journal article·2020-12

A new method of determining the slicing parameters for fixed diamond wire saw

Tengyun Liu, Peiqi Ge, Wenbo Bi, Yufei Gao

Publisher page

Abstract

Abstract The fixed diamond wire is widely used to slicing hard and brittle crystal material, such as mono-crystalline silicon, polycrystalline silicon, sapphire, silicon carbide, and so on. The slicing capability of fixed diamond wire should be matched reasonably with the properly slicing parameters to ensure the high slicing quality and slicing efficiency. While, there is a certain degree difference in slicing capability for different fixed diamond wires because of the location distribution, density, size distribution, and the protrusion height for diamond particles are all different. The worse slicing quality and lower slicing efficiency will be got if the slicing parameters is not matched reasonably with the slicing capability of fixed diamond wire. Hence, it is necessary to determine the proper slicing parameters for different fixed diamond wire according to its own characteristics to machining hard material with higher efficiency and quality. In this paper, a new method of determining the proper slicing parameters for fixed diamond wire is established. The wire bow angle is used as an index to describe the rationality of the determination for slicing parameters. The correctness and accuracy of this method are verified by a multi wire saw slicing mono-crystalline silicon ingot experiment. The wire bow angle and normal cutting force are obtained respectively by theoretical and experimental results. It is found that the experimental results of wire bow angle are around 3°, and this shows that this new method of determining processing parameter is feasible. In addition, the theoretical and experimental results of the normal cutting force are compared. These results all indicate that the slicing parameters determined in this paper match well with the slicing performance of the fixed diamond wire used in the experiment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. 2019
2. Diamond wire sawing of solar silicon wafers: a sustainable manufacturing alternative to loose abrasive slurry sawing10.1016/j.promfg.2018.02.156 ↗
3. Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon10.1016/j.precisioneng.2017.04.011 ↗
4. An experimental research on the force and energy during the sapphire sawing using reciprocating electroplated diamond wire saw10.1115/1.4038109 ↗
5. Effect of wear of diamond wire on surface morphology, roughness and subsurface damage of silicon wafers10.1016/j.wear.2016.07.009 ↗
6. Analyses of diamond wire sawn wafers: effect of various cutting parameters
7. Determination of the impact of the wire velocity on the surface damage of diamond wire sawn silicon wafers10.1016/j.egypro.2015.07.124 ↗
8. Wire sawing technology: a state-of-the-art review10.1016/j.precisioneng.2015.08.008 ↗
9. Rietzschel · 2008
10. Experiment study on electroplated diamond wire saw slicing single-crystal silicon10.1016/j.mssp.2016.08.003 ↗
11. Effect of initial deflection of diamond wire on thickness variation of sapphire wafer in multi-wire saw
12. Distribution of diamond grains in fixed abrasive wire sawing process10.1007/s00170-014-5782-y ↗
13. Prediction of sawing force for single-crystal silicon carbide with fixed abrasive diamond wire saw10.1016/j.mssp.2017.01.014 ↗
14. Roughness damage evolution due to wire saw process10.1007/s12541-011-0126-4 ↗
15. Experimental investigation on the machining characteristics of single-crystal SiC sawing with the fixed diamond wire10.1007/s00170-015-7250-8 ↗
16. Determination of cutting parameters for silicon wafer with a Diamond Wire Saw using an artificial neural network10.1016/j.solener.2017.04.022 ↗
17. Depth of cut for single abrasive and cutting force in resin bonded diamond wire sawing10.1007/s00170-016-8896-6 ↗
18. Basic mechanisms and models of multi‐wire sawing10.1002/adem.200400578 ↗
19. On the effect of crystallographic orientation on ductile material removal in silicon10.1016/j.precisioneng.2004.05.004 ↗
20. Galerkin-based modal analysis on the vibration of wire–slurry system in wafer slicing using a wire saw10.1016/j.jsv.2004.04.018 ↗
21. Loss of wire tension in the wire web during the slurry based multi wire sawing process10.1016/j.solmat.2013.05.047 ↗