The hierarchical nanostructured Co-doped WO3/carbon and their improved acetone sensing perfomance
Source abstract
Abstract
Abstract Hierarchical nanostructured Co-doped WO3 with carbon as template has been successfully synthesised through facile sol-gel method. The synthesised Co-doped WO3 was characterized by X-ray diffraction, Scanning electron microscopy, Transmission electron microscopy, Energy dispersive X-ray spectrometry, and Brunauer-Emmett-Teller and X-ray photoelectron spectroscopy. The gas sensing properties of WO3 doped with Co from 0 to 0.8 wt % were also investigated on various VOCs. The fabricated sensor based on 0.6 wt% Co-doped WO3 with carbon as a template showed good sensitivity, selectivity, fast response and recovery time towards 1.5 ppm of acetone at 50 °C under 90% relative humidity. The excellent gas sensing properties could be attributed to high surface area, small crystallite size, defect of WO3 and Co catalysis effect which promotes gas adsorption and most importantly the stabilized monoclinic phase of WO3, which accounts for the good selectivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Sensing technologies for detection of acetone in human breath for diabetes diagnosis and monitoring10.3390/diagnostics8010012 ↗
2. Nanorods assembled hierarchical urchin-like WO3 nanostructures: hydrothermal synthesis, characterization, and their gas sensing properties10.1016/j.jallcom.2017.01.232 ↗
3. Basic aspects and challenges of semiconductor gas sensors10.1557/S0883769400052465 ↗
4. Gas sensors using hierarchical and hollow oxide nanostructures: overview10.1016/j.snb.2009.04.026 ↗
5. Toward innovations of gas sensor technology10.1016/j.snb.2004.12.075 ↗
6. Facile and simple synthesis of novel iron oxide foam and used as acetone gas sensor with sub-ppm level
7. Crystalline mesoporous tungsten oxide nanoplate monoliths synthesized by directed soft template method for highly sensitive NO2 gas sensor applications10.1016/j.materresbull.2012.10.047 ↗
8. Highly selective n-butanol gas sensor based on mesoporous SnO2 prepared with hydrothermal treatment10.1016/j.snb.2014.04.049 ↗
9. Breath acetone monitoring by portable Si: WO 3 gas sensors10.1016/j.aca.2012.06.002 ↗
10. Nanoscale PdO catalyst functionalized Co3O4 hollow nanocages using MOF templates for selective detection of acetone molecules in exhaled breath10.1021/acsami.7b01284 ↗
11. Tungsten trioxide nanotubes with high sensitive and selective properties to acetone10.1016/j.snb.2013.12.078 ↗
12. Improved selective acetone sensing properties of Co-doped ZnO nanofibers by electrospinning10.1016/j.snb.2011.01.047 ↗
13. Enhanced selective acetone sensing characteristics based on Co-doped WO3 hierarchical flower-like nanostructures assembled with nanoplates10.1016/j.snb.2016.05.140 ↗
14. Rapid acetone detection using indium loaded WO3/SnO2 nanohybrid sensor10.1016/j.snb.2017.06.179 ↗
15. Highly enhanced acetone sensing performance of porous C-doped WO3 hollow spheres by carbon spheres as templates10.1016/j.snb.2016.08.069 ↗
16. Breath analysis for medical diagnosis
17. Multi-dimensional roles of ketone bodies in fuel metabolism, signaling, and therapeutics10.1016/j.cmet.2016.12.022 ↗
18. Guiding ketogenic diet with breath acetone sensors10.3390/s18113655 ↗
19. Noninvasive body fat burn monitoring from exhaled acetone with Si-doped WO3-sensing nanoparticles10.1021/acs.analchem.7b02843 ↗
20. Effects of cobalt doping on nitric oxide, acetone and ethanol sensing performances of FSP-made SnO2 nanoparticles10.1016/j.snb.2015.01.028 ↗
21. Development of high sensitivity ethanol gas sensor based on Co-doped SnO2 nanoparticles by microwave irradiation technique10.1016/j.cap.2013.05.016 ↗
