Shape modulation due to sub-surface damage difference on N-type 4H–SiC wafer during lapping and polishing
Source abstract
Abstract
The technology enhancement of obtaining 4H–SiC wafers with a concave Si face shape has improved the performance of GaN-on-SiC. For manufacturers, the wafer shape has a tremendous impact on the deposited films quality by increasing defects generation or causing undesirable strain. Therefore, it is crucial to control the wafer shape and explore the mechanism. This study recorded the wafer shape evolution by flatness tester during the machining process of lapping, mechanical polishing (MP), and chemical mechanical polishing (CMP). The varying shapes of SiC wafers are due to surface damage and intrinsic stress caused by the early lapping process, but the intrinsic stress is dominant. The measurement results show that double side MP and single side CMP make the wafer more convex and concave. It indicates that the residual surface stress is involved in shape formation. Perfect symmetrical shape between (0001) Si face and (000 1 ‾ ) C face suggests that there is indeed bending stress within the wafer. In this study, atomic force microscopy (AFM), high-resolution X-ray diffractometry (HRXRD), and scanning electron microscopy (SEM) was used to investigate the surface damage between SiC polar faces. According to the results, the damage to the Si face is more severe than that to the C face after double-sided mechanical polishing, leading to the wafer becoming more convex.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Silicon Carbide Semiconductor Technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. SiC vs. Si - evaluation of potentials for performance improvement of power electronics converter systems by SiC power semiconductors10.4028/www.scientific.net/MSF.645-648.1101 ↗
2. Development of SiC super-junction (SJ) devices by multi-epitaxial growth10.4028/www.scientific.net/MSF.778-780.845 ↗
3. Passive high power RF comb filters using epitaxial GaN/NbN/SiC HBARs
4. Portable DC supply based on SiC power devices for high-voltage marx generator
5. Cheng · 2014
6. Cho · 2018
7. Raman intensity profiles and the stacking structure in SiC polytypes10.1016/0038-1098(91)90590-R ↗
8. A study on the effect of ion implant to wafer shape and the ion implanter to process the distorted thin SiC wafer
9. Warping of silicon wafers subjected to back-grinding process10.1016/j.precisioneng.2014.10.009 ↗
10. Evolution of mechanically formed bow due to surface waviness and residual stress difference on sapphire (0001) substrate10.1016/j.jmatprotec.2019.02.003 ↗
11. Origin of the warpage of 3C-SiC wafer: effect of nonuniform intrinsic stress10.4028/b-qO0A2J ↗
12. Optimization of 150 mm 4H SiC substrate crystal quality10.4028/www.scientific.net/MSF.924.11 ↗
13. Reducing stress in silicon carbide epitaxial layers10.1016/S0022-0248(03)00938-2 ↗
14. Yu · 2017
15. Basal plane bending of 4H-SiC single crystals grown by sublimation method with different seed attachment methods10.1039/C8CE00910D ↗
16. Moeggenborg · 2015 · 545
17. Qiusheng · 2015
18. The double-side lapping of SiC wafers with semifixed abrasives and resin–combined plates
19. The effect of doping on the hardness of silicon carbide single crystal and its first principles calculations
20. Cross-sectional microscopy detection technology for subsurface damage of fixed abrasive lapped SiC wafers
21. Effect of annealing temperature on SiC wafer bow and Warp". SILICON CARBIDE 2008 - materials
22. Investigation of heavily nitrogen-doped n+ 4H–SiC crystals grown by physical vapor transport10.1016/j.jcrysgro.2009.01.119 ↗
23. Damage-free and atomically-flat finishing of single crystal SiC by combination of oxidation and soft abrasive polishing10.1016/j.procir.2014.04.035 ↗
24. Relationship between basal plane dislocation distribution and local basal plane bending in PVT-grown 4H-SiC crystals10.1007/s11664-019-07937-6 ↗
25. The effect of surface polarity on the CMP behavior of 6H-SiC substrates10.1134/S1070427220060099 ↗