Fabrication of high aspect ratio copper nanowires using supercritical CO2 fluids electroplating technique in AAO template
Source abstract
Abstract
Abstract This study utilizes the supercritical and post-supercritical electroplating technique, to fabricate copper nano-wires inside ultra-high aspect ratio Anodic Aluminum Oxide templates (AAO templates). Comparisons of the electroplating capabilities and results were made between these methods and the more common traditional electroplating techniques. Under identical experimental conditions and on ultra-high aspect ratio AAO template with thickness of 60 µm (aspect ratio of 1:490), it is evident from the results that the supercritical electroplating process has the fastest electroplating velocity of the three processes (~1.33 µm/min), followed by post-supercritical electroplating (~1 µm/min) and traditional electroplating is the slowest (~0.67 µm/min). This study also discusses the electroplating quality of the copper nano-wires. Samples were sliced along the cross-section, and Field Emission Scanning Electron Microscopy (FESEM) was utilized to observe the copper nano-wires. X-Ray Diffraction (XRD) was used to observe that the crystal structures is polycrystalline, and with the use of equations it is determined that grain size will not be severely affected by changes in current density and supercritical pressure in themselves, but instead the different processes do produce an evident change. The grain size achieved with supercritical electroplating is the smallest, followed by the post-supercritical electroplating, and the largest was given by the traditional electroplating process. Through these results it can be proved that supercritical electroplating process indeed provides grain refinement capabilities. The supercritical fluid-enabled electroplating process utilized for these experiments does not need addition of any surfactants to aid filling of the structures, but only relies on the intrinsic properties of supercritical fluids to achieve complete filling of nano-holes, and because there are no surfactants, we can achieve higher degree of purity in the copper nano-wires.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Semiconductor materials and devices · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Fully sealed, high-brightness carbon-nanotube field-emission display10.1063/1.125253 ↗
2. Effect of dye-sensitized solar cells based on the anodizing TiO2 nanotube array/nanoparticle double-layer electrode10.7567/JJAP.53.11RB02 ↗
3. A novel method for metal oxide nanowire synthesis
4. Ultraviolet-emitting ZnO nanowires synthesized by a physical vapor deposition approach10.1063/1.1342050 ↗
5. Excition radiative lifetime in ZnO nanorods fabricated by vapor phase transport method10.1016/j.physletb.2007.02.069 ↗
6. Chemical Vapor Growth of One-Dimensional Magnetite Nanostructures10.1002/adma.200701448 ↗
7. Metallorganic chemical vapor deposition of ZnO nanowires from zinc acetylacetonate and oxygen10.1149/1.3006390 ↗
8. Sol-gel synthesis of sub-50nm ZnO nanowires on pulse laser deposited ZnO thin films10.1016/j.apsusc.2006.03.006 ↗
9. The elastic module of Ag nanowires prepared from electrochemical deposition10.1016/j.jallcom.2008.06.068 ↗
10. Initial stages of electrodeposition of metal nanowires in nanoporous templates10.1016/j.electacta.2007.04.122 ↗
11. Porous anodic alumina membranes formed by anodization of AA1050 alloy as templates for fabrication of metallic nanowire arrays10.1016/j.surfcoat.2010.09.038 ↗
12. Electrodeposited bismuth telluride nanowire arrays with uniform growth fronts10.1021/nl070711w ↗
13. Electrochemical synthesis of magnetostrictive Fe-Ga/Cu multilayered nanowire arrays with tailored magnetic response10.1002/adfm.201101390 ↗
14. Critical phenomena: 150 years since Cagniardh de la Tour10.30970/jps.13.3001 ↗
15. Electroplating of nanostructured nickel in emulsion of supercritical carbon dioxide in electrolyte solution10.1246/cl.2002.1086 ↗
16. New electroplating method of nickel in emulsion of supercritical carbon dioxide and electroplating solution to enhance uniformity and hardness of plated film10.1016/j.tsf.2003.09.072 ↗
17. Cu electroplating using suspension of supercritical carbon dioxide in copper-sulfate-based electrolyte with Cu particles10.1016/j.tsf.2012.03.089 ↗
18. Effects of pressure on electroplating of copper using supercritical carbon dioxide emulsified electrolyte10.1016/j.tsf.2012.05.058 ↗
19. Crystal growth on novel Cu electroplating using suspension of supercritical CO2 in electrolyte with Cu particles10.1016/j.surfcoat.2012.03.058 ↗
20. Filling of nanoscale holes with high aspect ratio by Cu electroplating using suspension of supercritical carbon dioxide in electrolyte with Cu particles10.1016/j.mee.2012.02.031 ↗
21. Cu wiring into nano-scale holes by electrodeposition in supercritical carbon dioxide emulsified electrolyte with a continuous-flow reaction system10.1016/j.supflu.2014.03.010 ↗
22. Fabrication of through-silicon vias by supercritical CO2 emulsion-enabled nickel electroplating10.1016/j.mssp.2014.02.025 ↗
23. An investigation of supercritical-CO2 copper electroplating parameters for application in TSV chips10.1088/0960-1317/25/1/015004 ↗
24. An electroplating technique using the post supercritical carbon dioxide mixed watts electrolyte10.1016/j.surfcoat.2013.05.016 ↗
25. Electrochemical fabrication of highly ordered semiconductor and metallic nanowire arrays10.1021/cm0007297 ↗
26. High-performance carbon nanotube network transistors for logic applications10.1063/1.2844889 ↗
27. High resolution transmission electron microscopy study of iron-silicide nanodot structures grown on faintly oxidized Si (111) Surfaces10.1016/j.tsf.2008.10.057 ↗
28. Characterization of Ni-Cr thin films by X-ray analysis10.1016/0040-6090(87)90159-3 ↗
29. R. Wiebe, V.L. Gaddy, The solubility carbon dioxide in water at various temperatures from 12 to 40° and at pressures to 500 atmospheres, Contribution from the Bureau of Agricultural Chemistry and Engineering, U.S. Department of Agriculture Washington D.C., Solubility carbon dioxide in water, vol. 815, 194010.1021/ja01861a033 ↗