journal article·2005-01

Ultra-short pulsed laser deposition and patterning of SiC thin films for MEMS fabrication

Monica Vendan, Pal Molian, Ashraf Bastawros, James Anderegg

Publisher page

Abstract

A Ti:Sapphire (IR 800-nm) femtosecond (fs) pulsed laser was used to ablate a sputtering grade of silicon carbide (SiC) in an ultra-high vacuum chamber. The laser-induced plasma species were then driven and grown to form 3C-SiC films of about 1 μm thick on single crystal silicon wafers at 20 °C (room temperature) and 500 °C. Scanning electron microscopy, atomic force microscopy, X-ray photoelectron microscopy, X-ray diffraction and nanoindentation were used to characterize the structure, composition, thickness and properties of the SiC films. Results of the femtosecond-pulse laser deposited (fs-PLD) films were compared with those obtained by atmospheric pressure chemical vapor deposition (APCVD) and nanosecond-pulse laser (excimer laser at 248-nm) deposition (ns-PLD). The distinctive features of fs-PLD films are their extremely smooth surfaces, stoichiometry, amorphous structure and low defect density compared to APCVD films, along with better film quality and higher growth rates than ns-PLD films. In addition to film growth studies, a SiC microgripper (to grab 20-μm-sized objects) was micromachined by use of the fs-pulsed laser to demonstrate the utility of ultra-short PLD in SiC-device fabrication.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Fabrication and characterization of single-crystal silicon carbide MEMS
2. The preparation of single-crystal 4H-SiC film by pulsed XeCl laser deposition10.1016/S0040-6090(98)01004-9 ↗
3. Maley S, Romanosky R, Chen Z.-Y. Sensors and controls workshop: summary report, DOE/NETL, November 2001.10.2172/789332 ↗
4. A. Atwell, E. Hailu, C. Li, J.S. Duster, K. Kornegay, Integrated MEMS pressure sensor in 6H-SiC, NNUN Abstracts, Mechanical & MEMS Devices, 2002. p. 69.
5. Ned A, Okojie RS, Kurtz AD. 6H-SiC pressure sensor operation at 600°C. In: Transactions of the fourth international conference on HITEC, Albuquerque, NM, USA, 1998. p. 257.10.1109/HITEC.1998.676799 ↗
6. Korlyakov AV. Silicon carbide pressure microsensor. In: Transactions of the third international conference on HITEC, Albuquerque, NM, USA, 1996. p. 29.
7. von Berg J, Ziemann R, Reichert W, Obermeier E, Eickhoff M, Kroetz G, Thoma U, Cavalloni C, Nendza JP. Measurement of the cylinder pressure in combustion engines with a piezoresistive β-SiC-on-SOI pressure sensor. In: Transactions of the fourth international conference on HITEC, Albuquerque, NM, USA, 1998. p. 245.10.1109/HITEC.1998.676796 ↗
8. Zappe S, Franklin J, Obermeier E, Eickhoff M, Moeller H, Kroetz G, Rougeot C, Lefort O, Stoemenos J. High temperature 10bar pressure sensor based on 3C-SiC/SOI for turbine control applications. In: Conference Proceedings of the ECSCRM2000, Kloster Banz, German, 2000.10.4028/www.scientific.net/MSF.353-356.753 ↗
9. Zappe S, Obermeier E, Eickhoff M, Moeller H, Kroetz G, Bonnotte E, Barriol Y, Decorps JL, Rougeot C, Lefort O, Stoemenos J. Piezoresistive high pressure sensor based on 3C-SiC-on-SOI for oil well logging applications. In: Transactions of the fifth international conference on HITEC, Albuquerque, NM, USA, 2000.
10. Sivaram S. Chemical vapor deposition-thermal and plasma deposition of electronic materials. Dordrecht: Kluwer Academic Publishers; 1994.
11. Madou · 2003
