journal article·2020-02

Phase transformation from rutile to anatase with oxygen ion dose in the TiO2 layer formed on a Ti substrate

A. Medvids, S. Varnagiris, E. Letko, D. Milcius, L. Grase, S. Gaidukovs, A. Mychko, A. Pludons, P. Onufrijevs, H. Mimura

Publisher page

Abstract

Abstract The oxygen plasma immersion ion implantation (O-PIII) method was used to form a TiO2 layer on a Ti substrate. The content of the anatase polycrystalline phase increased from 5.1% to 22.3% of the total TiO2 amount with a higher O+ ion dose. The oxygen ion doses were 3.6 × 1016 ions, 8.1 × 1016 ions, 1.26 × 1017 ions, for 1, 2, and 3 h, respectively, with ion energies of E ≈ 0.8 keV. The polycrystalline phases and morphology of the obtained films were characterized by XRD, FESEM, AFM, and Raman spectroscopy. The chemical bond analysis and layer-by-layer measurements for TiO2 layer thickness evaluation were performed by XPS. The photocatalytic decomposition reaction constants of a methylene blue solution increased from 3.2 × 10−3 min−1 to 4.2 × 10−3 min−1 under UV-A irradiation and the liquid free surface energy increased from 39.0 mJ/m2 to 49.5 mJ/m2 with a higher O-PIII treatment doses. These results were explained by the partial phase transition of the TiO2 layer from rutile to anatase. Thus, the increase in the O+ ions implantation dose into the Ti substrate invoked the reduction of material density from Ti (ρ = 4.506 g/cm3) through TiO2 rutile (4.23 g/cm3) to TiO2 anatase (3.78 g/cm3) phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Conrad · 2000
2. Plasma source ion implantation: a new, cost-effective, non-line-of-sight technique for ion implantation of materials10.1016/0257-8972(88)90033-3 ↗
3. Modification of metals by plasma immersion ion implantation10.1016/j.surfcoat.2018.04.039 ↗
4. Progress in direct-current plasma immersion ion implantation and recent applications of plasma immersion ion implantation and deposition10.1016/j.surfcoat.2012.03.073 ↗
5. Surface functionalization of biomaterials by plasma and ion beam10.1016/j.surfcoat.2017.08.011 ↗
6. Antimicrobial effects of oxygen plasma modified medical grade Ti-6Al-4V alloy10.1016/j.vacuum.2012.07.014 ↗
7. Raman study of titanium oxide layers produced with plasma immersion ion implantation10.1016/S0257-8972(99)00559-9 ↗
8. Evolution of local texture and grain morphology in metal plasma immersion ion implantation &; deposition of TiN10.1116/1.1795828 ↗
9. Effect of target size on dose uniformity in plasma-based ion implantation10.1063/1.365312 ↗
10. Two dimensional computer simulation of plasma immersion ion implantation10.1590/S0103-97332004000800033 ↗
11. Effect of oxygen plasma immersion ion implantation treatment on corrosion resistance and cell adhesion of titanium surface10.1111/j.1600-0501.2010.02132.x ↗
12. Oxygen plasma immersion ion implantation treatment enhances the human bone marrow mesenchymal stem cells responses to titanium surface for dental implant application10.1111/clr.12293 ↗
13. A novel technique for tailored surface modification of dental implants - a step wise approach based on plasma immersion ion implantation10.1111/j.1600-0501.2011.02352.x ↗
14. Formation of titanium oxide films on titanium and Ti6Al4V by O2-plasma immersion ion implantation10.1016/S0257-8972(00)00712-X ↗
15. Oxygen implantation and diffusion in pure titanium by an rf inductively coupled plasma10.1016/j.vacuum.2009.01.078 ↗
16. Ion implantation of oxygen and nitrogen in CpTi10.1016/j.porgcoat.2008.08.021 ↗
17. Phase formation in titanium after high-fluence oxygen ion implantation10.1016/S0168-583X(98)00660-0 ↗
18. Preparation of anatase and rutile thin films by controlling oxygen partial pressure10.1016/S0169-4332(02)00532-9 ↗
19. Oxygen partial pressure dependence of the properties of TiO2thin films deposited by DC reactive magnetron sputtering10.1016/j.proeng.2012.01.1326 ↗
20. Note on the artefacts in SRIM simulation of sputtering10.1016/j.apsusc.2018.01.039 ↗
21. Simulation of ion beam sputtering with SDTrimSP, TRIDYN and SRIM10.1016/j.apsusc.2014.03.152 ↗
22. Study of the radiation damage caused by ion implantation in ZnO and its relation to magnetism10.1016/j.nimb.2019.06.013 ↗
23. SRIM simulation of carbon ions interaction with Ni nanotubes10.1016/j.matpr.2018.12.087 ↗
24. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
25. Yuan · 2013 · 3
26. Calculation of interfacial tension in polymer system10.1002/polc.5070340105 ↗
27. NIST · 2017
28. Black carbon-doped TiO2 films: synthesis, characterization and photocatalysis10.1016/j.jphotochem.2019.111941 ↗
29. Tailoring of TiO2 film microstructure by pulsed-DC and RF magnetron co-sputtering10.1016/j.surfcoat.2019.124906 ↗
30. Study of plasma immersion ion implantation into silicon substrate using magnetic mirror geometry10.1016/j.apsusc.2012.05.132 ↗
31. A review on synthesis of nano-TiO2 via different methods
32. Mattox · 1998
33. Review of the anatase to rutile phase transformation10.1007/s10853-010-5113-0 ↗
34. Electrochemical synthesis and in situ Raman spectroscopy of thin films of titanium dioxide10.1002/jrs.1250221006 ↗
35. Raman scattering study on anatase TiO2 nanocrystals10.1088/0022-3727/33/8/305 ↗
36. Raman spectra of titanium dioxide10.1016/0022-4596(82)90006-8 ↗
37. Enhancement removal of tartrazine dye using HCl-doped polyaniline and TiO2-decorated PANI particles10.1088/2053-1591/3/8/085301 ↗
38. Solar CPC pilot plant photocatalytic degradation of indigo carmine dye in waters and wastewaters using supported-TiO2: influence of photodegradation parameters10.1155/2015/656153 ↗
39. Investigation of E. coli bacteria inactivation by photocatalytic activity of TiO2 coated expanded polystyrene foam10.1088/2053-1591/aa6604 ↗
40. Recent advances in photocatalysis for environmental applications
41. Synergism between rutile and anatase TiO2 particles in photocatalytic oxidation of naphthalene10.1016/S0926-860X(02)00610-5 ↗
42. Why is anatase a better photocatalyst than rutile? - model studies on epitaxial TiO2 films