Cu2O thin films prepared by using four different copper salts at a low temperature: An investigation of their physical properties
Source abstract
Abstract
Abstract In this study, cuprous oxide (Cu2O) films were prepared using four different copper salt ((CH3COO)2Cu·H2O, CuSO4·5H2O, Cu(NO3)2·3H2O, and CuCl2·2H2O) with the SILAR method at a low temperature (60 °C) on a glass substrate with 40 immersion cycles. The structural, optical, morphological and electrical properties of the films were investigated. In the X-ray diffraction (XRD) analysis, it was found that Cu2O thin films were polycrystalline, and there were no great differences between the structural properties of the films. The optical properties of the Cu2O thin film were analyzed by absorption spectrum results. As the thickness value of the Cu2O thin films increased, the energy band gap values decreased. In the FE-SEM (Field Emission-Scanning Electron Microscope) images, it was seen that spherical agglomeration generally occurred in the films, and, in some films, there were rod-structured particles in spherical form. In the Hall measurements, Cu2O thin films were found to have p-type electrical conductivity, and the electrical resistivity values of the films (ρ) were found to be 1.24 × 104, 4.06 × 104, 2.86 × 103, and 1.67 × 104 Ωcm, respectively. The mobility values (μ) of the films were found to be 174, 87, 80, and 23 cm2/V, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Copper oxide thin films prepared from copper dipivaloylmethanate and oxygen by chemical vapor deposition10.1143/JJAP.37.4099 ↗
2. Room temperature fabrication of p-channel Cu2O thin-film transistors on flexible polyethylene terephthalate substrates10.1063/1.4739524 ↗
3. Sol–gel approach to nanophasic copper oxide thin films10.1016/S0040-6090(03)00940-4 ↗
4. Structural and electrical properties of CuO films and n-ZnO/p-CuO heterojunctions prepared by chemical bath deposition based technique10.1016/j.solmat.2014.08.023 ↗
5. Cu2O thin films prepared using modified successive ionic layer adsorption and reaction method and their use in photoelectrochemical solar cells
6. Controlled growth and characteristics of single-phase Cu2O and CuO films by pulsed laser deposition10.1016/j.vacuum.2008.10.003 ↗
7. All-oxide photovoltaics10.1021/jz3017039 ↗
8. Cu2O nanowire photocathodes for efficient and durable solar water splitting10.1021/acs.nanolett.5b04929 ↗
9. Tuning the near-gap electronic structure of Cu2O by anion-cation co-doping for enhanced solar energy conversion10.1142/S0217984916504297 ↗
10. A Cu2O/TiO2 heterojunction thin film cathode for photoelectrocatalysis panel10.1016/S0927-0248(02)00343-4 ↗
11. Chemical deposition of Cu2O thin films10.1016/0040-6090(85)90041-0 ↗
12. Heteroepitaxial growth of Cu2O thin film on ZnO by metal organic chemical vapor deposition10.1016/j.jcrysgro.2009.07.020 ↗
13. Cu2O thin films deposited by reactive direct current magnetron sputtering10.1016/j.tsf.2009.02.127 ↗
14. Preparation of nanocrystalline Cu2O thin film by pulsed laser deposition10.1007/s10854-011-0294-0 ↗
15. Sol–gel deposited Cu2O and CuO thin films for photocatalytic water splitting10.1039/C4CP03241A ↗
16. Structural, optical, electrical, and photoelectrochemical properties of cuprous oxide thin films grown by modified SILAR method10.1016/j.mssp.2019.02.014 ↗
17. Chemical deposition of Cu2O thin films10.1016/0040-6090(85)90041-0 ↗
18. Chemically deposited copper oxide thin films: structural, optical and electrical characteristics10.1016/S0169-4332(99)00239-1 ↗
19. Effect of anionic bath temperature on morpohology and photo electrochemical properties of Cu2O deposited by SILAR10.1016/j.mssp.2018.07.031 ↗
20. Investigations on the role of alkali to obtain modulated defect concentrations for Cu2O thin films10.1016/j.apsusc.2013.10.183 ↗
21. Study of the electronic properties of Cu2O thin films by x-ray absorption spectroscopy10.1016/j.ijleo.2017.12.119 ↗
22. Investigation of properties the copper sulfide thin films prepared from different copper salts10.1016/j.ijleo.2018.05.031 ↗
23. Successive ionic layer adsorption and reaction (SILAR) method for the deposition of large area (∼10 cm2) tin disulfide (SnS2) thin films10.1016/S0025-5408(00)00405-0 ↗
24. Cullity · 1978 · 515
25. Influence of post-deposition annealing on the structural and optical properties of ɣ-MnS thin film10.1016/j.ijleo.2018.02.118 ↗
26. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray Debye Scherrer spectrum10.1080/14786435608238074 ↗
27. Electrodeposition of Cu2O: an excellent method for obtaining films of controlled morphology and good performance in Li-ion batteries10.1149/1.1854126 ↗
28. Optical and electrical properties of spray pyrolysis deposited nano-crystalline BiFeO3 films10.1063/1.3662093 ↗
29. Low temperature (<100 °C) deposited p-type cuprous oxide thin films: importance of controlled oxygen and deposition energy10.1016/j.tsf.2011.04.192 ↗
30. Kanzari · Semicond. Sci. Technol. · 2000 · 15 · 33510.1088/0268-1242/15/4/306 ↗
31. Nanocrystalline p-type-cuprous oxide thin films by room temperature chemical bath deposition method10.1016/j.jallcom.2011.02.016 ↗
32. Seed-mediated synthesis of monodispersed Cu2O nanocubes with five different size ranges from 40 to 420 nm10.1002/adfm.200700356 ↗
33. One-step chemical bath deposition and photocatalytic activity of Cu2O thin films with orientation and size controlled by a chelating agent10.1016/j.matchemphys.2013.10.004 ↗
34. Hall mobility of cuprous oxide thin films deposited by reactive direct-current magnetron sputtering10.1063/1.3589810 ↗
35. Growth of Cu2O thin films with high hole mobility by introducing a low-temperature buffer layer10.1016/j.jcrysgro.2008.11.038 ↗