A new rapid synthesis of thermoelectric Sb2Te3 ingots using selective laser melting 3D printing
Source abstract
Abstract
Abstract The conventional synthesis and forming process methods of commercialized thermoelectric materials and thermoelectric devices are energy and time consuming. Fortunately, advanced 3D printing techniques enable simplification for the rapid fabrication of thermoelectric materials. Herein, we report a new synthesis method of Sb2Te3 by selective laser melting (SLM) printing technique. A mixture of individual elemental powder of Sb and Te serves as starting materials for the SLM process. The effect of the high laser energy density on the synthesized Sb2Te3 structure and thermoelectric performance is also investigated, and the optimal process parameters are determined. The phase transition process for the Sb/Te powder during SLM is imitated by performing a thermogravimetric analysis (TGA) simultaneously. The power factor of the ingot prepared by SLM increases up to 19 μW/(cm K2) at 50 °C. These results indicate that SLM can effectively produce Sb2Te3-based materials. This work opens a new route for the design and synthesis of thermoelectric materials and corresponding devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Machine Learning in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
2. Flexible thermoelectric materials and generators: challenges and innovations10.1002/adma.201807916 ↗
3. Thermoelectric generators: alternative power supply for wearable electrocardiographic systems10.1002/advs.202001362 ↗
4. 3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks10.1038/s41560-017-0071-2 ↗
5. Jaziri · 2019
6. Flexible thermoelectric generators for body heat harvesting–Enhanced device performance using high thermal conductivity elastomer encapsulation on liquid metal interconnects10.1016/j.apenergy.2019.114370 ↗
7. Smart textile‐integrated microelectronic systems for wearable applications10.1002/adma.201901958 ↗
8. A linear-to-rotary hybrid nanogenerator for high-performance wearable biomechanical energy harvesting10.1016/j.nanoen.2019.104235 ↗
9. Wearable thermoelectric generator to harvest body heat for powering a miniaturized accelerometer10.1016/j.apenergy.2018.02.062 ↗
10. Wearable thermoelectrics for personalized thermoregulation10.1126/sciadv.aaw0536 ↗
11. Yttrium-doped Sb2Te3: a promising material for phase-change memory10.1021/acsami.6b08700 ↗
12. Thermoelectric properties of monolayer Sb2Te310.1063/1.5051470 ↗
13. Effect of annealing on thermoelectric properties of eutectic PbTe–Sb2Te3 composite with self-assembled lamellar structure10.1016/j.intermet.2013.04.018 ↗
14. High thermoelectric performance of few-quintuple Sb2Te3 nanofilms10.1016/j.nanoen.2017.11.043 ↗
15. Enhanced thermoelectric properties of Sb2Te3 and Bi2Te3 films for flexible thermal sensors10.1016/j.jallcom.2018.09.324 ↗
16. Enhancing thermoelectric properties of Sb2Te3 flexible thin film through microstructure control and crystal preferential orientation engineering10.1016/j.apsusc.2017.04.074 ↗
17. Synergistical tuning interface barrier and phonon propagation in Au-Sb2Te3 nanoplate for boosting thermoelectric performance10.1021/acs.jpclett.9b02312 ↗
18. High-performance μ-thermoelectric device based on Bi2Te3/Sb2Te3 p–n junctions10.1021/acsami.9b13254 ↗
19. Recent advances in thermoelectric materials10.1016/j.pmatsci.2016.07.002 ↗
20. A review on bismuth telluride (Bi2Te3) nanostructure for thermoelectric applications10.1016/j.rser.2017.10.112 ↗
21. Enhanced performance thermoelectric module having asymmetrical legs10.1016/j.enconman.2017.06.087 ↗
22. High-efficiency and stable thermoelectric module based on liquid-like materials10.1016/j.joule.2019.04.010 ↗
23. Performance evaluation of a novel thermoelectric module with BiSbTeSe-based material10.1016/j.apenergy.2019.01.139 ↗
24. Fabrication and thermoelectric properties of n-type CoSb2.85Te0.15 using selective laser melting10.1021/acsami.8b01564 ↗
25. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends10.1016/j.jmst.2018.09.004 ↗
26. Recent advances on high-entropy alloys for 3D printing10.1002/adma.201903855 ↗
27. Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: a review10.1016/j.ijmachtools.2018.01.003 ↗
28. Rapid processing and assembly of semiconductor thermoelectric materials for energy conversion devices10.1016/j.matlet.2016.07.152 ↗
29. Influences of energy density on microstructure and consolidation of selective laser melted bismuth telluride thermoelectric powder10.1016/j.jmapro.2016.12.008 ↗
30. Pulsed laser melting of bismuth telluride thermoelectric materials10.1016/j.jmapro.2019.04.021 ↗
31. Non-equilibrium synthesis and characterization of n-type Bi2Te2.7Se0.3 thermoelectric material prepared by rapid laser melting and solidification10.1039/C7RA02677C ↗
32. 3D Printing of highly textured bulk thermoelectric materials: mechanically robust BiSbTe alloys with superior performance10.1039/C9EE02044F ↗
33. Rapid synthesis of thermoelectric compounds by laser melting10.1016/j.matdes.2016.05.093 ↗
34. Electrical and thermoelectrical properties of undoped Bi2Te3-Sb2Te3 and Bi2Te3-Sb2Te3-Sb2Se3 single crystals10.1016/0022-3697(91)90151-O ↗
35. Design of highly efficient thermoelectric materials: tailoring reciprocal-space properties by real-space modification10.1002/adma.201802000 ↗
36. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