journal article·2018-09

Preparation of high-density InGaZnO4 target by the assistance of cold sintering

Jiang-An Liu, Chen-Hui Li, Jing-Jing Shan, Jia-Ming Wu, Ru-Feng Gui, Yu-Sheng Shi

Publisher page

Abstract

Abstract In this study, near stoichiometric InGaZnO4 (IGZO) nano-powders were synthesized by a multistep precipitation method with the ammonia solution used as precipitant at 10 °C. Then cold sintering process (CSP) was applied to benefit the green pellets. In the next step, the green pellets fabricated by CSP and dry pressing process (CP) were pressureless sintered (PLS) at 1200 °C or higher temperature for a scheduled time respectively. The in-situ high temperature optical dilatometric test, XRF, XRD and SEM were carried out and the sintering kinetics was analyzed based on the Master Sintering Curve (MSC) model. The results showed that the holding time for densification of CSP/PLS pellets was about 1 h at 1200 °C, just about 1/5 of CP/PLS ones. MSC model revealed that the sintering activation energy (Qa) of CSP/PLS and CP/PLS were 489.7 KJ /mol and 655.6 KJ /mol respectively. The highest relative density (99.30%) of all sintered pellets was achieved by CSP/PLS process and the optimal process parameters were CSP at 180 °C, 200 MPa and 10 min, and PLS at 1200 °C for 1 h. CSP/PLS effectively reduced the sintering temperature and holding time in comparison with the CP/PLS in this research and previous research.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrical and Thermal Properties of Materials · Advanced ceramic materials synthesis · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. IGZO thin-film light-addressable potentiometric sensor10.1109/LED.2016.2614274 ↗
2. Highly transparent, high-performance IGZO-TFTs using the selective formation of IGZO source and drain electrodes10.1109/LED.2014.2317943 ↗
3. Preparation of IGZO sputtering target and its applications to thin-film transistor devices10.1016/j.ceramint.2012.01.052 ↗
4. Effects of channel dimensions on performance of a-InGaZnO4 thin-film transistors10.1116/1.3556921 ↗
5. Preparation and sintering of indium–gallium–zinc oxide ceramics with different zinc oxide contents10.1016/j.jeurceramsoc.2015.06.029 ↗
6. Synthesis of InGaZnO4 nanoparticles using low temperature multistep precipitation method10.1016/j.matchemphys.2015.06.003 ↗
7. Cold sintering process: a novel technique for low temperature ceramic processing of ferroelectrics10.1111/jace.14554 ↗
8. Utilizing the cold sintering process for flexible–printable electroceramic device fabrication10.1111/jace.14467 ↗
9. Cold sintering: a paradigm shift for processing and integration of ceramics10.1002/anie.201605443 ↗
10. Cold sintering process: a new era for ceramic packaging and microwave device development10.1111/jace.14603 ↗
11. Demonstration of the cold sintering process study for the densification and grain growth of ZnO ceramics10.1111/jace.14617 ↗
12. Demonstration of the cold sintering process study for the densification and grain growth of ZnO ceramics10.1111/jace.14617 ↗
13. Master sintering curve: a practical approach to sintering10.1111/j.1151-2916.1996.tb08097.x ↗
14. Combined stage sintering model10.1111/j.1151-2916.1992.tb05549.x ↗
15. Master sintering curve: a practical approach to its construction10.2298/SOS1001025P ↗
16. Mccoy · 2008
17. A computer program of master sintering curve model to accurately predict sintering results
18. Construction and validation of master sintering curve for TiO2 for pressureless sintering10.1179/174367608X263359 ↗
19. Sintering behavior and microstructural evolution of the monodispersed β-gallium oxide micro-particles with different morphology and size10.1016/j.ceramint.2017.09.082 ↗
20. M. Takahashi, K. Akimoto, S. Yamazaki, U.S. Patent 0261657, Oct. 2012.
21. C.H. Li, J.J. Shan, J.A. Liu, R.F. Gui, J.M. Wu, Y.S. Shi, A Preparation Method of Indium Gallium Zinc Oxide Derivatives, China Patent Application No: CN107010654A, Aug, 2017.
22. Comparative study of the sintering process and thin film sputtering of AZO, GZO and AGZO ceramics targets10.1016/j.ceramint.2014.04.150 ↗
23. Study of high-density AZO ceramic target10.1016/j.mssp.2011.02.004 ↗
24. Determination of the activation energy and master sintering curve for NiO/YSZ composite solid oxide fuel cell anodes10.1111/jace.13405 ↗