journal article·2021-01

Morphology and phase-controlled growth of CuInS2 nanoparticles through polyol based heating up synthesis approach

Maryam Heidariramsheh, Mohammad Mahdi Dabbagh, Seyed Mohammad Mahdavi, Ali Beitollahi

Publisher page

Abstract

Abstract The properties of colloidal nanoparticles are the key parameters in the fabrication of inexpensive solar cells based on the solution methods. In this study, Different nanostructures of CuInS2 (CIS) were successfully synthesized by a heating-up facile polyol-based method in which, polyols including diethylene glycol (DEG), ethylene glycol (EG), and glycerol (Gly) were chosen as both the solvent and the reductant. It is found that not only the indium precursor type but also the polyol solvent are greatly effective on the size, morphology and crystal phase of this sulfide ternary composition. Briefly, the heating-up synthesis using In(acac)3 in DEG and Gly media, created nano-sized particles that arranged in a wurtzite crystalline structure. Resulted CIS particles from other indium salts are not suitable for making nanoparticle-based inks, since the micron-sized agglomerated particles are obtained which lack proper dispersion behavior for making inks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (82)

Show source-provided references
1. Antonio Luque · 2011
2. Grätzel
3. Monodispersed wurtzite Cu2 SnS3 nanocrystals by phosphine and oleylamine free facile heat-up technique10.1039/C6CE00296J ↗
4. Controlled synthesis of CuInS2, Cu2SnS3 and Cu2ZnSnS4 nano-structures: insight into the universal phase-selectivity mechanism10.1039/c3ce40284c ↗
5. Trigonal Cu2-II-Sn-VI4 (II = Ba, Sr and VI = S, Se) quaternary compounds for earth-abundant photovoltaics10.1039/C5CP06977G ↗
6. Facile synthesis of composition and morphology modulated quaternary CuZnFeS colloidal nanocrystals for photovoltaic application10.1039/C5RA18157G ↗
7. Bernechea · 2016 · 1
8. Copper indium gallium selenide based solar cells – a review10.1039/C7EE00826K ↗
9. Synthesis and characterization of photoelectrochemical and photovoltaic Cu 2 BaSnS 4 thin films and solar cells10.1039/C7TC01678F ↗
10. Hierarchical CuInS2 synthesized with the induction of histidine for polymer/CuInS2 solar cells10.1016/j.mssp.2017.12.009 ↗
11. Selective synthesis of cubic and hexagonal phase of CuInS 2 nanocrystals by microwave irradiation10.1039/C3RA45486J ↗
12. Wurtzite CuInS2: solution based one pot direct synthesis and its doping studies with non-magnetic Ga3+ and magnetic Fe3+ ions10.1039/c3ra41698d ↗
13. Spinel indium sulfide precursor for the phase-selective synthesis of Cu-In-S nanocrystals with zinc-blende, wurtzite, and spinel structures10.1021/cm400848f ↗
14. Low-cost inorganic solar cells: from ink to printed device10.1021/cr100191d ↗
15. Quaternary CuIn ( S 1-x Se x ) 2 Nanocrystals : facile heating- up synthesis , band gap tuning , and gram-scale production10.1021/jp1090735 ↗
16. Towards low-cost, environmentally friendly printed chalcopyrite and kesterite solar cells10.1039/C3EE43865A ↗
17. Synthesis of CuInS2nanoparticles via simple microwave approach and investigation of their behavior in solar cell10.1016/j.mssp.2012.12.011 ↗
18. Investigation of CuInS2 thin films deposited on FTO by one-pot solvothermal synthesis10.1016/j.mssp.2015.03.054 ↗
19. Solvothermal synthesis of zincblende and wurtzite CuInS2 nanocrystals and their photovoltaic application10.1021/la300742p ↗
20. A solvothermal approach for the size-, shape- and phase-controlled synthesis and properties of CuInS210.1016/j.matchemphys.2013.12.023 ↗
