journal article·2020-01

Atomistic simulation of influence of laser nano-structured diamond abrasive on the polishing behavior of silicon

Houfu Dai, Yuqi Zhou, Fa Zhang

Publisher page

Abstract

Abstract Micro/nano-structured surfaces often present many interesting behaviors and lend themselves to advanced functions. To further improve the polishing performance of diamond abrasives, large scale MD (molecular dynamics) simulations are employed to investigate the ultra-precision mechanical polishing of monocrystalline silicon with laser-fabricated nano-structured diamond abrasive. The material removal mechanism during polishing using structured diamond abrasive is studied in detail. The effects of the structured depth, structured width, structured factor, and structured pattern on the material deformation are studied in detail by analyzing the surface morphologies of the polished surface, normal stresses, shear stress, polishing temperature, atomic coordination numbers, von Mises stress, hydrostatic stress, polishing force, and dislocation extraction algorithm (DXA). The simulation results show that a bigger structured width abrasive, smaller structured depth abrasive,higher structured factor abrasive, or rectangle pattern abrasive would cause a larger material removal rate. Moreover, the abrasive with a smaller structured width, smaller structured depth, or higher structured factor tends to polish silicon materials in a more ductile mode. The abrasive with a bigger structured width has a lower hydrostatic stress, better polished surface, and less defect atoms. However, the abrasive with a bigger structured width, smaller structured depth, or higher structured factor results in a larger normal polishing force. Polishing using an abrasive with a higher structured factor leads to more polishing heat. In addition, the abrasive with 33.3% structured factor polishing can reduce the tangential polishing forces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Advances in engineered surfaces for functional performance10.1016/j.cirp.2008.09.003 ↗
2. Microfabricated textured surfaces for super-hydrophobicity investigations10.1016/j.mee.2004.12.093 ↗
3. Development of cutting tools with microscale and nanoscale textures to improve frictional behavior10.1016/j.precisioneng.2008.07.005 ↗
4. A new two-dimensional ultrasonic assisted grinding (2D-UAG) method and its fundamental performance in monocrystal silicon machining10.1016/j.ijmachtools.2010.04.005 ↗
5. Lapping of single crystal diamond tools10.1016/S0007-8506(07)60585-X ↗
6. Review of micro/nano machining by utilizing elliptical vibration cutting10.1016/j.ijmachtools.2016.04.008 ↗
7. On-machine dry electric discharge truing of diamond wheels for micro-structured surfaces grinding10.1016/j.ijmachtools.2014.09.011 ↗
8. Preferentially oriented diamond micro-arrays: a laser patterning technique and preliminary evaluation of their cutting forces and wear characteristics10.1016/j.ijmachtools.2009.08.007 ↗
9. Cooling action of grinding fluid in shallow grinding10.1016/0890-6955(93)90060-8 ↗
10. A general thermal model for grinding with slotted or segmented wheel10.1016/S0007-8506(07)62215-X ↗
11. Precision grinding of optical glass with laser micro-structured coarse-grained diamond wheels10.1016/j.jmatprotec.2013.12.013 ↗
12. Development of a cutting tool with a nano/micro-textured surface—improvement of anti-adhesive effect by considering the texture patterns10.1016/j.precisioneng.2008.11.004 ↗
13. Analysis of surface generation in the ultraprecision polishing of freeform surfaces
14. A real-time polishing force control system for ultraprecision finishing of micro-optics10.1016/j.precisioneng.2013.01.014 ↗
15. Ultraprecision finishing of micro-aspheric surface by ultrasonic two-axis vibration assisted polishing10.1016/j.cirp.2010.03.117 ↗
16. A numerical study of ultraprecision machining of monocrystalline silicon with laser nano-structured diamond tools by atomistic simulation10.1016/j.apsusc.2016.10.014 ↗
17. Influence of laser nano-structured diamond tools on the cutting behaviour of silicon by molecular dynamics simulation10.1039/C6RA27070K ↗
18. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
19. Atomic scale deformation in silicon monocrystals induced by two-body and three-body contact sliding10.1016/S0301-679X(98)00064-4 ↗
20. Atomistic structure of monocrystalline silicon in surface nano-modification10.1088/0957-4484/15/1/020 ↗
21. A study on phase transformation of monocrystalline silicon due to ultra-precision polishing by molecular dynamics simulation10.1063/1.4763462 ↗
22. Molecular dynamics simulation of self-rotation effects on ultra-precision polishing of single-crystal copper10.1063/1.4824625 ↗
23. Structuring of CBN grinding tools by ultrashort pulse laser ablation10.1016/j.procir.2014.03.093 ↗
24. Influence of microstructure on the cutting behaviour of silicon10.1016/j.actamat.2015.11.046 ↗
25. Tribochemical reactions and graphitization of diamond-like carbon against alumina give volcano-type temperature dependence of friction coefficients: a tight-binding quantum chemical molecular dynamics simulation10.1016/j.carbon.2018.03.034 ↗
26. Screened empirical bond-order potentials for Si-C10.1103/PhysRevB.87.205410 ↗
27. A numerical study of residual stress induced in machined silicon surfaces by molecular dynamics simulation10.1007/s00339-013-7977-8 ↗
28. The influence of different cutting speeds on the cutting force and strain–stress behaviors of single crystal copper during nano-scale orthogonal cutting10.1016/j.jmatprotec.2007.11.259 ↗
29. Molecular dynamics simulation of subsurface deformed layers in AFM-based nanometric cutting process10.1016/j.apsusc.2008.01.096 ↗
30. Molecular dynamics study on friction due to ploughing and adhesion in nanometric scratching process10.1007/s11249-010-9681-6 ↗
31. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
32. Visualization and analysis of atomistic simulation data with OVITO–the open visualization tool
33. Molecular dynamics simulation study of deformation mechanisms in 3C–SiC during nanometric cutting at elevated temperatures10.1016/j.msea.2015.11.100 ↗
34. The effect of tool geometry on subsurface damage and material removal in nanometric cutting single-crystal silicon by a molecular dynamics simulation10.1007/s00339-016-0319-x ↗
35. Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process10.1016/j.triboint.2012.06.027 ↗
36. Atomistic simulation of structural phase transformations in monocrystalline silicon induced by nanoindentation10.1088/0957-4484/17/9/031 ↗
37. A molecular dynamics study of phase transformations in mono-crystalline Si under nanoindentation10.1007/s00339-008-4633-9 ↗
38. Extracting dislocations and non-dislocation crystal defects from atomistic simulation data10.1088/0965-0393/18/8/085001 ↗
39. Existence of two twinning-mediated plastic deformation modes in Au nanowhiskers10.1016/j.actamat.2012.03.018 ↗