journal article·2018-10

Vertical CuO nanowires array electrodes: Visible light sensitive photoelectrochemical biosensor of ethanol detection

Weiting Zhan, Zhe Chen, Ji Hu, Xiongjie Chen

Publisher page

Abstract

Abstract Photoelectrochemical (PEC) sensing using visible light has attracted great attention for high sensitivity with low undesired background noise. A CuO electrode with nanowires on Cu foil was synthesized by thermal oxidation and the devices was used to explore the PEC sensing for ethanol detection under visible light. The morphology, composition, optical, and PEC properties of CuO nanowires have been systematically investigated. The results showed that the CuO nanowires were present on the top surface of specimens with single phase and the thick interface layer were made of Cu2O between CuO nanowires and Cu foil substrate. The CuO nanowires on surface contained two types of nanowire (bend CuO Nws and vertical CuO Nws). With the temperature increasing, the Nws of first type decreased, and the Nws of second type started to increase. When the Cu foil were annealed at 700 °C, densely bundled CuO Nws array was vertically fabricated on the foil. The band gaps of CuO nanowires annealing at 400 °C, 500 °C, 600 °C, and 700 °C, were 1.715, 1.714, 1.698, 1.691 eV, indicating that CuO nanowires annealing at 700 °C can obtain the highest photoreponse. The photocurrent of the vertical CuO nanowires array annealing at 700 °C were calculated with 668 μA cm−2 about 2-fold, 6-fold and 10-fold higher than that to CuO nanowires annealing at 600 °C, 500 °C and 400 °C, respectively. Combing with the morphology of CuO nanowires annealing at different temperature, the vertivally-aligned nanowires array at 700°Cwas attractive than others. This vertical CuO nanowires device prepared at 700 °C is visible-light irradiation and shows the fast photoresponse, present a detection limit of 23.2 nM, which is much lower than those with the similar configurations reported previously. It is probable that the vertical CuO nanowires array may be applied as the proposed PEC sensor to determine ethanol in further.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Development of a photoelectrochemical sensor for detection of TBHQ antioxidant based on LiTCNE-TiO2 composite under visible LED light10.1016/j.jelechem.2016.05.013 ↗
2. An ultraviolet selective photodetector based on a nanocrystalline TiO2 photoelectrochemical cell10.1016/j.sna.2011.07.005 ↗
3. Sunlight-driven photoelectrochemical sensor for direct determination of hexavalent chromium based on Au decorated rutile TiO2 nanorods10.1016/j.apcatb.2016.08.026 ↗
4. Impedance response of photoelectrochemical sensor and size-exclusion filter and catalytic effects in Mn3(BTC)2/g-C3N4 /TiO2 nanotubes10.1016/j.electacta.2017.06.084 ↗
5. A novel signal-on photoelectrochemical immunosensor for detection of alpha-fetoprotein by in situ releasing electron donor10.1016/j.bios.2017.06.047 ↗
6. Photoelectrochemical sensing of hydrogen peroxide at zero working potential using a fluorine-doped tin oxide electrode modified with BiVO4 microrods10.1007/s00604-016-2071-5 ↗
7. Templated electrodeposition and photocatalytic activity of cuprous oxide nanorod arrays10.1021/am507244q ↗
8. Chemically assembled light harvesting CuOx–TiO2 p–n heterostructures10.1016/j.cej.2015.06.098 ↗
9. Direct Synthetic control over the size, composition, and photocatalytic activity of octahedral copper oxide materials: correlation between surface structure and catalytic functionality10.1021/acsami.5b04282 ↗
10. CuO nanowire/microflower/nanowire modified Cu electrode with enhanced electrochemical performance for non-enzymatic glucose sensing10.1088/0957-4484/26/30/305503 ↗
11. Electrodeposition of Cu2O: growth, properties, and applications10.1007/s10008-017-3660-x ↗
