1016/j.apsusc.2019.144976 ↗
16. Controlling the removal rate selectivity of ruthenium to copper during CMP by using guanidine carbonate and 1, 2, 4-triazole
17. Surface characteristics of ruthenium in periodate-based slurry during chemical mechanical polishing10.1016/j.apsusc.2015.05.150 ↗
18. Effect of UV radiation on oxidation for Ru CMP
19. Surface corrosion inhibition mechanism of sarcosine as a green novel inhibitor on a novel barrier layer material of cobalt in copper film CMP for GLSI
20. Potassium sorbate as an inhibitor in copper chemical mechanical planarization slurry10.1016/j.electacta.2009.12.088 ↗
21. Potassium sorbate as an inhibitor in copper chemical mechanical planarization slurries10.1016/j.electacta.2009.10.086 ↗
22. Integrated electrochemical analysis of polyvinyl pyrrolidone (PVP) as the inhibitor for copper chemical mechanical planarization (Cu-CMP)10.1016/j.jallcom.2018.08.101 ↗
23. Study on the film forming mechanism, corrosion inhibition effect and synergistic action of two different inhibitors on copper surface chemical mechanical polishing for GLSI10.1016/j.apsusc.2019.144507 ↗
24. Synergistic roles of dodecyl sulfate and benzotriazole in enhancing the efficiency of CMP of copper
25. Micro-galvanic corrosion of Cu/Ru couple in potassium periodate (KIO4) solution10.1016/j.corsci.2018.03.045 ↗
26. Synergetic effect of potassium molybdate and benzotriazole on the CMP of ruthenium and copper in KIO4-based slurry10.1016/j.apsusc.2014.09.062 ↗
27. Roles and mechanism analysis of chitosan as a green additive in low-tech node copper film chemical mechanical polishing10.1016/j.colsurfa.2019.124293 ↗
28. Surface action mechanism and planarization effect of sarcosine as an auxiliary complexing agent in copper film chemical mechanical polishing10.1016/j.apsusc.2020.147109 ↗
29. Environmentally clean slurry using nano-TiO2-abrasive mixed with oxidizer H2O2 for ruthenium-film chemical mechanical planarization10.1016/j.apsusc.2013.06.068 ↗
30. Inhibition effect of glycine on molybdenum corrosion during CMP in alkaline H2O2 based abrasive free slurry10.1016/j.apsusc.2017.08.140 ↗
31. Effects of KIO4 concentration and pH values of the solution relevant for chemical mechanical polishing of ruthenium10.1016/j.mee.2015.12.003 ↗
32. The effect of pH on sapphire chemical mechanical polishing10.1149/2.0241503jss ↗
33. Synergistic effect of Glycine and BTA on step height reduction efficiency after copper CMP in weakly alkaline slurry
34. Effect of pH on CMP of copper and tantalum10.1149/1.1792871 ↗
35. Synergistic action mechanism and effect of ammonium dodecyl sulfate and 1,2,4-triazole in alkaline slurry on step height reduction for Cu CMP
36. Study on the weakly alkaline slurry of copper chemical mechanical planarization for GLSI
37. Chemical mechanical planarization of barrier layers by using a weakly alkaline slurry10.1016/j.mee.2013.04.001 ↗
38. Chemical interactions and mechanisms of different pH regulators on copper and cobalt removal rate of copper film CMP for GLSI
39. Influence of pH on the synthesis and properties of polypyrrole on copper from phytic acid solution for corrosion protection10.1016/j.porgcoat.2014.01.002 ↗
40. Study on the adsorption and inhibition mechanism of 1,2,4-triazole on copper surface in copper interconnection CMP
41. Corrosion control of copper wiring by barrier CMP slurry containing azole inhibitor: combination of simulation and experiment10.1016/j.colsurfa.2020.124872 ↗
42. Effect of EDTA-based alkaline cleaning solution on TAZ removal in post CMP cleaning of copper interconnection10.1016/j.materresbull.2020.111202 ↗
43. Role of the functional groups of complexing agents in copper slurries10.1149/1.2199307 ↗
44. Effect of ethylenediamine on CMP performance of ruthenium in H2O2-based slurries10.1039/D1RA08243D ↗
45. Role of guanidine carbonate and crystal orientation on chemical mechanical polishing of ruthenium films
46. Investigation of guanidine carbonate-based slurries for chemical mechanical polishing of Ru/TiN barrier films with minimal corrosion
47. Effect of guanidinium ions on ruthenium CMP in H2O2-based slurry
48. Controlling the removal rate selectivity of ruthenium to copper during CMP by using guanidine carbonate and 1, 2, 4-triazole
49. Effect of ionic strength on ruthenium CMP in H2O2-based slurries10.1016/j.apsusc.2014.08.063 ↗
50. An optimized passivation mechanism at the copper film recess for achieving efficient planarization of copper chemical mechanical polishing10.1016/j.mssp.2021.106321 ↗
51. Inhibition effect of TT-LYK on Cu corrosion and galvanic corrosion between Cu and Co during CMP in alkaline slurry
52. Electrochemical synthesis of polypyrrole films on copper from phytic solution for corrosion protection10.1016/j.corsci.2013.07.003 ↗
53. Modelling of pitting corrosion in marine and offshore steel structures- A technical review10.1016/j.jlp.2015.06.008 ↗
54. Landolt · 2007 · 312
55. Surface measurement of GLSI wafer with copper interconnects after CMP
56. Effects of the functional groups of complexing agents and Cu oxide formation on Cu dissolution behaviors in Cu CMP process10.1149/1.3522811 ↗
57. 1,2,4-Triazole as a corrosion inhibitor in copper chemical mechanical polishing, Thin10.1016/j.tsf.2013.12.047 ↗
58. Synergetic effect of H2O2 and glycine on cobalt CMP in weakly alkaline slurry10.1016/j.mee.2014.02.002 ↗
59. Functions of Trilon (R) P as a polyamine in copper chemical mechanical polishing10.1016/j.apsusc.2013.10.020 ↗
60. The role of carboxylic acids on nanoparticle removal in post CMP cleaning process for cobalt interconnects10.1016/j.matchemphys.2021.125199 ↗