21. Hydrothermal synthesis of chalcopyrite CuInS2, CuInSe2and CuInTe2nanocubes and their characterization10.1016/j.cap.2014.08.011 ↗
22. Scalable synthesis of CuInS 2 nanocrystal inks for photovoltaic applications10.1039/C4TA05696E ↗
23. Noninjection gram-scale synthesis of of monodisperse pyramidal CuInS2 nanocrystals and their size-dependent properties10.1021/nn1015538 ↗
24. Controlled synthesis and optical properties of colloidal ternary chalcogenide CuInS2 nanocrystals10.1021/cm8006827 ↗
25. Structural and optical properties of Fe and Zn substituted CuInS2 nanoparticles synthesized by a one-pot facile method10.1039/C4TC02516D ↗
26. Polyol-mediated synthesis of porous nanocrystalline CuInS2 foam10.1016/S0022-0248(03)01142-4 ↗
27. Polylol-solution synthesis of CuInSe2 nanoparticles ink for scalable solution-based thin film photovoltaic cells10.1080/00150193.2017.1390991 ↗
28. Characterization of CBD deposited CuInSe2 thin film10.1016/j.mssp.2017.11.008 ↗
29. Preparation of precursor particles by cryogenic mechanical milling for the deposition of CuInS2 thin films10.1016/j.mssp.2012.08.012 ↗
30. Microwave-assisted polyol synthesis of CuInTe2 and CuInSe2 nanoparticles10.1021/ic0342853 ↗
31. Van Embden · 2015
32. Polyol synthesis of nanoparticles: status and options regarding metals, oxides, chalcogenides, and non-metal elements10.1039/C5GC00943J ↗
33. Solvothermal synthesis and characterization of chalcopyrite CuInSe2 nanoparticles10.1007/s11671-009-9468-6 ↗
34. Nearly monodisperse CuInS2 hierarchical microarchitectures for photocatalytic H2 evolution under visible light10.1021/ic802399f ↗
35. One-pot, rapid synthesis of chalcopyrite CuInSe2 nanoparticles for low-cost thin film solar cell10.1016/j.powtec.2013.07.003 ↗
36. Simple synthesis of flower-like ln2S3 structures and their use as templates to prepare CuS particles10.1155/2011/280216 ↗
37. Phase evolution of CuS system in ethylene glycol solution: the effect of anion and PVP on the transformation of thiourea10.1002/cjoc.201300200 ↗
38. Liquid-like cationic sub-lattice in copper selenide clusters10.1038/ncomms14514 ↗
39. Synthesis and formation mechanism of CuInS2 nanocrystals with a tunable phase10.1039/C4CE00893F ↗
40. ChemInform Abstract: complexing OF polyols with cations
41. Alcohol as ligands. III. Complexes of Ethylene glycol with some divalent metal halides10.1016/S0020-1693(00)94784-4 ↗
42. Equilibrium and redox kinetics of copper(II)-Thiourea complexes10.1021/ic9502077 ↗
43. The Lewis acid-base definitions: a status report10.1021/cr60311a002 ↗
44. Preparation of elemental Cu and Ni nanoparticles by the polyol method: an experimental and theoretical approach10.1021/jp1104196 ↗
45. Mechanisms of the polyol reduction of copper(ii) salts depending on the anion type and diol chain length10.1039/C8DT03034K ↗
46. Studies on the reaction of copper(II) with thiourea-I. Silver-silver thiourea electrode for determination of free thiourea concentration in HClO4 medium10.1016/0022-1902(80)80048-0 ↗
47. Hierarchical CuS hollow nanospheres and their structure-enhanced visible light photocatalytic properties10.1039/c3ce40195b ↗
48. Synthesis and formation mechanism of CuInS2 nanocrystals with tunable phase10.1039/C4CE00893F ↗
49. Template free synthesis of CuS nanosheet-based hierarchical microspheres: an efficient natural light driven photocatalyst10.1039/c4ce00090k ↗
50. Oleic acid assisted formation mechanism of CuInS 2 nanocrystals with tunable structures10.1039/C4RA03957B ↗
51. Colloidal synthesis of wurtzite CuInS2 nanocrystals and their photovoltaic application10.1016/j.matlet.2015.02.015 ↗
