Controlling of surface morphology of ZnO nanopowders via precursor material and Al doping
Source abstract
Abstract
Abstract In this paper, the optimization studies on the structural, morphological and electrical properties of undoped and Al doped ZnO nanopowders by microwave assisted hydrothermal method were performed. The ZnO nanopowders were prepared in different zinc acetate and NaOH molarities and after the determination of the best powder conditions, Al doped ZnO powders were obtained under these conditions. The surface morphology of ZnO nanoparticles is influenced by the starting solution type and molarity. Different morphologies of ZnO microstructures were obtained by adjusting the concentration of Zn2+ and OH−. The structural, morphological, electrical and optical properties of these nanopowders were investigated using X-ray diffractometer, scanning electron microscopy, DC electrical measurements and reflectance measurements. The incorporation of Al in ZnO nanopowder was also changed the morphology of these powders. The presence of Al+3 ions in ZnO nanopowder was determined by XPS measurements. Conductivity and resistivity values of ZnO nanopowders varied with Al incorporation. As the amount of Al in ZnO increases, their resistivities have decreased and their conductivities have increased. The optical band values of Al doped ZnO nanopowders were found via reflectance measurements using kubelka-munk function. As a result of Burstein-moss effect, the optical band values increased with the increase of the Al dopant.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Selective solid-phase microextraction of ultraviolet filters in environmental water with oriented ZnO nanosheets coated nickel-titanium alloy fibers followed by high performance liquid chromatography with UV detection10.1016/j.talanta.2018.08.060 ↗
2. Band structure engineering of 2D materials using patterned dielectric superlattices10.1038/s41565-018-0138-7 ↗
3. High-performance ZnO:Ga/Ag/ZnO:Ga multilayered transparent electrodes targeting large-scale perovskite solar cells10.1016/j.solmat.2018.07.010 ↗
4. High-efficiency ZnO/NiO composite photoanodes with Zn(Ac)2 ethanol solution-processed for dye-sensitized solar cells10.1016/j.jallcom.2018.06.226 ↗
5. The role of Ce doping in enhancing sensing performance of ZnO-based gas sensor by adjusting the proportion of oxygen species10.1016/j.snb.2018.05.167 ↗
6. Facile fabrication and superior gas sensing properties of spongelike Co-doped ZnO microspheres for ethanol sensors10.1016/j.ceramint.2018.06.110 ↗
7. Effect of spark plasma sintering on microstructure and electrical properties of ZnO-based varistors10.1007/s10854-018-9713-9 ↗
8. Improving electrical properties of multiple dopant ZnO varistor by doping with indium and gallium10.1016/j.ceramint.2017.07.173 ↗
9. The surface morphology properties and respond illumination impact of ZnO/n-Si photodiode by prepared atomic layer deposition technique10.1016/j.jallcom.2016.08.295 ↗
10. Influence of irradiation time on structural, morphological properties of ZnO-NRs films deposited by MW-CBD and their photodiode applications
11. Effect of channel thickness on the field effect mobility of ZnO-TFT fabricated by sol gel process10.1016/j.jallcom.2014.09.190 ↗
12. Direct catalyst-free self-assembly of large area of horizontal ferromagnetic ZnO nanowire arrays10.1016/j.matlet.2018.09.145 ↗
13. Magnesium-doped zinc oxide nanorod–nanotube semiconductor/p-silicon heterojunction diodes10.1007/s00339-016-0251-0 ↗
14. Morphology-controlled ZnO spherical nanobelt-flower arrays and their sensing properties10.1016/j.snb.2012.11.088 ↗
15. Optical and structural properties of Al2O3 doped ZnO nanotubes prepared by ALD and their photocatalytic application10.1016/j.surfcoat.2017.11.060 ↗
16. The correlation among morphology, oxygen vacancies and properties of ZnO nanoflowers10.1007/s10854-018-9483-4 ↗
17. Effects of octadecylammine molar concentration on the structure, morphology and optical properties of ZnO nanostructure prepared by homogeneous precipitation method10.1016/j.jlumin.2018.04.024 ↗
18. Surfactant assisted solvothermal synthesis of ZnO nanoparticles and study of their antimicrobial and antioxidant properties10.1016/j.jmst.2017.09.014 ↗
19. Refluxed sol--gel synthesized ZnO nanopowder with variable zinc precursor concentrations10.1007/s00339-018-2148-6 ↗
20. Controlling the morphology of ZnO structures via low temperature hydrothermal method and their optoelectronic application10.1016/j.mssp.2018.09.007 ↗
21. Synthesis of morphology-controlled ZnO microstructures via a microwave-assisted hydrothermal method and their gas-sensing property10.1016/j.ultsonch.2014.02.007 ↗
22. Morphology-photocatalytic properties-growth mechanism for ZnO nanostructures via microwave-assisted hydrothermal synthesis10.1002/crat.201300026 ↗
23. Structure and properties variations in Zn1−xCoxO nanorods prepared by microwave-assisted hydrothermal method10.1016/j.mssp.2016.10.041 ↗
24. Preparation and photocatalytic properties of hexagonal-shaped ZnO:Sm3+ by microwave-assisted hydrothermal method10.1007/s10854-017-6496-3 ↗
25. Microwave-assisted hydrothermal synthesis of Cu-doped ZnO single crystal nanoparticles with modified photoluminescence and confirmed ferromagnetism10.1007/s11664-017-5928-4 ↗
26. Effect of barium doping on structural and optical properties of zinc oxide nanoparticles synthesized by microwave hydrothermal method10.1002/pssb.201552177 ↗
27. Effect of synthesis conditions on the growth of ZnO nanorods via hydrothermal method10.1016/j.physb.2008.06.020 ↗
28. Effect of NaOH molar concentration on optical and ferroelectric properties of ZnO nanostructures10.1016/j.apsusc.2015.08.107 ↗
29. Influence of Al doping on microstructure, morphology, optical and photoluminescence properties of pyrolytic ZnO thin films prepared in an ambient atmosphere10.1016/j.cjph.2018.07.004 ↗
30. The influence of Al doping on the photocatalytic activity of nanostructured ZnO: the role of adsorbed water10.1016/j.apsusc.2018.03.141 ↗
31. Tuning the visible photoluminescence in Al doped ZnO thin film and its application in label-free glucose detection10.1016/j.snb.2017.07.110 ↗
32. Effect of Nb on the structural, optical and photocatalytic properties of Al-doped ZnO thin films fabricated by the sol-gel method10.1016/j.ceramint.2018.07.311 ↗
33. Influence of Al doping on the structural, morphological, optical, and gas sensing properties of ZnO nanorods10.1016/j.jallcom.2016.12.187 ↗
34. Improvement of ZnO nanorod-based dye-sensitized solar cell efficiency by Al-doping10.1016/j.jpcs.2010.08.020 ↗
35. Radiation through a foggy atmosphere10.1086/141186 ↗
36. Ein beitrag zur optik der farbanstriche