journal article·2019-03

Structural and optical temperature-dependent properties of PbS thin films deposited by radio frequency sputtering

José Maria Clemente da Silva Filho, Francisco Chagas Marques

Publisher page

Abstract

Abstract Lead sulfide (PbS) thin films deposited by radio frequency (RF) sputtering, in the 50–300 °C temperature range, were the subject of our investigation. We characterized the influence of deposition temperature on their structural, morphological, and optical properties by x-ray diffraction (XRD), atomic force microscopy (AFM), and UV–visible and Raman spectroscopy. XRD revealed that a transition from an amorphous to a crystalline structure occurs in the 200–250 °C temperature range. One was also able to observe an increase in grain size (determined by AFM), as the temperature increased. We also found that a broad range of band gaps (from 0.72 eV to 2.12 eV) might also be obtained by varying the deposition temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Electronic structure calculations of lead chalcogenides PbS, PbSe, PbTe10.1016/S0022-3697(01)00237-2 ↗
2. PbS in polymers. From molecules to bulk solids10.1063/1.453325 ↗
3. Vibronic quantum beats in PbS microcrystallites10.1103/PhysRevB.48.2819 ↗
4. Studies on PbS and PbSe detectors for IR system10.1023/A:1006676029014 ↗
5. Synthesis and characterization of PbS mesostructures as an IR detector grown by hydrogen-assisted thermal evaporation10.1016/j.mssp.2014.08.026 ↗
6. Electrochemical processes of H2S detection in air and solution10.1007/s10008-002-0311-6 ↗
7. Fabrication and liquefied petroleum gas (LPG) sensing performance of p-polyaniline/n-PbS heterojunction at room temperature10.1016/j.snb.2011.04.005 ↗
8. Harnessing sun's energy with quantum dots based next generation solar cell10.3390/nano3010022 ↗
9. Metal halide solid-state surface treatment for high efficiency PbS and PbSe QD solar cells10.1038/srep09945 ↗
10. PbS nanocrystal solar cells fabricated using microwave-assisted chemical bath deposition10.1016/j.ijhydene.2012.10.046 ↗
11. Colloidal quantum dot solids for solution-processed solar cells10.1038/nenergy.2016.16 ↗
12. Perovskite thin film synthesised from sputtered lead sulphide10.1038/s41598-018-19746-8 ↗
13. Growth of Perovskite nanorods from PbS quantum dots
14. Perovskite thin films via atomic layer deposition10.1002/adma.201403965 ↗
15. Comparative studies on the structural, morphological, optical, and electrical properties of nanocrystalline PbS thin films grown by chemical bath deposition using two different bath compositions10.1016/j.mssp.2013.11.028 ↗
16. Structural and optical properties of PbS thin films deposited by chemical bath deposition10.1016/j.matchemphys.2005.07.061 ↗
17. Six complexing agents and their effects on optical, structural, morphological and photoluminescence properties of lead sulphide thin films prepared by chemical route10.1016/j.jlumin.2018.05.004 ↗
18. Direct synthesis of high-density lead sulfide nanowires on metal thin films towards efficient infrared light conversion10.1088/0957-4484/23/26/265602 ↗
19. Spray pyrolytically deposited PbS thin films10.1088/0268-1242/15/8/311 ↗
20. Tuning the physical properties of PbS thin films towards optoelectronic applications through Ni doping10.1016/j.ijleo.2016.06.106 ↗
21. Characterization of vacuum evaporated PbS thin films10.1016/S0921-4526(02)01272-3 ↗
22. Effect of annealing temperature on optical and electrical properties of lead sulfide thin films10.1016/j.mssp.2015.07.039 ↗
23. Study of the structural properties of nanostructured PbS thin films deposited by RF sputtering at room temperature10.1088/2053-1591/aadac0 ↗
24. Atomic layer deposition of lead sulfide thin films for quantum confinement10.1021/cm901228x ↗
25. Chemical bath deposition
26. Deposition of Cu-doped PbS thin films with low resistivity using DC sputtering10.1016/j.rinp.2018.01.020 ↗
27. Study on the growth mechanism and optical properties of sputtered lead selenide thin films10.1016/j.apsusc.2015.08.195 ↗
28. Morphological evolution and growth mechanism of hierarchical structure of PbTe films grown by off-axis magnetron co-sputtering10.1016/j.apsusc.2014.10.027 ↗
29. Nanocomposites composed of P3HT: PCBM and nanoparticles synthesized by laser ablation of a bulk PbS target in liquid10.1007/s00396-014-3397-3 ↗
30. Hammond · 2009
31. Perovskite-inspired photovoltaic materials: toward best practices in materials characterization and calculations10.1021/acs.chemmater.6b03852 ↗
32. First- and second-order Raman spectra of galena (PbS)10.1063/1.1505670 ↗
33. Growth and photoluminescence properties of PbS nanocubes10.1088/0957-4484/17/13/034 ↗
34. High yield synthesis of matchstick-like PbS nanocrystals using mesoporous organosilica as template10.1039/C0NR00741B ↗
35. Vibrational spectroscopy on the PbO-PbSO4 system and some related compounds10.1016/0924-2031(93)87058-2 ↗
36. Microscopic and imaging Raman scattering study of PbS and its photo-oxidation products10.1002/1097-4555(200012)31:12<1113::AID-JRS653>3.0.CO;2-E ↗
37. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
38. Wide band gap amorphous silicon thin films prepared by chemical annealing10.1063/1.369165 ↗
39. Structural, optical, and electrical characterization of improved amorphous hydrogenated germanium10.1063/1.344533 ↗
40. The optical constants of lead sulphide and lead telluride in the region 0.5–3 μm10.1088/0370-1301/64/12/111 ↗
41. Dispersion of the refractive index near the fundamental absorption edge in PbS10.1103/PhysRev.131.2082 ↗