journal article·2020-12

ITO and graphene-covered Ag grids embedded in PET substrate by thermal roll imprinting for flexible organic solar cells

Vivekanandan Raman, Jeongdai Jo, Han-Ki Kim

Publisher page

Abstract

Abstract The development of a low-resistive flexible transparent conductive film (TCF) was demonstrated by showing thermal roll imprinted and an embedded Ag grid. The Ag-embedded TCF shows excellent optical and electrical properties when the secondary layer of ITO and graphene is coated onto the flexible embedded Ag grid substrate. The TCF showed an extremely high transmittance of 77.56% with ITO and 77.73% with graphene; moreover, it showed a very low sheet resistance of 4.05 Ω/□ and 14.0 Ω/□ with ITO and graphene, respectively. This high performance is achieved by thermal imprinting of channels at 15 μm wide so that the DI-based nano silver paste filled in the narrow channels using Dr. Blade's method, thus providing the embedded pattern of Ag grid in the flexible PET substrate. The succeeding TCF performance was validated by fabrication of an OSC (organic solar cell) that exhibits excellent power conversion efficiency (PCE) of 2.649% and 2.551% for the ITO-Ag grid and graphene-Ag grid, respectively. This indicates that the hybrid flexible electrode using an intaglio method can be applied to transparent conducting electrodes for highly efficient opto-electronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Ultrathin and lightweight organic solar cells with high flexibility10.1038/ncomms1772 ↗
3. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
4. Outlook brightens for plastic solar cells10.1126/science.332.6027.293 ↗
5. Highly flexible and stretchable carbon nanotube network electrodes prepared by simple brush painting for cost-effective flexible organic solar cells10.1016/j.carbon.2013.09.035 ↗
6. Mechanical flexibility of transparent PEDOT:PSS electrodes prepared by gravure printing for flexible organic solar cells10.1016/j.solmat.2011.07.009 ↗
7. Transparent and flexible PEDOT:PSS electrodes passivated by thin IZTO film using plasma-damage free linear facing target sputtering for flexible organic solar cells10.1016/j.solmat.2012.10.015 ↗
8. Brush-paintable and highly stretchable Ag nanowire and PEDOT:PSS hybrid electrodes10.1038/s41598-017-14951-3 ↗
9. Roll-to-roll sputtered Si-doped in 2 O 3/Ag/Si-doped in 2 O 3 multilayer as flexible and transparent anodes for flexible organic solar cells
10. Direct laser patterning of transparent ITO-Ag-ITO multilayer anodes for organic solar cells10.1016/j.apsusc.2014.12.017 ↗
11. Transparent ITO/Ag-Pd-Cu/ITO multilayer cathode use in inverted organic solar cells10.1063/1.4935187 ↗
12. Large area roll-to-roll sputtering of transparent ITO/Ag/ITO cathodes for flexible inverted organic solar cell modules10.1016/j.orgel.2015.12.009 ↗
13. Random mesh-like Ag networks prepared via self-assembled Ag nanoparticles for ITO-free flexible organic solar cells10.1016/j.solmat.2016.04.056 ↗
14. Fast switching ITO free Electrochromic devices10.1002/adfm.201302320 ↗
15. Flexible and semitransparent organic solar cells
16. Electromechanical reliability of flexible transparent electrode of gravure offset printed invisible silver-grid laminated with conductive polymer
17. Copper–nickel alloy plating to improve the contact resistivity of metal grid on silicon heterojunction solar cells10.1007/s13391-019-00134-x ↗
18. Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells10.1063/1.3394679 ↗
19. Roll-to-roll production of 30-inch graphene films for transparent electrodes10.1038/nnano.2010.132 ↗
20. Large area, continuous, few-layered graphene as anodes in organic photovoltaic devices
21. Continuous, highly flexible, and transparent graphene films by chemical vapor deposition for organic photovoltaics10.1021/nn901587x ↗
