journal article·2016-10

Modeling of poly-crystalline silicon ingot crystallization during casting and theoretical suggestion for ingot quality improvement

Amir Reza Ansari Dezfoli, Weng-Sing Hwang, James Augusto, Anmar Khalid Shukur, Shikai Tzeng

Publisher page

Abstract

Abstract Finite element (FE) and cellular automaton (CA) models are used in order to predict the microstructure of Poly-Crystalline Silicon (PC-Si) ingots during casting in a directional solidification furnace. During solidification, the 3D-FE model is used to simulate thermal field inside the furnace, while the nucleation and growth of PC-Si are simulated by the modified version of CA model. In this model both nucleation at silicon-crucible interface and nucleation of equiaxed grains on impurities are modeled. The origin of impurity is considered SiC particles when carbon segregates during the solidification and precipitates as SiC particles if carbon solubility limit is reached. The model is evaluated with experimental data for different parameters, such as: the temperature profile at the top and bottom of the PC-Si, grain size, and the height of solidified silicon during solidification. A one-dimensional form of grain growth is observed at the crucible-silicon interface, while a more two-dimensional form of growth is predicted at higher silicon height. The microstructure of PC-Si shows that the grain size increases as a function of PC-Si ingot height. The effects of the cooling rate and competitive growth on the final microstructure of PC-Si are also investigated. The results show that less nucleation sites are formed at the bottom of the crucible with a slower cooling rate, which leads to a larger grain size. Furthermore, the grains at the crucible side walls tend grow inward at a lower cooling rate, which can significantly change the microstructure of PC-Si. This study shows that the competitive growth phenomena plays an important role in the final microstructure of silicon ingots. A simulated model is proposed which shows that by changing the density and location of nucleation sites it is possible to achieve more effective control on final PC-Si micro structure. This simulation helps to explain the crystal behavior observed in ingots cast under different conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Multicrystalline silicon for solar cells10.1016/j.tsf.2005.01.061 ↗
2. Crystal growth and materials research in photovoltaics: progress and challenges10.1016/j.jcrysgro.2004.10.093 ↗
3. Nucleation and bulk growth control for high efficiency silicon ingot casting10.1016/j.jcrysgro.2010.10.103 ↗
4. Grain-size-related transient terahertz mobility of femtosecond-laser-annealed polycrystalline silicon10.1007/s00340-009-3580-2 ↗
5. Large-grain polycrystalline silicon films with low intragranular defect density by low-temperature solid-phase crystallization without underlying oxide10.1063/1.1448395 ↗
6. A high efficiency thin film silicon solar cell and module10.1016/j.solener.2004.08.028 ↗
7. Growth of large diameter silicon tube by EFG technique:: modeling and experiment10.1016/S0022-0248(01)01327-6 ↗
8. Modeling the multi-crystalline silicon ingots solidification process in a vertical square furnace
9. 3D time-dependent numerical study of the influence of the melt flow on the interface shape in a silicon ingot casting process10.1016/j.jcrysgro.2006.11.317 ↗
10. Bulk multicrystalline silicon growth for photovoltaic (PV) application10.1016/j.jcrysgro.2007.11.194 ↗
11. Modeling and improvement of silicon ingot directional solidification for industrial production systems10.1016/j.solmat.2009.04.001 ↗
12. Optimizing seeded casting of mono-like silicon crystals through numerical simulation10.1016/j.jcrysgro.2012.04.033 ↗
13. Growth by the heat exchanger method and characterization of multi-crystalline silicon ingots for PV
14. Growth of structure-controlled polycrystalline silicon ingots for solar cells by casting10.1016/j.actamat.2006.03.014 ↗
15. Growth of multicrystalline silicon ingot with both enhanced quality and yield through quartz seeded method
16. Grain control in directional solidification of photovoltaic silicon10.1016/j.jcrysgro.2012.01.007 ↗
17. G. Kühn, W. Kurz, D.J. Fisher, Fundamentals of Solidification. Trans Tech Publications, Switzerland‐Germany‐UK‐USA, 1986 (Erstauflage 1984), 242 Seiten, zahlreiche Abbildungen und Tabellen, Sachwortindex, SFr 54.00, ISBN 0‐87849‐523‐3, Crystal Research and Technology 21(9), 1986, 1176–1176.10.1002/crat.2170210909 ↗
18. Undercooling measurement and nucleation study of silicon droplet solidification10.1002/crat.201400165 ↗
19. Nucleation of silicon on Si3N4 coated SiO210.1016/j.jcrysgro.2011.07.003 ↗
20. Impurities influence on multicrystalline photovoltaic silicon10.1007/s12666-009-0065-2 ↗
21. Carbon concentration and particle precipitation during directional solidification of multicrystalline silicon for solar cells10.1016/j.jcrysgro.2007.11.165 ↗
22. One-dimensional model of the equiaxed grain formation in multi-crystalline silicon10.1016/j.jcrysgro.2011.02.001 ↗
23. 3D dynamic mesh numerical model for multi-crystalline silicon furnaces10.1016/j.jcrysgro.2006.12.075 ↗
24. K. Watanabe, K. Nagayama, K. Kuribayashi, Morphological transition in crystallization of Si from undercooled melt. in Journal of Physics: Conference Series, IOP Publishing, 2011, 012018.10.1088/1742-6596/327/1/012018 ↗
25. Growth mechanism of twin-related and twin-free facet Si dendrites10.1016/j.actamat.2005.03.022 ↗
26. In situ observation of Si faceted dendrite growth from low-degree-of-undercooling melts10.1016/j.actamat.2008.01.038 ↗
27. In-situ observations of melt growth behavior of polycrystalline silicon10.1016/j.jcrysgro.2003.10.075 ↗
28. Dendritic crystal growth in pure materials10.1016/j.jcrysgro.2003.12.034 ↗
29. Mechanisms for crystallographic orientation in the crystallization of thin silicon films from the melt10.1557/JMR.1988.1232 ↗
30. Dendrite growth processes of silicon and germanium from highly undercooled melts10.1007/s11661-999-0282-7 ↗
31. In situ observations of crystal growth behavior of silicon melt10.1016/S0022-0248(02)01521-X ↗
32. Directional growth method to obtain high quality polycrystalline silicon from its melt10.1016/j.jcrysgro.2006.04.016 ↗
33. Influence of inclusion on nucleation of silicon casting for photovoltaic (PV) application10.1016/j.jcrysgro.2010.10.079 ↗
34. Hewitt · 1994
35. Modelling of the transition from a planar faceted front to equiaxed growth: application to photovoltaic polycrystalline silicon10.1016/j.jcrysgro.2008.10.011 ↗
36. N. Mangelinck-Noël, D. Ballutaud, N. Quang, G. Goaer, in in 20th European Photovoltaic Solar Energy Conference and Exhibition, Barcelona,Spain, 2005, pp. 6–10.
37. The carbon distribution in multicrystalline silicon ingots grown using the directional solidification process10.1016/j.jcrysgro.2009.11.020 ↗
38. H. Fredriksson, U. Åkerlind, Faceted and Dendritic Solidification Structures, Solidification and Crystallization Processing in Metals and Alloys, pp. 475–586.
39. Quantifying and analyzing neighborhood configuration characteristics to cellular automata for land use simulation considering data source error10.1007/s12145-012-0097-8 ↗
40. Computer simulation of grain growth—I. Kinetics10.1016/0001-6160(84)90151-2 ↗