journal article·2017-06

Smoothening of scalloped DRIE trench walls

Zishan Ali Syed Mohammed, M.A.S. Olimpo, D.P. Poenar, S. Aditya

Publisher page

Abstract

Abstract Deep reactive ion etching (DRIE) is a popular technique used for etching through a silicon substrate to produce high aspect ratio trenches with vertical walls. However, an inherent problem associated with this technique is the resulting scalloping on the trench walls. Such rough trench walls can adversely influence subsequent process steps, e.g. trench filling with metal by electroplating, or the electrical behavior of devices which may incorporate and use these trenches. In this paper we report very significant roughness reduction of DRIE trench walls without optimizing the DRIE process parameters but only through the use of a post-DRIE processing technique involving successive thermal oxidation and oxide stripping steps. The scallop depth reduction is characterized in detail throughout the steps of this repetitive procedure and a quantitative analysis of the measured data illustrates the gradual improvement and smoothening of the trench walls.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Plasma Diagnostics and Applications · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. F. Laermer, A. Schilp, Method of anisotropic etching of silicon, US Patent 6,531,068, march 2003.
2. F. Laermer, A. Urban, Milestones in deep reactive ion etching, in: Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS ’05. 13th International Conference on, Vol. 2, 2005, Vol. 2, pp. 1118–1121. http://dx.doi.org/10.1109/SENSOR.2005.1497272.10.1109/SENSOR.2005.1497272 ↗
3. F. Laermer, A. Urban, Challenges, developments and applications of silicon deep reactive ion etching, Microelectronic Engineering 67-68 (0) (2003) 349–355, Proceedings of the 28th International Conference on Micro- and Nano-Engineering.10.1016/S0167-9317(03)00089-3 ↗
4. L. Filipovic, R. de Orio, S. Selberherr, Effects of sidewall scallops on the performance and reliability of filled copper and open tungsten tsvs, in: Physical and Failure Analysis of Integrated Circuits (IPFA), 2014 IEEE 21st International Symposium on the, 2014, pp. 321–326. http://dx.doi.org/10.1109/IPFA.2014.6898137.10.1109/IPFA.2014.6898137 ↗
5. B. Wu, A. Kumar, S. Pamarthy, High aspect ratio silicon etch: A review, Journal of Applied Physics 108 (5).10.1063/1.3474652 ↗
6. Effect of process parameters on the surface morphology and mechanical performance of silicon structures after deep reactive ion etching (drie)10.1109/JMEMS.2002.1007405 ↗
7. Advanced etching of silicon based on deep reactive ion etching for silicon high aspect ratio microstructures and three-dimensional micro- and nanostructures10.1016/j.mejo.2005.04.039 ↗
8. A systematic study of {DRIE} process for high aspect ratio microstructuring10.1016/j.vacuum.2010.01.052 ↗
9. Analysis of sidewall quality in through-wafer deep reactive-ion etching10.1016/S0167-9317(04)00122-4 ↗
10. Deep reactive ion etching of sub-micrometer trenches with ultra high aspect ratio10.1016/j.mee.2013.06.010 ↗
11. Effect of process parameters on sidewall damage in deep silicon etch10.1088/0960-1317/25/3/035024 ↗
12. M. Hermersdorf, C. Hibert, D. Grogg, A. Ionescu, High aspect ratio sub-micron trenches on silicon-on-insulator and bulk silicon, Microelectronic Engineering 88 (8) (2011) 2556–2558, in: Proceedings of the 36th International Conference on Micro- and Nano-Engineering (MNE) 36th International Conference on Micro- and Nano-Engineering (MNE).10.1016/j.mee.2011.02.030 ↗
13. Fabrication of micro-trench structures with high aspect ratio based on drie process for mems device applications10.1007/s00542-012-1720-9 ↗
14. Single-step deep reactive ion etching of ultra-deep silicon cavities with smooth sidewalls10.1016/j.sna.2013.12.031 ↗
15. Fabrication of vertical optical plane using {DRIE} and {KOH} crystalline etching of silicon wafer10.1016/j.sna.2006.02.015 ↗
16. A. Kndig, M. Cucinelli, P. Uggowitzer, A. Dommann, Preparation of high aspect ratio surface microstructures out of a zr-based bulk metallic glass, Microelectronic Engineering 67-68 (0) (2003) 405–409, Proceedings of the 28th International Conference on Micro- and Nano-Engineering.10.1016/S0167-9317(03)00096-0 ↗
17. Two-dimensional thermal oxidation of silicon 8212i. experiments10.1109/T-ED.1987.23037 ↗
18. Controlling sidewall smoothness for micromachined si mirrors and lenses10.1116/1.588595 ↗
19. A micromachined in-plane tunable optical filter using the thermo-optic effect of crystalline silicon10.1088/0960-1317/13/5/326 ↗
20. Fabrication of optically smooth, through-wafer silicon molds for pdms total internal reflection-based devices10.1007/s00542-009-0913-3 ↗
21. Planarize the sidewall ripples of silicon deep reactive ion etching
22. Smoothing dry-etched microstructure sidewalls using focused ion beam milling for optical applications10.1088/0960-1317/17/8/023 ↗
23. Thermal annealing in hydrogen for 3-d profile transformation on silicon-on-insulator and sidewall roughness reduction10.1109/JMEMS.2005.859092 ↗
24. T. Moriyama, Y. Ezoe, T. Ogawa, T. Ohashi, Y. Kanamori, I. Mitsuishi, M. Mita, K. Mitsuda, A. Maeda, Smoothing sidewalls of a mems – based silicon x-ray optics, in: Optical MEMS and Nanophotonics (OMN), 2011 International Conference on, 2011, pp. 205–206.10.1109/OMEMS.2011.6031043 ↗
25. Fabrication of three-dimensional magnetic microdevices with embedded microcoils for magnetic potential concentration10.1109/JMEMS.2006.876788 ↗
26. An integrated microfluidic platform for magnetic microbeads separation and confinement10.1016/j.bios.2005.08.006 ↗