journal article·2021-11

Surface residual stress in amorphous SiO2 insulating layer on Si substrate near a Cu through-silicon via (TSV) investigated by nanoindentation

Hangeul Kim, Hansol Jeon, Dong-Ju Lee, Ju-Young Kim

Publisher page

Abstract

Abstract Thermomechanical reliability remains challenging in through-silicon via (TSV) manufacture, a key technology in three-dimensional packaging of integrated circuits. A primary issue in reliability is the residual stress created during manufacture and operation by mismatch in thermal expansion coefficients of Cu, the TSV filling material, with surrounding materials. Nanoindentation is suggested as a tool to measure the distribution of residual stress in the amorphous top layer near Cu TSVs. Formation of Cu TSV generates the tensile residual stress in the vicinity of the TSVs, and the maximum residual stress in top SiO2 insulating layer is 322 MPa. The residual stress increases as 652 MPa by post-heat treatments, and increases as 390 MPa for higer current density of TSVs electroplating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. 3-D hyperintegration and packaging technologies for micro-nano systems10.1109/JPROC.2008.2007458 ↗
2. Through-silicon via (TSV)10.1109/JPROC.2008.2007462 ↗
3. Three dimensional silicon integration10.1147/JRD.2008.5388564 ↗
4. Overview and outlook of through‐silicon via (TSV) and 3D integrations10.1108/13565361111127304 ↗
5. Influence of interfacial intermetallic compound on fracture behavior of solder joints10.1016/S0921-5093(03)00277-6 ↗
6. High-frequency scalable electrical model and analysis of a through silicon via (TSV)
7. Process integration for through-silicon vias10.1116/1.1864012 ↗
8. Reliability of TSV interconnects: electromigration, thermal cycling, and impact on above metal level dielectric10.1016/j.microrel.2012.06.021 ↗
9. Recent advances on electromigration in very-large-scale-integration of interconnects10.1063/1.1611263 ↗
10. A detailed failure analysis examination of the effect of thermal cycling on Cu TSV reliability10.1109/TED.2013.2291297 ↗
11. Impact of the electrodeposition chemistry used for TSV filling on the microstructural and thermo-mechanical response of Cu10.1007/s10853-011-5308-z ↗
12. Study on copper protrusion of through-silicon via in a 3-D integrated circuit10.1016/j.msea.2019.03.130 ↗
13. Impact of near-surface thermal stresses on interfacial reliability of through-silicon vias for 3-D interconnects10.1109/TDMR.2010.2068572 ↗
14. Plasticity mechanism for copper extrusion in through-silicon vias for three-dimensional interconnects10.1063/1.4833020 ↗
15. Effect of thermal stresses on carrier mobility and keep-out zone around through-silicon vias for 3-D integration10.1109/TDMR.2012.2194784 ↗
16. Measurement of stresses in Cu and Si around through-silicon via by synchrotron X-ray microdiffraction for 3-dimensional integrated circuits10.1016/j.microrel.2011.10.016 ↗
17. Synchrotron X-ray microdiffraction investigation of scaling effects on reliability for through-silicon vias for 3-D integration10.1109/TDMR.2019.2933794 ↗
18. Non-destructive micro-Raman analysis of Si near Cu through silicon via10.1007/s13391-017-6349-5 ↗
19. Thermo-mechanical characterization of copper through-silicon vias (Cu-TSVs) using micro-Raman spectroscopy and atomic force microscopy10.1016/j.mee.2015.02.004 ↗
20. Measurement and analysis of thermal stresses in 3D integrated structures containing through-silicon-vias10.1016/j.microrel.2012.05.008 ↗
21. Micro-Raman spectroscopy and analysis of near-surface stresses in silicon around through-silicon vias for three-dimensional interconnects10.1063/1.3696980 ↗
22. Cu pumping in TSVs: effect of pre-CMP thermal budget10.1016/j.microrel.2011.06.003 ↗
23. Thin film stress measurement by instrumented optical fibre displacement sensor10.1016/j.apsusc.2006.09.051 ↗
24. Dependence of stresses on grain orientations in thin polycrystalline films on substrates: an explanation of the relationship between preferred orientations and stresses10.1016/S0169-4332(01)00243-4 ↗
25. Residual stresses in evaporated silicon dioxide thin films: correlation with deposition parameters and aging behavior10.1063/1.360290 ↗
26. On the determination of residual stress and mechanical properties by indentation10.1016/j.msea.2005.10.034 ↗
27. Influences of stress on the measurement of mechanical properties using nanoindentation: Part I. Experimental studies in an aluminum alloy10.1557/JMR.1996.0091 ↗
28. Residual stresses in DLC/Si and Au/Si systems: application of a stress-relaxation model to the nanoindentation technique10.1557/JMR.2002.0131 ↗
29. Quantitative analysis of strengthening mechanisms in thin Cu films: effects of film thickness, grain size, and passivation10.1557/JMR.1998.0186 ↗
30. Influences of stress on the measurement of mechanical properties using nanoindentation: Part II. Finite element simulations10.1557/JMR.1996.0092 ↗
31. Measurement of residual-stress effect by nanoindentation on elastically strained (100) W10.1016/S1359-6462(03)00290-2 ↗
32. Determination of uniaxial residual stress and mechanical properties by instrumented indentation10.1016/j.actamat.2006.02.026 ↗
33. Measurement of residual stress by load and depth sensing indentation with spherical indenters10.1557/JMR.2001.0286 ↗
34. Effect of residual stresses on the hardness of bulk metallic glasses10.1016/j.actamat.2011.01.025 ↗
35. Influence of annealing conditions on the mechanical and microstructural behavior of electroplated Cu-TSV10.1088/0960-1317/20/4/045032 ↗
36. Elastic anisotropy of Cu and its impact on stress management for 3D IC: nanoindentation and TCAD simulation study10.1557/jmr.2011.323 ↗
37. Fracture toughness, adhesion and mechanical properties of low-K dielectric thin films measured by nanoindentation10.1016/S0040-6090(03)00406-1 ↗
38. An Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
39. Isothermal stress relaxation in electroplated Cu films. I. Mass transport measurements10.1063/1.1904720 ↗
40. Kinetic model for dependence of thin film stress on growth rate, temperature, and microstructure10.1063/1.4704683 ↗
41. Origin of compressive residual stress in polycrystalline thin films10.1103/PhysRevLett.88.156103 ↗
42. Modeling copper plastic deformation and liner viscoelastic flow effects on performance and reliability in through silicon via (TSV) fabrication processes10.1109/TDMR.2019.2940718 ↗
43. Constrained diffusional creep in UHV-produced copper thin films10.1016/S1359-6454(01)00168-9 ↗
44. Stress development and relaxation in copper films during thermal cycling10.1557/JMR.1993.1845 ↗
45. Isothermal stress relaxation in electroplated Cu films. II. Kinetic modeling10.1063/1.1904721 ↗
46. Microstructure evolution in copper under severe plastic deformation detected by in situ X-ray diffraction using monochromatic synchrotron light10.1016/j.msea.2008.11.023 ↗
47. Effect of passivation on stress relaxation in electroplated copper films10.1557/jmr.2006.0196 ↗
48. Evaluation of tensile stress-strain curve of electroplated copper film by characterizing indentation size effect with a single nanoindentation10.1007/s12540-017-6461-y ↗
49. Effects of internal stresses on the mechanical properties of deposition thin films10.1016/j.jmatprotec.2007.11.258 ↗