Effect of the substrate temperature on the electrical and structural properties of spray-deposited SnO2:F thin films
Source abstract
Abstract
Abstract SnO 2 :F thin films were prepared by the spray pyrolysis (SP) technique at substrate temperature in the range 360–480 °C. The effect of varying the substrate temperature on the electrical and structural properties of the films was investigated by studying the I–V characteristics, the X-ray diffraction patterns (XRD), and the scanning electron microscope images (SEM). The I–V characteristics of the films were improved by increasing the substrate temperature, i.e. the resistivity of the films had decreased from 98 to 0.22 Ω cm. The X-ray diffraction patterns taken at 400 and 480 °C showed that the films are polycrystalline and two directions of crystal growth appeared in the difractogram of the film deposited at the lower substrate temperature, which correspond to the reflections from the (1 1 0) and (2 0 0) planes. With the increase in the substrate temperature a new direction of crystal growth appeared, which corresponds to the reflection from the (1 0 1) plane. Also the (1 1 0) and (2 0 0) lines were slightly grown at the higher substrate temperature, which means the crystal growth was enhanced and the grain size had increased. The SEM images confirmed these results and showed larger grains and more crystallization for the higher substrate temperature too.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Transport properties of polycrystalline tin oxide films10.1016/0927-0248(92)90009-E ↗
2. Structural properties of SnO2:F films deposited by spray pyrolysis technique10.1016/0040-6090(88)90146-0 ↗
3. Performance and characteristics of Al-PbS/SnO2:F selective coating system for photothermal energy conversion10.1016/0165-1633(90)90062-6 ↗
4. Electronic and optical properties of fluorine-doped tin oxide films10.1063/1.366796 ↗
5. Ikhmayies J Shadia. Production and characterization of CdS/CdTe thin film photovoltaic solar cells of potential industrial use. PhD thesis. University of Jordan, 2002.
6. Preparation and characterization of SnO2 thin films deposited by spray pyrolysis from SnCl2 and SnCl4 precursors10.1016/0040-6090(94)90826-5 ↗
7. Electrical and optical properties of tin oxide films doped with F and (Sb+F)10.1063/1.330619 ↗
8. Preparation and characterization of nitrogen-incorporated SnO2 Films10.1007/s00339-006-3659-0 ↗
9. Montmeat P. Thin film membranes for the improvement of gas sensor selectivity, Doctorate thesis. École Nationale Supérieure des Mines de Saint-Étienne (ENSMSE): a graduate school for science and technology. France, 1999.
10. Sundqvist Jonas and Hårsta Anders. Growth of SnO2 thin films by ALD and CVD: a comparative study. Proceedings of the sixteenth International CVD Conference. 2003. Paris, France, Vol. 1, p. 511
11. Sb doping effect and oxygen adsorption in SnO2 thin films deposited via sol–gel10.1590/S1516-14392003000400004 ↗
12. Electrical and optical properties of undoped and antimony-doped tin oxide films10.1063/1.327610 ↗
13. Electrical and optical properties of pyrolytically electrostatic sprayed fluorine-doped tin-oxide: dependence on substrate-temperature and substrate-nozzle distance10.1063/1.373020 ↗
14. Effect of processing on the electrical properties of spray-deposited SnO2:F thin films10.3844/ajassp.2008.672.677 ↗
15. Correlation between structural and electrical properties of sprayed tin oxide films with and without fluorine doping10.1016/0040-6090(91)90226-N ↗
16. Electronic conduction of tin oxide thin films prepared by chemical vapor deposition10.1063/1.341741 ↗