Effect of anionic bath temperature on morphology and photo electrochemical properties of Cu2O deposited by SILAR
Source abstract
Abstract
Abstract Successive ionic layer adsorption and reaction (SILAR) technique with different anionic bath temperatures (40 °C, 60 °C, 80 °C) was used to deposit Cu 2 O films on ITO substrate. Studies carried out and reported in this work are crystal structure of Cu 2 O (XRD), transmittance, optical band gap, surface morphological of Cu 2 O and photocatalytic activity of deposited Cu 2 O films. The structural study revealed that the crystalline quality was gradually enhanced with increase in bath temperature and preferential orientation of crystal structure is along (111) that is cubic nature. Optical study for Cu 2 O film shows that anionic bath temperature influences the transmittance and optical band gap of deposited Cu 2 O samples. SEM images revealed that the morphology for Cu 2 O film deposited on ITO substrate were of nanowire like structures and with increase in temperature of anionic bath wire structure grows more compact. Photoelectrochemical (PEC) studies revealed that Cu 2 O deposited at 80 °C shows high photocurrent and good stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Influence of aging time of the starting solution on the physical properties of fluorine doped zinc oxide films deposited by a simplified spray pyrolysis technique10.1016/j.spmi.2012.02.006 ↗
2. Optically stimulated piezooptical effects in Cu-doped ZnO films10.1016/j.ijleo.2013.05.128 ↗
3. Effect of source material on the transparent conducting properties of sprayed ZnO:Al thin films for solar cell applications10.1016/j.jpcs.2013.01.029 ↗
4. Low cost inorganic white light emitting diode based on submicron ZnO rod arrays and electrodeposited Cu2O thin film10.1016/j.mssp.2018.03.004 ↗
5. A review of recent advances in transparent p-type Cu2O-based thin film transistors10.1016/j.mssp.2015.06.063 ↗
6. Identifying champion nanostructures for solar water-splitting10.1038/nmat3684 ↗
7. Enhanced catalytic activity in strained chemically exfoliated WS2nanosheets for hydrogen evolution10.1038/nmat3700 ↗
8. Highly active oxide photocathode for photoelectrochemical water reduction10.1038/nmat3017 ↗
9. Ultrathin films on copper(i) oxide water splitting photocathodes: a study on performance and stability10.1039/c2ee22063f ↗
10. Xing · 2015 · 143902 · 1
11. Photocatalytic activity of CuO and Cu2O nanowires10.1016/j.mssp.2015.08.008 ↗
12. Electrochemical synthesis of p-Cu2O/n-TiO2heterojunction electrode with enhanced photoelectrocatalytic activity10.1016/j.mssp.2017.10.049 ↗
13. High electrochemical performance of nanoflakes like CuO electrode by successive ionic layer adsorption and reaction (SILAR) method10.1016/j.jiec.2017.03.049 ↗
14. Understanding of water-assisted template-free synthesis of Cu2O microrods10.1016/j.matlet.2017.11.071 ↗
15. Cu2O as a potential intermediate transparent conducting oxide layer for monolithic perovskite-CIGSe Tandem solar cells
16. Effect of Different HTM Layers and Electrical Parameters on ZnO Nanorod-Based Lead Free Perovskite Solar Cell for High-Efficiency Performance10.1155/2017/9846310 ↗
17. A single-step hydrothermal route to 3D hierarchical Cu 2 O/CuO/rGO nanosheets as high-performance anode of lithium-ion batteries
18. Cu2O NPs/Bi2O2CO3flower-like complex photocatalysts with enhanced visible light photocatalytic degradation of organic pollutants10.1016/j.cattod.2017.01.032 ↗
19. Synthesis and characterization of novel Cu2O/PVDF nanocomposites for flexible ferroelectric organic electronic memory devices10.1016/j.cap.2017.05.011 ↗
20. Possibility of selective and morphology-controlled growth of CuO and Cu2O films10.1016/j.tsf.2017.08.054 ↗
21. Fabrication of TiO2/Cu2O heterojunction solar cells by electrophoretic deposition and electrodeposition10.1016/j.mssp.2013.05.004 ↗
22. Enhancement of short-circuit current density in Cu2O/ZnO heterojunction solar cells10.1016/j.jallcom.2016.11.119 ↗
23. Extended light harvesting with dual Cu2O-based photocathodes for high efficiency water splitting
24. Synthesis and characterization of Cu2O nanowires array via an anodic oxidation method10.1016/j.matlet.2017.09.120 ↗
25. Effect of strontium incorporation on the p-type conductivity of Cu2O thin films deposited by metal-organic chemical vapor deposition10.1021/acs.jpcc.6b05479 ↗
26. Interfacial study of Cu2O/Ga2O3 /AZO/TiO2 photocathode for water splitting fabricated by pulsed laser deposition10.1039/C7CY00040E ↗
27. he n-type conduction of indium-doped Cu2O thin films fabricated by direct current magnetron co-sputtering
28. TiO2/Cu2O all-oxide heterojunction solar cells produced by spray pyrolysis10.1016/j.solmat.2014.10.005 ↗
29. Cu2O thin films obtained from sol-gel cuo films using a simple argon/dry-air microwave plasma10.1016/j.mssp.2017.10.036 ↗
30. Cu2O thin films prepared using modified successive ionic layer adsorption and reaction method and their use in photoelectrochemical solar cells10.1007/s10854-015-3970-7 ↗
31. Morphology, bandgap, and grain size tailoring in Cu2O thin film by SILAR method10.1109/TNANO.2014.2369438 ↗
32. Studies on SILAR deposited Cu2O and ZnO films for solar cell applications10.1007/s10854-015-3020-5 ↗