Photocatalytic oxidation of thiophene over cerium doped TiO2 thin film
Source abstract
Abstract
Abstract Samples of TiO2 and TiO2 doped with 2% and 8% cerium ions were prepared by a sol-gel method and used as photocatalysts for the oxidation of vaporized thiophene. X-ray diffraction patterns showed a mixed phase of anatase and rutile for TiO2, while 2%Ce/TiO2 and 8%Ce/TiO2 were dominated by the anatase phase. As seen in the transmission electron microscopy image, the particle size of Ce/TiO2 was about 10 nm which was smaller than the undoped TiO2. The extended x-rays absorption fine structures revealed the substitutional effect of cerium in the TiO2 structure. Cerium-doped TiO2 exhibited a smaller photocurrent compared to that of TiO2, which suggested the electrons were trapped by cerium ions. In situ diffuse reflectance infrared spectroscopy under UV irradiation and x-ray photoemission spectroscopy were used to investigate the photocatalytic oxidation of thiophene on the prepared catalysts. Doping of cerium ions in TiO2 resulted in an enhanced adsorption of thiophene on the catalyst surface. The oxidation products of carboxylic acid with small amounts of sulfate ions were observed. As seen from the infrared absorption spectrum, 2%Ce/TiO2 and 8%Ce/TiO2 exhibited higher photocatalytic activity than those of the undoped TiO2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Air pollutant emission potentials of cotton textile manufacturing industry10.1016/S0959-6526(98)00013-4 ↗
2. A new approach to kinetics of purifying waste gases containing volatile organic compounds (VOC) in low concentration by using the biological method10.1016/S0959-6526(02)00195-6 ↗
3. Burner design for an industrial furnace for thermal post-combustion10.1016/j.egypro.2017.07.171 ↗
4. Acetaldehyde degradation under UV and Visible irradiation using CeO2-TiO2 composite systems: evaluation of the photocatalytic efficiencies10.1016/j.cej.2014.06.056 ↗
5. Environmental applications of semiconductor photocatalysis10.1021/cr00033a004 ↗
6. Enhanced photocatalytic activity of Ce3+–TiO2 for 2-mercaptobenzothiazole degradation in aqueous suspension for odour control10.1016/j.apcata.2005.02.025 ↗
7. EPR study of the radicals formed upon UV irradiation of ceria-based photocatalysts10.1016/S1010-6030(02)00092-8 ↗
8. Ionic liquid-templated synthesis of mesoporous CeO2-TiO2 nanoparticles and their enhanced photocatalytic activities under UV or visible light10.1016/j.jphotochem.2011.06.014 ↗
9. Titanium dioxide photocatalysis10.1016/S1389-5567(00)00002-2 ↗
10. Challenges in photocatalytic reduction of nitrate as a water treatment technology10.1016/j.scitotenv.2017.04.238 ↗
11. TiO2 assisted photocatalytic decomposition of butachlor in aqueous solution, ground water and effluent10.1016/j.matpr.2017.12.316 ↗
12. Visible light photocatalytic activity of macro-mesoporous TiO2-CeO2 inverse opals10.1016/j.jphotochem.2017.10.052 ↗
13. Titanium dioxide photocatalysis10.1016/S1389-5567(00)00002-2 ↗
14. Ordered mesoporous black TiO2 as highly efficient hydrogen evolution photocatalyst10.1021/ja504802q ↗
15. Spin trapping and electron spin resonance detection of radical intermediates in the photodecomposition of water at titanium dioxide particulate systems10.1021/j100487a017 ↗
16. Surface complexation of colloidal semiconductors strongly enhances interfacial electron-transfer rates10.1021/la00060a018 ↗
17. Cyclic voltammetry deposition of nickel nanoparticles on TiO2 nanotubes and their enhanced properties for electro-oxidation of methanol10.1016/j.jelechem.2017.05.024 ↗
18. Photocatalytic activity of TiO2-WO3 mixed oxides in relation to electron transfer efficiency10.1016/j.apcatb.2016.01.004 ↗
19. Evaluating the efficiency of nano-sized Cu doped TiO2/ZnO photocatalyst under visible light irradiation10.1016/j.molliq.2017.11.030 ↗
20. Enhanced photocatalytic activity of Ce3+-TiO2 for 2-mercaptobenzothiazole degradation in aqueous suspension for odor control10.1016/j.apcata.2005.02.025 ↗
21. Ti3+-TiO2/Ce3+-CeO2 Nanosheet heterojunctions as efficient visible-light-driven photocatalysts10.1016/j.materresbull.2017.12.016 ↗
22. Photochemistry on nonreactive and reactive (semiconductor) surfaces10.1021/cr00017a013 ↗
23. Lanthanide oxide doped titanium dioxide photocatalysts: effective photocatalysts for the enhanced degradation of salicylic acid and t-cinnamic acid10.1006/jcat.2001.3388 ↗
24. Lanthanide oxide-doped titanium dioxide photocatalysts: novel photocatalysts for the enhanced degradation of p-chlorophenoxyacetic acid10.1021/es001613e ↗
25. Effect of cerium content and post-thermal treatment on doped anisotropic TiO2 nanomaterials and kinetic study of the photodegradation of formic acid10.1016/j.molcata.2015.08.024 ↗
26. (Photo)electrochemical characterization of nanopopous TiO2 and Ce-doped TiO2 sol-gel film electrode10.1016/j.electacta.2012.07.129 ↗
27. G.N. George, I.J. Pickering, EXAFSPAK-A Suite of Computer Programs for Analysis of X-ray Absorption Spectra, Menlo Park, Canada, 1993.
