journal article·2021-01

Materials studies of copper oxides obtained by low temperature oxidation of copper sheets

Z. Starowicz, K. Gawlińska – Nęcek, R.P. Socha, T. Płociński, J. Zdunek, M.J. Szczerba, P. Panek

Publisher page

Abstract

Abstract Inexpensive and stable solar cells based on oxide materials are currently strongly investigated. The surest candidates are copper oxides, which unlike to other metal oxides display strong absorption across the visible range. Although, copper oxides thin film can be deposited by the number of methods, cost effective techniques applicable for large scale production are necessary. Therefore, the main focus of this paper was turned to the simple and time effective thermal oxidation of copper sheets using relatively low temperatures 200–400 °C. The surface pretreatment was selected in order to support homogeneous growth conditions. The basic material research presented here included the morphological, compositional and microstructural aspects of grown copper oxides. The surface roughness of manufactured layers for investigated temperature range was described either by AFM microscopy where Ra was assessed between 8.9 and 67.6 nm and also by the optical method where calculated haze factor ranged from 34 to 79.3%. Microstructure and phase composition studies were performed by means of TEM and XRD supplemented by XPS surface analysis confirming the dominating phase of copper (I) oxide capped with thin surface CuO layer. Finally, the optical properties were described allowing to determine the sample absorptivity and band gap energy varying in the range 2.43–1.93 eV.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Electrical resistivity of copper, gold, palladium and silver10.1063/1.555614 ↗
2. Current status and future prospects of copper oxide heterojunction solar cells10.3390/ma9040271 ↗
3. Effect of Mg doping on Cu2O thin films and their behavior on theTiO2/Cu2O heterojunction solar cells10.1016/j.solmat.2015.11.041 ↗
4. Cu2O layer analysis and optimization based on a metal-oxide tandem heterojunction solar cell
5. Origins of the p-type nature and cation deficiency in Cu2O and related materials10.1103/PhysRevB.76.045209 ↗
6. Nonstoichiometry and electrical conduction of CuO10.1016/0022-3697(95)00130-1 ↗
7. Annealing effects on the properties of copper oxide thin films prepared by chemical deposition”10.1016/S1452-3981(23)19665-9 ↗
8. Crystallization and electrical resistivity of Cu2O and CuO obtained by thermal oxidation of Cu thin films on SiO2/Si substrates10.1016/j.tsf.2012.06.043 ↗
9. Production of cuprous oxide, a solar cell material, by thermal oxidation and a study of its physical and electrical properties”10.1016/S0927-0248(97)00233-X ↗
10. D-J. Kim, H-J. Kim, K-W. Seo, K-H. Kim, T-W. Kim, H-K. Kim, “Indium-free, highly transparent,flexible Cu2O/Cu/Cu2O mesh electrodes for flexible touch screen panels”, Nature, Scientific Reports, DOI: 10.1038/srep16838, p. 1-10..10.1038/srep16838 ↗
11. Hall mobility of cuprous oxide thin films deposited by reactive direct-current magnetron sputtering”10.1063/1.3589810 ↗
12. The novel transparent sputtered p-type CuO thin films and Ag/p-CuO/n-Si Schottky diode applications10.1016/j.rinp.2015.11.001 ↗
13. Growth of Cu2O thin films with high hole mobility by introducing a low-temperature buffer layer10.1016/j.jcrysgro.2008.11.038 ↗
14. Metal oxide thin-film heterojunction for photovoltaic application10.3390/ma11122593 ↗
15. Formation of all-oxide solar cells in atmospheric condition based on Cu2O thin-films grown through SILAR technique10.1016/j.solmat.2015.11.045 ↗
16. Spray deposited nanostructured CuO thin films: influence of substrate temperature and annealing process
17. Copper oxide thin films prepared by chemical vapor deposition from copper dipivaloylmethanate10.1016/S0927-0248(98)00128-7 ↗
18. Atomic layer deposited p-type copper oxide thin films and the associated thin film transistor properties10.1016/j.ceramint.2015.12.109 ↗
19. Atomic layer deposition of photoconductive Cu2O thin films10.1021/acsomega.9b01351 ↗
20. Microstructures and photovoltaic properties of Zn(Al)O/Cu2O-based solar cells prepared by spin-coating and electrodeposition10.3390/coatings4020203 ↗
21. Amelioration of ultrasonic transducer to study CuO doped thin films
22. Cuprous oxide thin films grown by hydrothermal electrochemical deposition technique10.1016/j.tsf.2015.07.002 ↗
23. Copper oxide based nanostructures for improved solar cell efficiency10.1016/j.tsf.2014.09.056 ↗
24. Oxidation mechanism of thin Cu films: a gateway towards the formation of single oxide phase10.1063/1.5028407 ↗
25. Efficiency improvement of Cu2O-based heterojunction solar cells fabricated using thermally oxidized copper sheets10.1016/j.tsf.2013.11.026 ↗
26. Thermal oxidation of copper over a broad temperature range: towards the formation of cupric oxide (CuO)10.1088/2053-1591/ab1662 ↗
27. Thin cuprous oxide films prepared by thermal oxidation of copper foils with water vapor10.1016/j.tsf.2011.11.037 ↗
28. Size effect of the thermal expansion of nanostructural copper oxide10.1134/S1063783408040264 ↗
29. Palik · 1985
30. Investigation of the Zn and Cu oxides for heterojunction thin film solar cell application10.1016/j.mee.2019.111196 ↗
31. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
32. Wagner · 2003
33. Surface oxidation and reduction of CuO and Cu2O studied using XPS and XAES10.1002/(SICI)1096-9918(199611)24:12<811::AID-SIA191>3.0.CO;2-Z ↗
34. R. Berriche; R. Lowry; M.I. Rosenfield, An oxidation study of Cu leadframes, Proceedings International Symposium on Advanced Packaging Materials. Processes, Properties and Interfaces (IEEE Cat. No.99TH8405), 10.1109/ISAPM.1999.757326.
35. Heterojunction solar cell with 6% efficiency based on an n-type aluminum–gallium–oxide thin film and p-type sodium-doped Cu2O sheet