52. The phase transformation of CuInS2 from chalcopyrite to wurtzite10.1186/s11671-015-0800-z ↗
53. CuInS2 quantum dots synthesized by a solvothermal route and their application as effective electron acceptors for hybrid solar cells10.1039/c0jm00611d ↗
54. The phase transformation of CuInS2 from chalcopyrite to wurtzite10.1186/s11671-015-0800-z ↗
55. Synthesis of Cu1.8S and CuS from copper-thiourea containing precursors; Anionic (Cl-, NO3-, SO42-) influence on the product stoichiometry10.1021/ic102593h ↗
56. Inorganic salt-induced phase control and optical characterization of cadmium sulfide nanoparticles10.1088/0957-4484/21/17/175601 ↗
57. Liang
58. Demirci · 2018
59. Anion-exchange induced phase transformation of mesostructured silica10.1021/ja808025m ↗
60. Phase transformation, morphology control, and luminescence evolution of cesium lead halide nanocrystals in the anion exchange process10.1039/C6RA22070C ↗
61. Cu2O thin films prepared by using four different copper salts at a low temperature: an investigation of their physical properties10.1016/j.mssp.2019.104805 ↗
62. Influence of annealing temperature on the phase composition and optical properties of CuInS2 films10.1016/j.mssp.2013.03.015 ↗
63. Low temperature joining of copper by Ag nanopaste: correlation of mechanical properties and process parameters10.1007/s40194-016-0381-1 ↗
64. Coalescence-induced crystallisation wave in Pd nanoparticles10.1038/srep05779 ↗
65. CZTS nanocrystals: a promising approach for next generation thin film photovoltaics10.1039/c3ee41627e ↗
66. Synthesis and application of colloidal CuInS2 semiconductor nanocrystals10.1021/am404084d ↗
67. Rapid facile synthesis of Cu2ZnSnS4 nanocrystals10.1039/C4TA01658K ↗
68. Immobilization of Co, Mn, Ni and Fe oxide co-catalysts on TiO2 for photocatalytic water splitting reactions10.1039/C9TA05637H ↗
69. Immobilization of Co, Mn, Ni and Fe oxide co-catalysts on TiO 2 for photocatalytic water splitting reactions10.1039/C9TA05637H ↗
70. Optical and structural characteristics of Y2O3 thin films synthesized from yttrium acetylacetonate10.1007/s10853-008-2566-5 ↗
71. Theoretical study, and infrared and Raman spectra of copper(II) chelated complex with dibenzoylmethane10.1016/j.saa.2014.02.097 ↗
72. A novel approach for preparation of acetylacetonate complex anchored to high order nanoporous silica (LUS-1)
73. Infrared and near-infrared spectroscopy of acetylacetone and hexafluoroacetylacetone10.1021/acs.jpca.5b01863 ↗
74. Solvothermal synthesis of zincblende and wurtzite CuInS 2 nanocrystals and their photovoltaic application10.1021/la300742p ↗
75. Enhanced photocatalytic activity of ternary CuInS2 nanocrystals synthesized from the combination of a binary Cu(I)S precursor and InCl310.1007/s11051-018-4213-7 ↗
76. Quasi-fermi-level splitting of Cu -poor and Cu -rich CuInS2 absorber layers10.1103/PhysRevApplied.11.054052 ↗
77. A modeling study on utilizing SnS2 as the buffer layer of CZT(S, Se) solar cells10.1016/j.solener.2018.04.010 ↗
78. Influence of the growth method on the photoluminescence spectra and electronic properties of CuInS2 single crystals10.1016/j.jlumin.2017.02.014 ↗
79. Band edges determination of CuInS2 thin films prepared by electrodeposition10.1016/j.matchemphys.2004.08.009 ↗
80. Formation of p-type CuInS2 absorber layers via sulfurization of co-electrodeposited Cu-In precursors10.1039/C5RA14725E ↗
81. Ternary CuInS2 photoelectrodes created using the sulfurization of Cu-In metal precursors for photoelectrochemical applications10.1016/j.materresbull.2013.02.085 ↗
82. Pulsed electrodeposition of p-type CuInSe2 thin films10.1016/j.electacta.2011.05.108 ↗