28. Ce-doped nanoparticles of TiO2: rutile-to-brookite phase transition and evolution of Ce local-structure studied with XRD and XANES10.1016/j.matchemphys.2013.01.055 ↗
29. Tailored titanium dioxide nanomaterial: anatase nano particles and brookite nanorods as highly active photocatalysts10.1021/cm903472p ↗
30. IR-analysis of H-bonded H2O on the pure TiO2 surface10.1016/j.molstruc.2003.12.057 ↗
31. Infrared spectroscopy of the TiO2/aqueous solution interface10.1021/la980855d ↗
32. Photocatalytic oxidation of gaseous toluene on anatase TiO2 catalyst: mechanistic aspects and FT-IR investigation10.1016/S0926-3373(98)00088-5 ↗
33. Crystal-structure effects in the Ce L3-edge x-ray-absorption spectrum of CeO2: multiple-scattering resonances and many-body final states10.1103/PhysRevB.50.5074 ↗
34. Photocatalytic mechanism of TiO2–CeO2 films prepared by magnetron sputtering under UV and visible light10.1016/j.susc.2005.08.016 ↗
35. Structural characterizations of sol–gel synthesized TiO2 and Ce/TiO2 nanostructures10.1016/j.physb.2011.08.108 ↗
36. Nanostructured TiO2–CeO2 mixed oxides by an aqueous sol–gel process: effect of Ce:Ti molar ratio on physical and sensing properties10.1016/j.snb.2010.08.029 ↗
37. Preparation and properties of Ce-doped TiO2 photocatalyst10.1016/j.materresbull.2012.04.077 ↗
38. Infrared spectroscopy and temperature-programmed desorption study of adsorbed thiophene on γ-Al2O310.1021/la950410e ↗
39. Surface acidity of sulfated TiO2−SiO2 sol-gels10.1021/la950927q ↗
40. A study of the adsorption of thiophenic sulfur compounds using flow calorimetry10.1016/j.apcatb.2004.07.018 ↗
41. Kinetics and mechanism of the photo-oxidation of thiophene by O2 adsorbed on molecular sieves10.1016/S1005-9040(08)60020-3 ↗
42. Interaction of thiophene with stoichiometric and reduced rutile TiO2(110) surfaces: role of Ti3+ sites in desulfurization activity10.1016/S1381-1169(03)00206-1 ↗
43. Novel core-shell structured mesoporous titania microspheres: preparation, characterization and excellent photocatalytic activity in phenol abatement10.1016/j.jphotochem.2007.10.017 ↗
44. XPS characterization of Au/TiO2 catalysts: binding energy assessment and irradiation effect10.1016/j.apcata.2010.05.039 ↗
45. Spectroscopic studies of interfacial structures of CeO2–TiO2 mixed oxides10.1016/j.apsusc.2007.05.013 ↗
46. Synthesis of functionalized mesoporous TiO2 molecular sieves and their application in photocatalysis10.1016/j.micromeso.2007.06.055 ↗
47. Novel core-shell structured mesoporous titania microspheres: preparation, characterization and excellent photocatalytic activity in phenol abatement10.1016/j.jphotochem.2007.10.017 ↗