22. Multilayer graphene films as transparent electrodes for organic photovoltaic devices10.1016/j.solmat.2011.09.031 ↗
23. Tuning of a graphene-electrode work function to enhance the efficiency of organic bulk heterojunction photovoltaic cells with an inverted structure10.1063/1.3514551 ↗
24. Ultrathin, flexible and transparent graphene-based triboelectric nanogenerators for attachable curvature monitoring
25. Transfer-free graphene electrodes for super-flexible and semi-transparent perovskite solar cells fabricated under ambient air
26. Enhancement of stability of inverted flexible perovskite solar cells by employing graphene-quantum-dots hole transport layer and graphene transparent electrode codoped with gold nanoparticles and bis(trifluoromethanesulfonyl)amide10.1021/acssuschemeng.9b02336 ↗
27. Ultrathin anode buffer layer for enhancing performance of polymer solar cells10.1155/2014/846581 ↗
28. Rhenium oxide as the interfacial buffer layer for polymer photovoltaic cells10.1007/s11801-010-9290-5 ↗
29. Electric field effect in atomically
30. Large area, few-layer graphene films on arbitrary substrates by chemical vapor deposition10.1021/nl801827v ↗
31. Electronic confinement and10.1126/science.1125925 ↗
32. Graphene oxide-based transparent conductive films10.1016/j.pmatsci.2014.03.004 ↗
33. Novel approach to enhance efficiency of hybrid silicon-based solar cells via synergistic effects of polymer and carbon nanotube composite film10.1016/j.nanoen.2017.02.003 ↗
34. Fabrication of architectural structured polydopamine-functionalized reduced graphene oxide/carbon nanotube/PEDOT:PSS nanocomposites as flexible transparent electrodes for OLEDs10.1016/j.apsusc.2019.143997 ↗
35. Design of roll-to-roll printing equipment with multiple printing methods for multi-layer printing10.1063/1.4726018 ↗
36. Manufacturing ultra-high-frequency radio frequency identification tag antennas by multilayer printings10.1243/09544062JMES1610 ↗
37. Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes10.1039/c2nr31508d ↗
38. Fabrication of printed organic thin-film transistors using roll printing10.1143/JJAP.48.04C181 ↗
39. Development of a gravure offset printing system for the printing electrodes of flat panel display10.1016/j.tsf.2009.10.017 ↗
40. Organic photovoltaic devices with low resistance multilayer graphene transparent electrodes
41. Silver nanowire-based transparent, flexible, and conductive thin film10.1186/1556-276X-6-75 ↗
42. Scalable coating and properties of transparent, flexible, silver nanowire electrodes10.1021/nn1005232 ↗
43. Fully solution-processed inverted polymer solar cells with laminated nanowire electrodes10.1021/nn900758e ↗
44. A cracked polymer templated metal network as a transparent conducting electrode for ITO-free organic solar cells10.1039/C4CP02250E ↗
45. Invisible Ag grid embedded with ITO nanoparticle layer as a transparent hybrid electrode10.1016/j.solmat.2014.03.003 ↗
46. Granular electronic systems10.1103/RevModPhys.79.469 ↗
47. Coulomb effects in granular materials at not very low temperatures10.1103/PhysRevB.67.174205 ↗
48. Transition from insulating to non-insulating temperature dependence of the conductivity in granular metals10.1209/epl/i2002-00166-9 ↗
49. Transport properties of granular metals at low temperatures10.1103/PhysRevLett.91.246801 ↗
50. Improved electrical conductivity of graphene films integrated with metal nanowires10.1021/nl302870x ↗
51. Hybrid Ag nanowire transparent conductive electrodes with randomly oriented and grid-patterned Ag nanowire networks10.1038/s41598-017-11964-w ↗
52. Criteria for choosing transparent conductors materials properties relevant to transparent conductors optical and electrical performance of transparent conductors10.1557/mrs2000.151 ↗
53. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
54. Hegedus · 2012
55. Factors limiting the efficiency of molecular photovoltaic devices10.1103/PhysRevB.69.035337 ↗