12. Colloidal synthesis of cuprite (Cu2O) octahedral nanocrystals and their electrochemical lithiation10.1021/am4004073 ↗
13. Direct growth of pod-like Cu2O nanowire arrays on copper foam: Highly sensitive and efficient nonenzymatic glucose and H2O2 biosensor10.1016/j.snb.2016.03.058 ↗
14. Direct electrodeposition of cable-like CuO@Cu nanowires array for non-enzymatic sensing10.1016/j.talanta.2014.10.027 ↗
15. Formation of CuO nanorods and their bundles by an electrochemical dissolution and deposition process10.1016/j.jallcom.2010.12.180 ↗
16. Growth and sensing properties of networked p-CuO nanowires10.1016/j.snb.2014.12.081 ↗
17. Alcohol oxidase protein mediated in-situ synthesized and stabilized gold nanoparticles for developing amperometric alcohol biosensor10.1016/j.bios.2015.02.015 ↗
18. The application of power-generating fuel cell electrode materials and monitoring methods to breath alcohol sensors10.1016/j.snb.2016.01.061 ↗
19. Carbon sphere-assisted preparation of TiO2 hollow nanospheres and its electrocatalytic reduction of H2O2, oxidation of antioxidants and ethanol sensor10.1007/s10008-013-2065-8 ↗
20. Characterization of a carbon xerogel-based sensor for detection of acetone, ethanol, and methanol vapors10.1016/j.snb.2016.03.054 ↗
21. Microwave-based sensors with phthalocyanine films for acetone, ethanol and methanol detection10.1016/j.snb.2016.06.168 ↗
22. N-hydroxysuccinimide-mediated photoelectrooxidation of aliphatic alcohols based on cadmium telluride nanoparticles decorated graphene nanosheets10.1016/j.electacta.2013.04.151 ↗
23. A novel amperometric alcohol biosensor developed in a 3rd generation bioelectrode platform using peroxidase coupled ferrocene activated alcohol oxidase as biorecognition system10.1016/j.bios.2013.12.005 ↗
24. Pd/Ni/Si-microchannel-plate-based amperometric sensor for ethanol detection10.1016/j.electacta.2011.01.096 ↗
25. Pd–Ni–Cu–P metallic glass nanowires for methanol and ethanol oxidation in alkaline media10.1016/j.ijhydene.2013.06.017 ↗
26. Photo enhanced methanol electrooxidation: further insights into Pt and TiO2 nanoparticle contributions10.1016/j.apcatb.2017.03.027 ↗
27. Reactive plasma deposition of high quality single phase CuO thin films suitable for metal oxide solar cells10.1016/j.jallcom.2016.11.338 ↗
28. Structure and size effect of CuO nanowires prepared by low temperature solid-phase process10.1016/j.matlet.2007.09.086 ↗
29. Surfactant assisted chemical bath deposition based synthesis of 1-D nanostructured CuO thin films from alkaline baths10.1016/j.mssp.2017.05.007 ↗
30. Synthesis of pod-like Cu2O nanowire arrays on Cu substrate10.1016/j.matlet.2014.01.107 ↗
31. Spontaneous formation of CuO nanosheets on Cu foil for H2O2 detection10.1016/j.apsusc.2015.05.141 ↗
32. Synthesis, characterization and DFT studies of zinc-doped copper oxide nanocrystals for gas sensing applications10.1039/C6TA01355D ↗
33. Seed-mediated synthesis of ultra-long copper nanowires and their application as transparent conducting electrodes10.1016/j.apsusc.2017.06.051 ↗
34. Enhanced ethanol vapour sensing performances of copper oxide nanocrystals with mixed phases10.1016/j.snb.2015.10.042 ↗
35. Phase transition of Cu2O to CuO nanocrystals by selective laser heating10.1016/j.mssp.2016.01.021 ↗
36. Free-standing CuO nanoflake arrays coated Cu foam for advanced lithium ion battery anodes10.1016/j.jpowsour.2016.09.154 ↗
37. Photocatalytic activity of CuO and Cu2O nanowires10.1016/j.mssp.2015.08.008 ↗
38. Direct electrodeposition of cable-like CuO@Cu nanowires array for non-enzymatic sensing10.1016/j.talanta.2014.10.027 ↗
39. Enzyme-free ethanol sensor based on electrospun nickel nanoparticle-loaded carbon fiber paste electrode10.1016/j.aca.2010.01.061 ↗