22. Chemical and structural properties of carbonaceous products obtained by hydrothermal carbonization of saccharides10.1002/chem.200802097 ↗
23. Sensitivity, selectivity, and stability of gas-sensitive metal-oxide nanostructures
24. Highly enhanced acetone sensing performance of porous C-doped WO3 hollow spheres by carbon spheres as templates10.1016/j.snb.2016.08.069 ↗
25. Strain and grain size of TiO2 nanoparticles from TEM, Raman spectroscopy and XRD: the revisiting of the Williamson-Hall plot method10.1016/j.rinp.2018.03.008 ↗
26. Preparation and gas sensing properties of partially broken WO3 nanotubes10.1016/j.vacuum.2014.12.019 ↗
27. Acetone detection properties of single crystalline tungsten oxide plates synthesized by hydrothermal method using cetyltrimethyl ammonium bromide supermolecular template10.1016/j.snb.2011.12.076 ↗
28. Acetone detection properties of single crystalline tungsten oxide plates synthesized by hydrothermal method using cetyltrimethyl ammonium bromide supermolecular template10.1016/j.snb.2011.12.076 ↗
29. Breath acetone monitoring by portable Si: WO 3 gas sensors10.1016/j.aca.2012.06.002 ↗
30. Semiconductor gas sensors10.1016/0250-6874(81)80054-6 ↗
31. Sensing behavior of CuO-loaded SnO2 element for H2S detection10.1246/cl.1991.575 ↗
32. Anomalous conductivity-type transition sensing behaviors of n-type porous α-Fe2O3 nanostructures toward H2S10.1016/j.mseb.2011.02.002 ↗
33. Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview10.1016/j.snb.2013.11.005 ↗
34. Nanoparticles-assembled Co3O4 nanorods p-type nanomaterials: one-pot synthesis and toluene-sensing properties10.1016/j.snb.2014.04.074 ↗
35. High toluene sensing properties of NiO–SnO2 composite nanofiber sensors operating at 330° C10.1016/j.snb.2011.08.007 ↗
36. Sensitivity, selectivity, and stability of gas-sensitive metal-oxide nanostructures
37. Reduced-temperature ethanol sensing characteristics of flower-like ZnO nanorods synthesized by a sonochemical method10.1088/0957-4484/17/18/002 ↗
38. Highly sensitive and selective acetone sensor based on C-doped WO 3 for potential diagnosis of diabetes mellitus10.1016/j.snb.2014.04.015 ↗
39. Determination of acetone in human breath by gas chromatography–mass spectrometry and solid-phase microextraction with on-fiber derivatization10.1016/S1570-0232(04)00657-9 ↗
40. The effect of Co and in combinational or individual doping on the structural, optical and selective sensing properties of ZnO nanoparticles10.1016/j.snb.2017.02.039 ↗
41. Thermally stable, silica-doped ε-WO3 for sensing of acetone in the human breath10.1021/cm1001576 ↗
42. Ferroelectric WO3 nanoparticles for acetone selective detection10.1021/cm800761e ↗
43. Facile synthesis and gas sensing properties of La2O3–WO3 nanofibers10.1016/j.snb.2015.06.114 ↗
44. Ethanol-sensing performance of tin dioxide octahedral nanocrystals with exposed high-energy {111} and {332} facets10.1039/c4ta00844h ↗
45. Large-scale synthesis of hydrated tungsten oxide 3D architectures by a simple chemical solution route and their gas-sensing properties10.1039/c1jm11292a ↗
46. Selective acetone gas sensors using porous WO3–Cr2O3 thin films prepared by sol–gel method10.1016/j.tsf.2011.12.003 ↗
47. Acetone detection properties of single crystalline tungsten oxide plates synthesized by hydrothermal method using cetyltrimethyl ammonium bromide supermolecular template10.1016/j.snb.2011.12.076 ↗
48. Porous metal oxides as gas sensors10.1002/chem.200700927 ↗
49. Highly sensitive and selective acetone sensor based on C-doped WO3 for potential diagnosis of diabetes mellitus10.1016/j.snb.2014.04.015 ↗
50. Acetone Sensing of Au and Pd-decorated WO3 nanorod sensors10.1016/j.snb.2014.11.106 ↗