12. Epitaxial growth of 3C-SiC films on 4 in Diam (100) Silicon wafers by atmospheric pressure chemical vapor deposition10.1063/1.359745 ↗
13. Thin film growth by the pulsed laser assisted deposition technique10.1016/0169-4332(95)00535-8 ↗
14. Pulsed laser vaporization and deposition10.1103/RevModPhys.72.315 ↗
15. Pulsed laser deposition part I a review of process characteristics and capabilities
16. Chrisey · 1994 · vol. 1
17. Femtosecond pulsed laser ablation and deposition of thin films of polytetrafluoroethylene10.1016/S0169-4332(03)00835-3 ↗
18. Excimer laser induced thermal evaporation and ablation of silicon carbide10.1016/0169-4332(95)00434-3 ↗
19. Fabrication of novel 22GHz hairpin type HTS microstrip filter using laser ablated thin films10.1016/S0169-4332(00)00773-X ↗
20. Superconducting and electro-optical thin films prepared by pulsed laser deposition technique10.1016/S0169-4332(00)00599-7 ↗
21. http://www.pcgg.de/download/publication4.pdf, Pulsed laser deposition (PLD)—a versatile thin film technique.
22. Generation of ultrahigh peak power pulses by chirped pulse amplification10.1109/3.137 ↗
23. Deposition of polycrystalline 3C-SiC films on 100mm diameter (100) Si wafers in a large-volume LPCVD furnace10.1149/1.1506461 ↗
24. Pulsed laser deposition of silicon carbide at room temperature10.1063/1.111257 ↗
25. Laser reactive ablation deposition of silicon carbide films10.1016/0169-4332(95)00568-4 ↗
26. Studies on SiC film deposited by pulsed XeCl excimer laser sputtering method10.1016/S0921-4526(96)00499-1 ↗
27. Characterization of crystalline SiC films grown by pulsed laser deposition10.1016/S0040-6090(00)00991-3 ↗
28. Optical characterization of pulsed laser deposited SiC films10.1016/S0169-4332(99)00410-9 ↗
29. Deposition of SiC and A1N thin films by laser ablation10.1016/S0169-4332(98)00451-6 ↗
30. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
31. Polysilicon microgripper10.1016/0924-4247(92)80169-4 ↗
32. The effect of particulate density on performance of Nd:Gd3Ga5O12 waveguide lasers grown by pulsed laser deposition10.1016/S0030-4018(00)00999-8 ↗
33. Laser deposition of diamond-like carbon films at high intensities10.1063/1.114853 ↗
34. Femtosecond laser ablation of frozen acetone for deposition of diamond-like carbon films10.1063/1.370962 ↗
35. Deposition of diamond-like carbon films by femtosecond laser ablation using frozen acetone targets10.1016/S0169-4332(99)00378-5 ↗
36. Growth of heteroepitaxial ZnO thin films by femtosecond pulsed-laser deposition10.1063/1.1324679 ↗
37. Pulsed laser deposition of ZnO thin films using a femtosecond laser10.1016/S0169-4332(99)00392-X ↗
38. Epitaxial nanocrystalline tin dioxide thin films grown on (0001) sapphire by femtosecond pulsed laser deposition10.1063/1.1386406 ↗
39. Epitaxial SnO2 thin films grown on (1012) sapphire by femtosecond pulsed laser deposition10.1063/1.1426245 ↗
40. Observation of step-flow growth in femtosecond pulsed laser deposition of Si on Si (100)-2×110.1116/1.1517257 ↗
41. Femtosecond pulsed laser deposition of ultra-hard boride thin films in ambient temperature10.1116/1.1722714 ↗
42. Thermophysical effects in laser processing of materials with picosecond and femtosecond pulses10.1063/1.360570 ↗
43. Thin film synthesis with ultrafast lasers
44. Critical density effects in femtosecond ablation plasmas and consequences for high intensity pulsed laser deposition10.1016/S0169-4332(02)01444-7 ↗